You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
602 lines
15 KiB
602 lines
15 KiB
/*
|
|
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
|
|
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
|
|
* Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
|
|
*
|
|
* Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
* Copyright (C) 2002 Alan Cox <alan@redhat.com>
|
|
* ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
|
|
* Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
|
|
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
*
|
|
* (U)DMA capable version of ali 1533/1543(C), 1535(D)
|
|
*
|
|
**********************************************************************
|
|
* 9/7/99 --Parts from the above author are included and need to be
|
|
* converted into standard interface, once I finish the thought.
|
|
*
|
|
* Recent changes
|
|
* Don't use LBA48 mode on ALi <= 0xC4
|
|
* Don't poke 0x79 with a non ALi northbridge
|
|
* Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang)
|
|
* Allow UDMA6 on revisions > 0xC4
|
|
*
|
|
* Documentation
|
|
* Chipset documentation available under NDA only
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define DRV_NAME "alim15x3"
|
|
|
|
/*
|
|
* Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
|
|
* (this is DANGEROUS and could result in data corruption).
|
|
*/
|
|
static int wdc_udma;
|
|
|
|
module_param(wdc_udma, bool, 0);
|
|
MODULE_PARM_DESC(wdc_udma,
|
|
"allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
|
|
|
|
/*
|
|
* ALi devices are not plug in. Otherwise these static values would
|
|
* need to go. They ought to go away anyway
|
|
*/
|
|
|
|
static u8 m5229_revision;
|
|
static u8 chip_is_1543c_e;
|
|
static struct pci_dev *isa_dev;
|
|
|
|
/**
|
|
* ali_set_pio_mode - set host controller for PIO mode
|
|
* @drive: drive
|
|
* @pio: PIO mode number
|
|
*
|
|
* Program the controller for the given PIO mode.
|
|
*/
|
|
|
|
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
|
|
int s_time = t->setup, a_time = t->active, c_time = t->cycle;
|
|
u8 s_clc, a_clc, r_clc;
|
|
unsigned long flags;
|
|
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
|
|
int port = hwif->channel ? 0x5c : 0x58;
|
|
int portFIFO = hwif->channel ? 0x55 : 0x54;
|
|
u8 cd_dma_fifo = 0, unit = drive->dn & 1;
|
|
|
|
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
|
|
s_clc = 0;
|
|
if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
|
|
a_clc = 0;
|
|
|
|
if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
|
|
r_clc = 1;
|
|
} else {
|
|
if (r_clc >= 16)
|
|
r_clc = 0;
|
|
}
|
|
local_irq_save(flags);
|
|
|
|
/*
|
|
* PIO mode => ATA FIFO on, ATAPI FIFO off
|
|
*/
|
|
pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
|
|
if (drive->media==ide_disk) {
|
|
if (unit) {
|
|
pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
|
|
} else {
|
|
pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
|
|
}
|
|
} else {
|
|
if (unit) {
|
|
pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
|
|
} else {
|
|
pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
|
|
}
|
|
}
|
|
|
|
pci_write_config_byte(dev, port, s_clc);
|
|
pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/**
|
|
* ali_udma_filter - compute UDMA mask
|
|
* @drive: IDE device
|
|
*
|
|
* Return available UDMA modes.
|
|
*
|
|
* The actual rules for the ALi are:
|
|
* No UDMA on revisions <= 0x20
|
|
* Disk only for revisions < 0xC2
|
|
* Not WDC drives on M1543C-E (?)
|
|
*/
|
|
|
|
static u8 ali_udma_filter(ide_drive_t *drive)
|
|
{
|
|
if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
|
|
if (drive->media != ide_disk)
|
|
return 0;
|
|
if (wdc_udma == 0 && chip_is_1543c_e &&
|
|
strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
|
|
return 0;
|
|
}
|
|
|
|
return drive->hwif->ultra_mask;
|
|
}
|
|
|
|
/**
|
|
* ali_set_dma_mode - set host controller for DMA mode
|
|
* @drive: drive
|
|
* @speed: DMA mode
|
|
*
|
|
* Configure the hardware for the desired IDE transfer mode.
|
|
*/
|
|
|
|
static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
u8 speed1 = speed;
|
|
u8 unit = drive->dn & 1;
|
|
u8 tmpbyte = 0x00;
|
|
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
|
|
|
|
if (speed == XFER_UDMA_6)
|
|
speed1 = 0x47;
|
|
|
|
if (speed < XFER_UDMA_0) {
|
|
u8 ultra_enable = (unit) ? 0x7f : 0xf7;
|
|
/*
|
|
* clear "ultra enable" bit
|
|
*/
|
|
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
|
|
tmpbyte &= ultra_enable;
|
|
pci_write_config_byte(dev, m5229_udma, tmpbyte);
|
|
|
|
/*
|
|
* FIXME: Oh, my... DMA timings are never set.
