You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
774 lines
19 KiB
774 lines
19 KiB
/*
|
|
* linux/arch/arm/mach-versatile/core.c
|
|
*
|
|
* Copyright (C) 1999 - 2003 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/clcd.h>
|
|
#include <linux/amba/pl061.h>
|
|
#include <linux/amba/mmci.h>
|
|
#include <linux/amba/pl022.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/clkdev.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/leds.h>
|
|
#include <asm/hardware/arm_timer.h>
|
|
#include <asm/hardware/icst.h>
|
|
#include <asm/hardware/vic.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/platform.h>
|
|
#include <asm/hardware/timer-sp.h>
|
|
|
|
#include <plat/clcd.h>
|
|
#include <plat/fpga-irq.h>
|
|
#include <plat/sched_clock.h>
|
|
|
|
#include "core.h"
|
|
|
|
/*
|
|
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
|
|
* is the (PA >> 12).
|
|
*
|
|
* Setup a VA for the Versatile Vectored Interrupt Controller.
|
|
*/
|
|
#define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE)
|
|
#define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE)
|
|
|
|
static struct fpga_irq_data sic_irq = {
|
|
.base = VA_SIC_BASE,
|
|
.irq_start = IRQ_SIC_START,
|
|
.chip.name = "SIC",
|
|
};
|
|
|
|
#if 1
|
|
#define IRQ_MMCI0A IRQ_VICSOURCE22
|
|
#define IRQ_AACI IRQ_VICSOURCE24
|
|
#define IRQ_ETH IRQ_VICSOURCE25
|
|
#define PIC_MASK 0xFFD00000
|
|
#else
|
|
#define IRQ_MMCI0A IRQ_SIC_MMCI0A
|
|
#define IRQ_AACI IRQ_SIC_AACI
|
|
#define IRQ_ETH IRQ_SIC_ETH
|
|
#define PIC_MASK 0
|
|
#endif
|
|
|
|
void __init versatile_init_irq(void)
|
|
{
|
|
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
|
|
|
|
writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
|
|
|
|
fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);
|
|
|
|
/*
|
|
* Interrupts on secondary controller from 0 to 8 are routed to
|
|
* source 31 on PIC.
|
|
* Interrupts from 21 to 31 are routed directly to the VIC on
|
|
* the corresponding number on primary controller. This is controlled
|
|
* by setting PIC_ENABLEx.
|
|
*/
|
|
writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
|
|
}
|
|
|
|
static struct map_desc versatile_io_desc[] __initdata = {
|
|
{
|
|
.virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = IO_ADDRESS(VERSATILE_SIC_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_SIC_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = IO_ADDRESS(VERSATILE_VIC_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_VIC_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
|
|
.length = SZ_4K * 9,
|
|
.type = MT_DEVICE
|
|
},
|
|
#ifdef CONFIG_MACH_VERSATILE_AB
|
|
{
|
|
.virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
|
|
.length = SZ_64M,
|
|
.type = MT_DEVICE
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_DEBUG_LL
|
|
{
|
|
.virtual = IO_ADDRESS(VERSATILE_UART0_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_UART0_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_PCI
|
|
{
|
|
.virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
|
|
.pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = (unsigned long)VERSATILE_PCI_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(VERSATILE_PCI_BASE),
|
|
.length = VERSATILE_PCI_BASE_SIZE,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
|
|
.length = VERSATILE_PCI_CFG_BASE_SIZE,
|
|
.type = MT_DEVICE
|
|
},
|
|
#if 0
|
|
{
|
|
.virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
|
|
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
|
|
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
|
|
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE
|
|
},
|
|
#endif
|
|
#endif
|
|
};
|
|
|
|
void __init versatile_map_io(void)
|
|
{
|
|
iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
|
|
}
|
|
|
|
|
|
#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
|
|
|
|
static int versatile_flash_init(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = __raw_readl(VERSATILE_FLASHCTRL);
