You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
289 lines
6.7 KiB
289 lines
6.7 KiB
/* Minimal serial functions needed to send messages out the serial
|
|
* port on the MBX console.
|
|
*
|
|
* The MBX uses SMC1 for the serial port. We reset the port and use
|
|
* only the first BD that EPPC-Bug set up as a character FIFO.
|
|
*
|
|
* Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug
|
|
* use COM1 instead of SMC1 as the console port. This kinda sucks
|
|
* for the rest of the kernel, so here we force the use of SMC1 again.
|
|
*/
|
|
#include <linux/types.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/mpc8xx.h>
|
|
#include <asm/cpm1.h>
|
|
|
|
#ifdef CONFIG_MBX
|
|
#define MBX_CSR1 ((volatile u_char *)0xfa100000)
|
|
#define CSR1_COMEN (u_char)0x02
|
|
#endif
|
|
|
|
#ifdef TQM_SMC2_CONSOLE
|
|
#define PROFF_CONS PROFF_SMC2
|
|
#define CPM_CR_CH_CONS CPM_CR_CH_SMC2
|
|
#define SMC_INDEX 1
|
|
static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport);
|
|
#else
|
|
#define PROFF_CONS PROFF_SMC1
|
|
#define CPM_CR_CH_CONS CPM_CR_CH_SMC1
|
|
#define SMC_INDEX 0
|
|
#endif
|
|
|
|
static cpm8xx_t *cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
|
|
|
|
unsigned long
|
|
serial_init(int ignored, bd_t *bd)
|
|
{
|
|
volatile smc_t *sp;
|
|
volatile smc_uart_t *up;
|
|
volatile cbd_t *tbdf, *rbdf;
|
|
volatile cpm8xx_t *cp;
|
|
uint dpaddr, memaddr;
|
|
#ifndef CONFIG_MBX
|
|
uint ui;
|
|
#endif
|
|
|
|
cp = cpmp;
|
|
sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]);
|
|
up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS];
|
|
|
|
/* Disable transmitter/receiver.
|
|
*/
|
|
sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
|
|
|
#ifdef CONFIG_FADS
|
|
/* Enable SMC1/2 transceivers.
|
|
*/
|
|
*((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2);
|
|
#endif
|
|
|
|
#ifndef CONFIG_MBX
|
|
{
|
|
/* Initialize SMCx and use it for the console port.
|
|
*/
|
|
|
|
/* Enable SDMA.
|
|
*/
|
|
((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
|
|
|
|
#ifdef TQM_SMC2_CONSOLE
|
|
/* Use Port A for SMC2 instead of other functions.
|
|
*/
|
|
iopp->iop_papar |= 0x00c0;
|
|
iopp->iop_padir &= ~0x00c0;
|
|
iopp->iop_paodr &= ~0x00c0;
|
|
#else
|
|
/* Use Port B for SMCs instead of other functions.
|
|
*/
|
|
cp->cp_pbpar |= 0x00000cc0;
|
|
cp->cp_pbdir &= ~0x00000cc0;
|
|
cp->cp_pbodr &= ~0x00000cc0;
|
|
#endif
|
|
|
|
/* Allocate space for two buffer descriptors in the DP ram.
|
|
* For now, this address seems OK, but it may have to
|
|
* change with newer versions of the firmware.
|
|
*/
|
|
dpaddr = 0x0800;
|
|
|
|
/* Grab a few bytes from the top of memory for SMC FIFOs.
|
|
*/
|
|
memaddr = (bd->bi_memsize - 32) & ~15;
|
|
|
|
/* Set the physical address of the host memory buffers in
|
|
* the buffer descriptors.
|
|
*/
|
|
rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
|
|
rbdf->cbd_bufaddr = memaddr;
|
|
rbdf->cbd_sc = 0;
|
|
tbdf = rbdf + 1;
|
|
tbdf->cbd_bufaddr = memaddr+4;
|
|
tbdf->cbd_sc = 0;
|
|
|
|
/* Set up the uart parameters in the parameter ram.
|
|
*/
|
|
up->smc_rbase = dpaddr;
|
|
up->smc_tbase = dpaddr+sizeof(cbd_t);
|
|
up->smc_rfcr = SMC_EB;
|
|
up->smc_tfcr = SMC_EB;
|
|
|
|
/* Set UART mode, 8 bit, no parity, one stop.
|
|
* Enable receive and transmit.
|
|
*/
|
|
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
|
|
|
|
/* Mask all interrupts and remove anything pending.
|
|
*/
|
|
sp->smc_smcm = 0;
|
|
sp->smc_smce = 0xff;
|
|
|
|
/* Set up the baud rate generator.
|
|
* See 8xx_io/commproc.c for details.
|
|
* This wires BRG1 to SMC1 and BRG2 to SMC2;
|
|
*/
|
|
cp->cp_simode = 0x10000000;
|
|
ui = bd->bi_intfreq / 16 / bd->bi_baudrate;
|
|
#ifdef TQM_SMC2_CONSOLE
|
|
cp->cp_brgc2 =
|
|
#else
|
|
cp->cp_brgc1 =
|
|
#endif
|
|
((ui - 1) < 4096)
|
|
? (((ui - 1) << 1) | CPM_BRG_EN)
|
|
: ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16);
|
|
|
|
#else /* CONFIG_MBX */
|
|
if (*MBX_CSR1 & CSR1_COMEN) {
|
|
/* COM1 is enabled. Initialize SMC1 and use it for
|
|
* the console port.