|
|
*/
|
|
} else {
|
|
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
|
|
tmpbyte &= (0x0f << ((1-unit) << 2));
|
|
/*
|
|
* enable ultra dma and set timing
|
|
*/
|
|
tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
|
|
pci_write_config_byte(dev, m5229_udma, tmpbyte);
|
|
if (speed >= XFER_UDMA_3) {
|
|
pci_read_config_byte(dev, 0x4b, &tmpbyte);
|
|
tmpbyte |= 1;
|
|
pci_write_config_byte(dev, 0x4b, tmpbyte);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ali15x3_dma_setup - begin a DMA phase
|
|
* @drive: target device
|
|
*
|
|
* Returns 1 if the DMA cannot be performed, zero on success.
|
|
*/
|
|
|
|
static int ali15x3_dma_setup(ide_drive_t *drive)
|
|
{
|
|
if (m5229_revision < 0xC2 && drive->media != ide_disk) {
|
|
if (rq_data_dir(drive->hwif->hwgroup->rq))
|
|
return 1; /* try PIO instead of DMA */
|
|
}
|
|
return ide_dma_setup(drive);
|
|
}
|
|
|
|
/**
|
|
* init_chipset_ali15x3 - Initialise an ALi IDE controller
|
|
* @dev: PCI device
|
|
*
|
|
* This function initializes the ALI IDE controller and where
|
|
* appropriate also sets up the 1533 southbridge.
|
|
*/
|
|
|
|
static unsigned int init_chipset_ali15x3(struct pci_dev *dev)
|
|
{
|
|
unsigned long flags;
|
|
u8 tmpbyte;
|
|
struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
|
|
|
|
m5229_revision = dev->revision;
|
|
|
|
isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (m5229_revision < 0xC2) {
|
|
/*
|
|
* revision 0x20 (1543-E, 1543-F)
|
|
* revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E)
|
|
* clear CD-ROM DMA write bit, m5229, 0x4b, bit 7
|
|
*/
|
|
pci_read_config_byte(dev, 0x4b, &tmpbyte);
|
|
/*
|
|
* clear bit 7
|
|
*/
|
|
pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
|
|
/*
|
|
* check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
|
|
*/
|
|
if (m5229_revision >= 0x20 && isa_dev) {
|
|
pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
|
|
chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* 1543C-B?, 1535, 1535D, 1553
|
|
* Note 1: not all "motherboard" support this detection
|
|
* Note 2: if no udma 66 device, the detection may "error".
|
|
* but in this case, we will not set the device to
|
|
* ultra 66, the detection result is not important
|
|
*/
|
|
|
|
/*
|
|
* enable "Cable Detection", m5229, 0x4b, bit3
|
|
*/
|
|
pci_read_config_byte(dev, 0x4b, &tmpbyte);
|
|
pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08);
|
|
|
|
/*
|
|
* We should only tune the 1533 enable if we are using an ALi
|
|
* North bridge. We might have no north found on some zany
|
|
* box without a device at 0:0.0. The ALi bridge will be at
|
|
* 0:0.0 so if we didn't find one we know what is cooking.
|
|
*/
|
|
if (north && north->vendor != PCI_VENDOR_ID_AL)
|
|
goto out;
|
|
|
|
if (m5229_revision < 0xC5 && isa_dev)
|
|
{
|
|
/*
|
|
* set south-bridge's enable bit, m1533, 0x79
|
|
*/
|
|
|
|
pci_read_config_byte(isa_dev, 0x79, &tmpbyte);
|
|
if (m5229_revision == 0xC2) {
|
|
/*
|
|
* 1543C-B0 (m1533, 0x79, bit 2)
|
|
*/
|
|
pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04);
|
|
} else if (m5229_revision >= 0xC3) {
|
|
/*
|
|
* 1553/1535 (m1533, 0x79, bit 1)
|
|
*/
|
|
pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
|
|
}
|
|
}
|
|
|
|
out:
|
|
/*
|
|
* CD_ROM DMA on (m5229, 0x53, bit0)
|
|
* Enable this bit even if we want to use PIO.
|
|
* PIO FIFO off (m5229, 0x53, bit1)
|
|
* The hardware will use 0x54h and 0x55h to control PIO FIFO.
|
|
* (Not on later devices it seems)
|
|
*
|
|
* 0x53 changes meaning on later revs - we must no touch
|
|
* bit 1 on them. Need to check if 0x20 is the right break.