|
|
val &= ~VERSATILE_FLASHPROG_FLVPPEN;
|
|
__raw_writel(val, VERSATILE_FLASHCTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void versatile_flash_exit(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = __raw_readl(VERSATILE_FLASHCTRL);
|
|
val &= ~VERSATILE_FLASHPROG_FLVPPEN;
|
|
__raw_writel(val, VERSATILE_FLASHCTRL);
|
|
}
|
|
|
|
static void versatile_flash_set_vpp(int on)
|
|
{
|
|
u32 val;
|
|
|
|
val = __raw_readl(VERSATILE_FLASHCTRL);
|
|
if (on)
|
|
val |= VERSATILE_FLASHPROG_FLVPPEN;
|
|
else
|
|
val &= ~VERSATILE_FLASHPROG_FLVPPEN;
|
|
__raw_writel(val, VERSATILE_FLASHCTRL);
|
|
}
|
|
|
|
static struct flash_platform_data versatile_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 4,
|
|
.init = versatile_flash_init,
|
|
.exit = versatile_flash_exit,
|
|
.set_vpp = versatile_flash_set_vpp,
|
|
};
|
|
|
|
static struct resource versatile_flash_resource = {
|
|
.start = VERSATILE_FLASH_BASE,
|
|
.end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device versatile_flash_device = {
|
|
.name = "armflash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &versatile_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &versatile_flash_resource,
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = VERSATILE_ETH_BASE,
|
|
.end = VERSATILE_ETH_BASE + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_ETH,
|
|
.end = IRQ_ETH,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static struct resource versatile_i2c_resource = {
|
|
.start = VERSATILE_I2C_BASE,
|
|
.end = VERSATILE_I2C_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device versatile_i2c_device = {
|
|
.name = "versatile-i2c",
|
|
.id = 0,
|
|
.num_resources = 1,
|
|
.resource = &versatile_i2c_resource,
|
|
};
|
|
|
|
static struct i2c_board_info versatile_i2c_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
|
|
},
|
|
};
|
|
|
|
static int __init versatile_i2c_init(void)
|
|
{
|
|
return i2c_register_board_info(0, versatile_i2c_board_info,
|
|
ARRAY_SIZE(versatile_i2c_board_info));
|
|
}
|
|
arch_initcall(versatile_i2c_init);
|
|
|
|
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
|
|
|
|
unsigned int mmc_status(struct device *dev)
|
|
{
|
|
struct amba_device *adev = container_of(dev, struct amba_device, dev);
|
|
u32 mask;
|
|
|
|
if (adev->res.start == VERSATILE_MMCI0_BASE)
|
|
mask = 1;
|
|
else
|
|
mask = 2;
|
|
|
|
return readl(VERSATILE_SYSMCI) & mask;
|
|
}
|
|
|
|
static struct mmci_platform_data mmc0_plat_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.status = mmc_status,
|
|
.gpio_wp = -1,
|
|
.gpio_cd = -1,
|
|
};
|
|
|
|
static struct resource char_lcd_resources[] = {
|
|
{
|
|
.start = VERSATILE_CHAR_LCD_BASE,
|
|
.end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device char_lcd_device = {
|
|
.name = "arm-charlcd",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(char_lcd_resources),
|
|
.resource = char_lcd_resources,
|
|
};
|
|
|
|
/*
|
|
* Clock handling
|
|
*/
|
|
static const struct icst_params versatile_oscvco_params = {
|
|
.ref = 24000000,
|
|
.vco_max = ICST307_VCO_MAX,
|
|
.vco_min = ICST307_VCO_MIN,
|
|
.vd_min = 4 + 8,
|
|
.vd_max = 511 + 8,
|
|
.rd_min = 1 + 2,
|
|
.rd_max = 127 + 2,
|
|
.s2div = icst307_s2div,
|
|
.idx2s = icst307_idx2s,
|
|
};
|
|
|
|
static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
|
|
{
|
|
void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
|
|
u32 val;
|
|
|
|
val = readl(clk->vcoreg) & ~0x7ffff;
|
|
val |= vco.v | (vco.r << 9) | (vco.s << 16);
|
|
|
|
writel(0xa05f, sys_lock);
|
|
writel(val, clk->vcoreg);
|
|
writel(0, sys_lock);
|
|
}
|
|
|
|
static const struct clk_ops osc4_clk_ops = {
|
|
.round = icst_clk_round,
|
|
.set = icst_clk_set,
|
|
.setvco = versatile_oscvco_set,
|
|
};
|
|
|
|
static struct clk osc4_clk = {
|
|
.ops = &osc4_clk_ops,
|
|
.params = &versatile_oscvco_params,
|
|
};
|
|
|
|
/*
|
|
* These are fixed clocks.
