You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
89 lines
3.5 KiB
89 lines
3.5 KiB
Platform device for Host Based Touch Processing (HBTP)
|
|
|
|
hbtp_input is a kernel driver that provides functionality needed by
|
|
Host Based Touch Processing (HBTP) from the kernel. One of the
|
|
functionality is to manage the power source for touch Analog Front
|
|
End (AFE).
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "qcom,hbtp-input"
|
|
|
|
Optional properties:
|
|
|
|
- vcc_ana-supply : Analog power supply needed to power device
|
|
- qcom,afe-load : AFE/Analog supply load in uA
|
|
- qcom,afe-vtg-min : AFE/Analog minimum voltage in uV
|
|
- qcom,afe-vtg-max : AFE/Analog maximum voltage in uV
|
|
- qcom,dig-load : Digital supply load in uA
|
|
- qcom,dig-vtg-min : Digital supply minimum voltage in uV
|
|
- qcom,dig-vtg-max : Digital supply maximum voltage in uV
|
|
- qcom,display-resolution : Display resolution - maxX, maxY
|
|
- qcom,use-scale : boolean, enables the scaling for touch coordinates
|
|
- pinctrl-names : defines pinctrl names
|
|
"pmx_ts_active" : Required pinctrl name.
|
|
This should specify active config of TS RST gpio
|
|
"pmx_ts_suspend" : Required pinctrl name
|
|
This should specify suspend config of TS RST gpio
|
|
"ddic_rst_active" : Required pinctrl name
|
|
This should specify active config of DDIC RST gpio
|
|
"ddic_rst_suspend" : Required pinctrl name
|
|
This should specify suspend config of DDIC RST gpio
|
|
- pinctrl-0 : pin control to be used for TS active config
|
|
- pinctrl-1 : pin control to be used for TS suspend config
|
|
- pinctrl-2 : pin control to be used for DDIC active config
|
|
- pinctrl-3 : pin control to be used for DDIC suspend config
|
|
|
|
Optional properties if qcom,use-scale DT property is defined:
|
|
- qcom,def-maxx : default X-resolution of the touch panel.
|
|
- qcom,def-maxy : default Y-resolution of the touch panel.
|
|
(Above two properties should be defined in pairs only)
|
|
- qcom,des-maxx : desired X-resolution of the touch panel.
|
|
- qcom,des-maxy : desired Y-resolution of the touch panel.
|
|
(Above two properties should be defined in pairs only)
|
|
|
|
Optional Properties if pinctrl names are defined:
|
|
- qcom,pmx-ts-on-seq-delay-us : unsigned integer type for
|
|
delay after active TS RST gpio is changed
|
|
- qcom,fb-resume-delay-us : unsigned integer type for
|
|
delay in early resume framebuffer callback
|
|
- qcom,ddic-rst-on-seq-delay-us : array of unsigned integer type for
|
|
delay of each step in series of DDIC RST gpio control
|
|
|
|
Optional Properties if qcom,afe-vtg and qcom,dig-vtg are defined
|
|
- qcom,afe-power-on-delay-us : unsigned integer type for
|
|
delay between turning on analog and digital power supply
|
|
- qcom,afe-power-off-delay-us : unsigned integer type for
|
|
delay between turning off digital and analog power supply
|
|
|
|
Example:
|
|
&soc {
|
|
hbtp {
|
|
compatible = "qcom,hbtp-input";
|
|
vcc_ana-supply = <&pm8941_l17>;
|
|
vcc_dig-supply = <&pm8950_l16>;
|
|
qcom,afe-load = <50000>;
|
|
qcom,afe-vtg-min = <2850000>;
|
|
qcom,afe-vtg-max = <2850000>;
|
|
qcom,dig-load = <15000>;
|
|
qcom,dig-vtg-min = <1800000>;
|
|
qcom,dig-vtg-max = <1800000>;
|
|
qcom,display-resolution = <719 1279>;
|
|
qcom,use-scale;
|
|
qcom,default-max-x = <1080>;
|
|
qcom,default-max-y = <1920>;
|
|
qcom,desired-max-x = <720>;
|
|
qcom,desired-max-y = <1280>;
|
|
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
|
"ddic_rst_active", "ddic_rst_suspend";
|
|
pinctrl-0 = <&ts_rst_active>;
|
|
pinctrl-1 = <&ts_rst_suspend>;
|
|
pinctrl-2 = <&ddic_rst_active>;
|
|
pinctrl-3 = <&ddic_rst_suspend>;
|
|
qcom,pmx-ts-on-seq-delay-us = <1000>;
|
|
qcom,ddic-rst-on-seq-delay-us = <10000 10000 10000 10000>;
|
|
qcom,fb-resume-delay-us = <90000>;
|
|
qcom,afe-power-on-delay-us = <1000>;
|
|
qcom,afe-power-off-delay-us = <6>;
|
|
};
|
|
};
|
|
|