|
|
*/
|
|
|
|
/* Enable SDMA.
|
|
*/
|
|
((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
|
|
|
|
/* Use Port B for SMCs instead of other functions.
|
|
*/
|
|
cp->cp_pbpar |= 0x00000cc0;
|
|
cp->cp_pbdir &= ~0x00000cc0;
|
|
cp->cp_pbodr &= ~0x00000cc0;
|
|
|
|
/* Allocate space for two buffer descriptors in the DP ram.
|
|
* For now, this address seems OK, but it may have to
|
|
* change with newer versions of the firmware.
|
|
*/
|
|
dpaddr = 0x0800;
|
|
|
|
/* Grab a few bytes from the top of memory. EPPC-Bug isn't
|
|
* running any more, so we can do this.
|
|
*/
|
|
memaddr = (bd->bi_memsize - 32) & ~15;
|
|
|
|
/* Set the physical address of the host memory buffers in
|
|
* the buffer descriptors.
|
|
*/
|
|
rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
|
|
rbdf->cbd_bufaddr = memaddr;
|
|
rbdf->cbd_sc = 0;
|
|
tbdf = rbdf + 1;
|
|
tbdf->cbd_bufaddr = memaddr+4;
|
|
tbdf->cbd_sc = 0;
|
|
|
|
/* Set up the uart parameters in the parameter ram.
|
|
*/
|
|
up->smc_rbase = dpaddr;
|
|
up->smc_tbase = dpaddr+sizeof(cbd_t);
|
|
up->smc_rfcr = SMC_EB;
|
|
up->smc_tfcr = SMC_EB;
|
|
|
|
/* Set UART mode, 8 bit, no parity, one stop.
|
|
* Enable receive and transmit.
|
|
*/
|
|
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
|
|
|
|
/* Mask all interrupts and remove anything pending.
|
|
*/
|
|
sp->smc_smcm = 0;
|
|
sp->smc_smce = 0xff;
|
|
|
|
/* Set up the baud rate generator.
|
|
* See 8xx_io/commproc.c for details.
|
|
*/
|
|
cp->cp_simode = 0x10000000;
|
|
cp->cp_brgc1 =
|
|
(((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN;
|
|
|
|
/* Enable SMC1 for console output.
|
|
*/
|
|
*MBX_CSR1 &= ~CSR1_COMEN;
|
|
}
|
|
else {
|
|
#endif /* ndef CONFIG_MBX */
|
|
/* SMCx is used as console port.
|
|
*/
|
|
tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase];
|
|
rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase];
|
|
|
|
/* Issue a stop transmit, and wait for it.
|
|
*/
|
|
cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS,
|
|
CPM_CR_STOP_TX) | CPM_CR_FLG;
|
|
while (cp->cp_cpcr & CPM_CR_FLG);
|
|
}
|
|
|
|
/* Make the first buffer the only buffer.
|
|
*/
|
|
tbdf->cbd_sc |= BD_SC_WRAP;
|
|
rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
|
|
|
|
/* Single character receive.
|
|
*/
|
|
up->smc_mrblr = 1;
|
|
up->smc_maxidl = 0;
|
|
|
|
/* Initialize Tx/Rx parameters.
|
|
*/
|
|
cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG;
|
|
while (cp->cp_cpcr & CPM_CR_FLG);
|
|
|
|
/* Enable transmitter/receiver.
|
|
*/
|
|
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
|
|
|
|
/* This is ignored.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
serial_putc(void *ignored, const char c)
|
|
{
|
|
volatile cbd_t *tbdf;
|
|
volatile char *buf;
|
|
volatile smc_uart_t *up;
|
|
|
|
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
|
|
tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
|
|
|
|
/* Wait for last character to go.
|
|
*/
|
|
buf = (char *)tbdf->cbd_bufaddr;
|
|
while (tbdf->cbd_sc & BD_SC_READY);
|
|
|
|
*buf = c;
|
|
tbdf->cbd_datlen = 1;
|
|
tbdf->cbd_sc |= BD_SC_READY;
|
|
}
|
|
|
|
char
|
|
serial_getc(void *ignored)
|
|
{
|
|
volatile cbd_t *rbdf;
|
|
volatile char *buf;
|
|
volatile smc_uart_t *up;
|
|
char c;
|
|
|
|
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
|
|
rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
|
|
|
|
/* Wait for character to show up.
|
|
*/
|
|
buf = (char *)rbdf->cbd_bufaddr;
|
|
while (rbdf->cbd_sc & BD_SC_EMPTY);
|
|
c = *buf;
|
|
rbdf->cbd_sc |= BD_SC_EMPTY;
|
|
|
|
return(c);
|
|
}
|
|
|
|
int
|
|
serial_tstc(void *ignored)
|
|
{
|
|
volatile cbd_t *rbdf;
|
|
volatile smc_uart_t *up;
|
|
|
|
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
|
|
rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
|
|
|
|
return(!(rbdf->cbd_sc & BD_SC_EMPTY));
|
|
}
|
|
|