|
|
*/
|
|
static struct clk ref24_clk = {
|
|
.rate = 24000000,
|
|
};
|
|
|
|
static struct clk dummy_apb_pclk;
|
|
|
|
static struct clk_lookup lookups[] = {
|
|
{ /* AMBA bus clock */
|
|
.con_id = "apb_pclk",
|
|
.clk = &dummy_apb_pclk,
|
|
}, { /* UART0 */
|
|
.dev_id = "dev:f1",
|
|
.clk = &ref24_clk,
|
|
}, { /* UART1 */
|
|
.dev_id = "dev:f2",
|
|
.clk = &ref24_clk,
|
|
}, { /* UART2 */
|
|
.dev_id = "dev:f3",
|
|
.clk = &ref24_clk,
|
|
}, { /* UART3 */
|
|
.dev_id = "fpga:09",
|
|
.clk = &ref24_clk,
|
|
}, { /* KMI0 */
|
|
.dev_id = "fpga:06",
|
|
.clk = &ref24_clk,
|
|
}, { /* KMI1 */
|
|
.dev_id = "fpga:07",
|
|
.clk = &ref24_clk,
|
|
}, { /* MMC0 */
|
|
.dev_id = "fpga:05",
|
|
.clk = &ref24_clk,
|
|
}, { /* MMC1 */
|
|
.dev_id = "fpga:0b",
|
|
.clk = &ref24_clk,
|
|
}, { /* SSP */
|
|
.dev_id = "dev:f4",
|
|
.clk = &ref24_clk,
|
|
}, { /* CLCD */
|
|
.dev_id = "dev:20",
|
|
.clk = &osc4_clk,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* CLCD support.
|
|
*/
|
|
#define SYS_CLCD_MODE_MASK (3 << 0)
|
|
#define SYS_CLCD_MODE_888 (0 << 0)
|
|
#define SYS_CLCD_MODE_5551 (1 << 0)
|
|
#define SYS_CLCD_MODE_565_RLSB (2 << 0)
|
|
#define SYS_CLCD_MODE_565_BLSB (3 << 0)
|
|
#define SYS_CLCD_NLCDIOON (1 << 2)
|
|
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
|
|
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
|
|
#define SYS_CLCD_ID_MASK (0x1f << 8)
|
|
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
|
|
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
|
|
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
|
|
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
|
|
#define SYS_CLCD_ID_VGA (0x1f << 8)
|
|
|
|
static bool is_sanyo_2_5_lcd;
|
|
|
|
/*
|
|
* Disable all display connectors on the interface module.
|
|
*/
|
|
static void versatile_clcd_disable(struct clcd_fb *fb)
|
|
{
|
|
void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
|
|
u32 val;
|
|
|
|
val = readl(sys_clcd);
|
|
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
|
|
writel(val, sys_clcd);
|
|
|
|
#ifdef CONFIG_MACH_VERSATILE_AB
|
|
/*
|
|
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
|
|
*/
|
|
if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
|
|
void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
|
|
unsigned long ctrl;
|
|
|
|
ctrl = readl(versatile_ib2_ctrl);
|
|
ctrl &= ~0x01;
|
|
writel(ctrl, versatile_ib2_ctrl);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Enable the relevant connector on the interface module.