|
|
*/
|
|
if (m5229_revision >= 0x20) {
|
|
pci_read_config_byte(dev, 0x53, &tmpbyte);
|
|
|
|
if (m5229_revision <= 0x20)
|
|
tmpbyte = (tmpbyte & (~0x02)) | 0x01;
|
|
else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
|
|
tmpbyte |= 0x03;
|
|
else
|
|
tmpbyte |= 0x01;
|
|
|
|
pci_write_config_byte(dev, 0x53, tmpbyte);
|
|
}
|
|
pci_dev_put(north);
|
|
pci_dev_put(isa_dev);
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Cable special cases
|
|
*/
|
|
|
|
static const struct dmi_system_id cable_dmi_table[] = {
|
|
{
|
|
.ident = "HP Pavilion N5430",
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
|
|
DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
|
|
},
|
|
},
|
|
{
|
|
.ident = "Toshiba Satellite S1800-814",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static int ali_cable_override(struct pci_dev *pdev)
|
|
{
|
|
/* Fujitsu P2000 */
|
|
if (pdev->subsystem_vendor == 0x10CF &&
|
|
pdev->subsystem_device == 0x10AF)
|
|
return 1;
|
|
|
|
/* Mitac 8317 (Winbook-A) and relatives */
|
|
if (pdev->subsystem_vendor == 0x1071 &&
|
|
pdev->subsystem_device == 0x8317)
|
|
return 1;
|
|
|
|
/* Systems by DMI */
|
|
if (dmi_check_system(cable_dmi_table))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ali_cable_detect - cable detection
|
|
* @hwif: IDE interface
|
|
*
|
|
* This checks if the controller and the cable are capable
|
|
* of UDMA66 transfers. It doesn't check the drives.
|
|
* But see note 2 below!
|
|
*
|
|
* FIXME: frobs bits that are not defined on newer ALi devicea
|
|
*/
|
|
|
|
static u8 ali_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
unsigned long flags;
|
|
u8 cbl = ATA_CBL_PATA40, tmpbyte;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (m5229_revision >= 0xC2) {
|
|
/*
|
|
* m5229 80-pin cable detection (from Host View)
|
|
*
|
|
* 0x4a bit0 is 0 => primary channel has 80-pin
|
|
* 0x4a bit1 is 0 => secondary channel has 80-pin
|
|
*
|
|
* Certain laptops use short but suitable cables
|
|
* and don't implement the detect logic.
|
|
*/
|
|
if (ali_cable_override(dev))
|
|
cbl = ATA_CBL_PATA40_SHORT;
|
|
else {
|
|
pci_read_config_byte(dev, 0x4a, &tmpbyte);
|
|
if ((tmpbyte & (1 << hwif->channel)) == 0)
|
|
cbl = ATA_CBL_PATA80;
|
|
}
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return cbl;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
|
|
/**
|
|
* init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff
|
|
* @hwif: interface to configure
|
|
*
|
|
* Obtain the IRQ tables for an ALi based IDE solution on the PC
|
|
* class platforms. This part of the code isn't applicable to the
|
|
* Sparc and PowerPC systems.
|
|
*/
|
|
|
|
static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
u8 ideic, inmir;
|
|
s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
|
|
1, 11, 0, 12, 0, 14, 0, 15 };
|
|
int irq = -1;
|
|
|
|
if (dev->device == PCI_DEVICE_ID_AL_M5229)
|
|
hwif->irq = hwif->channel ? 15 : 14;
|
|
|
|
if (isa_dev) {
|
|
/*
|
|
* read IDE interface control
|
|
*/
|
|
pci_read_config_byte(isa_dev, 0x58, &ideic);
|
|
|
|
/* bit0, bit1 */
|
|
ideic = ideic & 0x03;
|
|
|
|
/* get IRQ for IDE Controller */
|
|
if ((hwif->channel && ideic == 0x03) ||
|
|
(!hwif->channel && !ideic)) {
|
|
/*
|
|
* get SIRQ1 routing table
|
|
*/
|
|
pci_read_config_byte(isa_dev, 0x44, &inmir);
|
|
inmir = inmir & 0x0f;
|
|
irq = irq_routing_table[inmir];
|
|
} else if (hwif->channel && !(ideic & 0x01)) {
|
|
/*
|
|
* get SIRQ2 routing table
|
|
*/
|
|
pci_read_config_byte(isa_dev, 0x75, &inmir);
|
|
inmir = inmir & 0x0f;
|
|
irq = irq_routing_table[inmir];
|
|
}
|
|
if(irq >= 0)
|
|
hwif->irq = irq;
|
|
}
|
|
}
|
|
#else
|
|
#define init_hwif_ali15x3 NULL
|
|
#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
|
|
|
|
/**
|
|
* init_dma_ali15x3 - set up DMA on ALi15x3
|
|
* @hwif: IDE interface
|
|
* @d: IDE port info
|
|
*
|
|
* Set up the DMA functionality on the ALi 15x3.