|
|
*/
|
|
static void versatile_clcd_enable(struct clcd_fb *fb)
|
|
{
|
|
struct fb_var_screeninfo *var = &fb->fb.var;
|
|
void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
|
|
u32 val;
|
|
|
|
val = readl(sys_clcd);
|
|
val &= ~SYS_CLCD_MODE_MASK;
|
|
|
|
switch (var->green.length) {
|
|
case 5:
|
|
val |= SYS_CLCD_MODE_5551;
|
|
break;
|
|
case 6:
|
|
if (var->red.offset == 0)
|
|
val |= SYS_CLCD_MODE_565_RLSB;
|
|
else
|
|
val |= SYS_CLCD_MODE_565_BLSB;
|
|
break;
|
|
case 8:
|
|
val |= SYS_CLCD_MODE_888;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Set the MUX
|
|
*/
|
|
writel(val, sys_clcd);
|
|
|
|
/*
|
|
* And now enable the PSUs
|
|
*/
|
|
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
|
|
writel(val, sys_clcd);
|
|
|
|
#ifdef CONFIG_MACH_VERSATILE_AB
|
|
/*
|
|
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
|
|
*/
|
|
if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
|
|
void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
|
|
unsigned long ctrl;
|
|
|
|
ctrl = readl(versatile_ib2_ctrl);
|
|
ctrl |= 0x01;
|
|
writel(ctrl, versatile_ib2_ctrl);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Detect which LCD panel is connected, and return the appropriate
|
|
* clcd_panel structure. Note: we do not have any information on
|
|
* the required timings for the 8.4in panel, so we presently assume
|
|
* VGA timings.
|
|
*/
|
|
static int versatile_clcd_setup(struct clcd_fb *fb)
|
|
{
|
|
void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
|
|
const char *panel_name;
|
|
u32 val;
|
|
|
|
is_sanyo_2_5_lcd = false;
|
|
|
|
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
|
|
if (val == SYS_CLCD_ID_SANYO_3_8)
|
|
panel_name = "Sanyo TM38QV67A02A";
|
|
else if (val == SYS_CLCD_ID_SANYO_2_5) {
|
|
panel_name = "Sanyo QVGA Portrait";
|
|
is_sanyo_2_5_lcd = true;
|
|
} else if (val == SYS_CLCD_ID_EPSON_2_2)
|
|
panel_name = "Epson L2F50113T00";
|
|
else if (val == SYS_CLCD_ID_VGA)
|
|
panel_name = "VGA";
|
|
else {
|
|
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
|
|
val);
|
|
panel_name = "VGA";
|
|
}
|
|
|
|
fb->panel = versatile_clcd_get_panel(panel_name);
|
|
if (!fb->panel)
|
|
return -EINVAL;
|
|
|
|
return versatile_clcd_setup_dma(fb, SZ_1M);
|
|
}
|
|
|
|
static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
|
|
{
|
|
clcdfb_decode(fb, regs);
|
|
|
|
/* Always clear BGR for RGB565: we do the routing externally */
|
|
if (fb->fb.var.green.length == 6)
|
|
regs->cntl &= ~CNTL_BGR;
|
|
}
|
|
|
|
static struct clcd_board clcd_plat_data = {
|
|
.name = "Versatile",
|
|
.caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
|
|
.check = clcdfb_check,
|
|
.decode = versatile_clcd_decode,
|
|
.disable = versatile_clcd_disable,
|
|
.enable = versatile_clcd_enable,
|
|
.setup = versatile_clcd_setup,
|
|
.mmap = versatile_clcd_mmap_dma,
|
|
.remove = versatile_clcd_remove_dma,
|
|
};
|
|
|
|
static struct pl061_platform_data gpio0_plat_data = {
|
|
.gpio_base = 0,
|
|
.irq_base = IRQ_GPIO0_START,
|
|
};
|
|
|
|
static struct pl061_platform_data gpio1_plat_data = {
|
|
.gpio_base = 8,
|
|
.irq_base = IRQ_GPIO1_START,
|
|
};
|
|
|
|
static struct pl022_ssp_controller ssp0_plat_data = {
|
|
.bus_id = 0,
|
|
.enable_dma = 0,
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
|
|
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
|
|
#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
|
|
#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
|
|
|
|
/*
|
|
* These devices are connected directly to the multi-layer AHB switch
|
|
*/
|
|
#define SMC_IRQ { NO_IRQ, NO_IRQ }
|
|
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
|
|
#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
|
|
#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
|
|
|
|
/*
|
|
* These devices are connected via the core APB bridge
|
|
*/
|
|
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
|
|
#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
|
|
#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
|
|
#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
|
|
#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
|
|
|
|
/*
|
|
* These devices are connected via the DMA APB bridge
|
|
*/
|
|
#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
|
|
#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
|
|
#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
|
|
#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
|
|
#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
|
|
|
|
/* FPGA Primecells */
|
|
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
|
|
AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
|
|
AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
|
|
AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
|
|
|
|
/* DevChip Primecells */
|
|
AMBA_DEVICE(smc, "dev:00", SMC, NULL);
|
|
AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
|
|
AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
|
|
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
|
|
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
|
|
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
|
|
AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
|
|
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
|
|
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
|
|
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
|
|
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
|
|
AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
|
|
AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
|
|
AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
|
|
|
|
static struct amba_device *amba_devs[] __initdata = {
|
|
&dmac_device,
|
|
&uart0_device,
|
|
&uart1_device,
|
|
&uart2_device,
|
|
&smc_device,
|
|
&mpmc_device,
|
|
&clcd_device,
|
|
&sctl_device,
|
|
&wdog_device,
|
|
&gpio0_device,
|
|
&gpio1_device,
|
|
&rtc_device,
|
|
&sci0_device,
|
|
&ssp0_device,
|
|
&aaci_device,
|
|
&mmc0_device,
|
|
&kmi0_device,
|
|
&kmi1_device,
|
|
};
|
|
|
|
#ifdef CONFIG_LEDS
|
|
#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
|
|
|
|
static void versatile_leds_event(led_event_t ledevt)
|
|
{
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
local_irq_save(flags);
|
|
val = readl(VA_LEDS_BASE);
|
|
|
|
switch (ledevt) {
|
|
case led_idle_start:
|
|
val = val & ~VERSATILE_SYS_LED0;
|
|
break;
|
|
|
|
case led_idle_end:
|
|
val = val | VERSATILE_SYS_LED0;
|
|
break;
|
|
|
|
case led_timer:
|
|
val = val ^ VERSATILE_SYS_LED1;
|
|
break;
|
|
|
|
case led_halted:
|
|
val = 0;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writel(val, VA_LEDS_BASE);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif /* CONFIG_LEDS */
|
|
|
|
/* Early initializations */
|
|
void __init versatile_init_early(void)
|
|
{
|
|
void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
|
|
|
|
osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET;
|
|
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
|
|
|
|
versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
|
|
}
|
|
|
|
void __init versatile_init(void)
|
|
{
|
|
int i;
|
|
|
|
platform_device_register(&versatile_flash_device);
|
|
platform_device_register(&versatile_i2c_device);
|
|
platform_device_register(&smc91x_device);
|
|
platform_device_register(&char_lcd_device);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
|
|
struct amba_device *d = amba_devs[i];
|
|
amba_device_register(d, &iomem_resource);
|
|
}
|
|
|
|
#ifdef CONFIG_LEDS
|
|
leds_event = versatile_leds_event;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Where is the timer (VA)?
|
|
*/
|
|
#define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE)
|
|
#define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
|
|
#define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE)
|
|
#define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
|
|
|
|
/*
|
|
* Set up timer interrupt, and return the current time in seconds.
|
|
*/
|
|
static void __init versatile_timer_init(void)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* set clock frequency:
|
|
* VERSATILE_REFCLK is 32KHz
|
|
* VERSATILE_TIMCLK is 1MHz
|
|
*/
|
|
val = readl(__io_address(VERSATILE_SCTL_BASE));
|
|
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
|
|
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
|
|
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
|
|
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
|
|
__io_address(VERSATILE_SCTL_BASE));
|
|
|
|
/*
|
|
* Initialise to a known state (all timers off)
|
|
*/
|
|
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
|
|
|
|
sp804_clocksource_init(TIMER3_VA_BASE);
|
|
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
|
|
}
|
|
|
|
struct sys_timer versatile_timer = {
|
|
.init = versatile_timer_init,
|
|
};
|
|
|
|
|