|
|
*/
|
|
|
|
static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
|
|
const struct ide_port_info *d)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
unsigned long base = ide_pci_dma_base(hwif, d);
|
|
|
|
if (base == 0)
|
|
return -1;
|
|
|
|
hwif->dma_base = base;
|
|
|
|
if (ide_pci_check_simplex(hwif, d) < 0)
|
|
return -1;
|
|
|
|
if (ide_pci_set_master(dev, d->name) < 0)
|
|
return -1;
|
|
|
|
if (!hwif->channel)
|
|
outb(inb(base + 2) & 0x60, base + 2);
|
|
|
|
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
|
|
hwif->name, base, base + 7);
|
|
|
|
if (ide_allocate_dma_engine(hwif))
|
|
return -1;
|
|
|
|
hwif->dma_ops = &sff_dma_ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ide_port_ops ali_port_ops = {
|
|
.set_pio_mode = ali_set_pio_mode,
|
|
.set_dma_mode = ali_set_dma_mode,
|
|
.udma_filter = ali_udma_filter,
|
|
.cable_detect = ali_cable_detect,
|
|
};
|
|
|
|
static const struct ide_dma_ops ali_dma_ops = {
|
|
.dma_host_set = ide_dma_host_set,
|
|
.dma_setup = ali15x3_dma_setup,
|
|
.dma_exec_cmd = ide_dma_exec_cmd,
|
|
.dma_start = ide_dma_start,
|
|
.dma_end = ide_dma_end,
|
|
.dma_test_irq = ide_dma_test_irq,
|
|
.dma_lost_irq = ide_dma_lost_irq,
|
|
.dma_timeout = ide_dma_timeout,
|
|
};
|
|
|
|
static const struct ide_port_info ali15x3_chipset __devinitdata = {
|
|
.name = DRV_NAME,
|
|
.init_chipset = init_chipset_ali15x3,
|
|
.init_hwif = init_hwif_ali15x3,
|
|
.init_dma = init_dma_ali15x3,
|
|
.port_ops = &ali_port_ops,
|
|
.pio_mask = ATA_PIO5,
|
|
.swdma_mask = ATA_SWDMA2,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
};
|
|
|
|
/**
|
|
* alim15x3_init_one - set up an ALi15x3 IDE controller
|
|
* @dev: PCI device to set up
|
|
*
|
|
* Perform the actual set up for an ALi15x3 that has been found by the
|
|
* hot plug layer.
|
|
*/
|
|
|
|
static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct ide_port_info d = ali15x3_chipset;
|
|
u8 rev = dev->revision, idx = id->driver_data;
|
|
|
|
/* don't use LBA48 DMA on ALi devices before rev 0xC5 */
|
|
if (rev <= 0xC4)
|
|
d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
|
|
|
|
if (rev >= 0x20) {
|
|
if (rev == 0x20)
|
|
d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
|
|
|
|
if (rev < 0xC2)
|
|
d.udma_mask = ATA_UDMA2;
|
|
else if (rev == 0xC2 || rev == 0xC3)
|
|
d.udma_mask = ATA_UDMA4;
|
|
else if (rev == 0xC4)
|
|
d.udma_mask = ATA_UDMA5;
|
|
else
|
|
d.udma_mask = ATA_UDMA6;
|
|
|
|
d.dma_ops = &ali_dma_ops;
|
|
} else {
|
|
d.host_flags |= IDE_HFLAG_NO_DMA;
|
|
|
|
d.mwdma_mask = d.swdma_mask = 0;
|
|
}
|
|
|
|
if (idx == 0)
|
|
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
|
|
|
|
return ide_pci_init_one(dev, &d, NULL);
|
|
}
|
|
|
|
|
|
static const struct pci_device_id alim15x3_pci_tbl[] = {
|
|
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
|
|
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
|
|
|
|
static struct pci_driver alim15x3_pci_driver = {
|
|
.name = "ALI15x3_IDE",
|
|
.id_table = alim15x3_pci_tbl,
|
|
.probe = alim15x3_init_one,
|
|
.remove = ide_pci_remove,
|
|
.suspend = ide_pci_suspend,
|
|
.resume = ide_pci_resume,
|
|
};
|
|
|
|
static int __init ali15x3_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&alim15x3_pci_driver);
|
|
}
|
|
|
|
static void __exit ali15x3_ide_exit(void)
|
|
{
|
|
return pci_unregister_driver(&alim15x3_pci_driver);
|
|
}
|
|
|
|
module_init(ali15x3_ide_init);
|
|
module_exit(ali15x3_ide_exit);
|
|
|
|
MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
|
|
MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
|
|
MODULE_LICENSE("GPL");
|
|
|