You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
444 lines
17 KiB
444 lines
17 KiB
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 1999 by Ralf Baechle
|
|
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
|
|
*/
|
|
#ifndef _ASM_SERIAL_H
|
|
#define _ASM_SERIAL_H
|
|
|
|
#include <linux/config.h>
|
|
|
|
/*
|
|
* This assumes you have a 1.8432 MHz clock for your UART.
|
|
*
|
|
* It'd be nice if someone built a serial card with a 24.576 MHz
|
|
* clock, since the 16550A is capable of handling a top speed of 1.5
|
|
* megabits/second; but this requires the faster clock.
|
|
*/
|
|
#define BASE_BAUD (1843200 / 16)
|
|
|
|
/* Standard COM flags (except for COM4, because of the 8514 problem) */
|
|
#ifdef CONFIG_SERIAL_DETECT_IRQ
|
|
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
|
|
#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
|
|
#else
|
|
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
|
|
#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_MANY_PORTS
|
|
#define FOURPORT_FLAGS ASYNC_FOURPORT
|
|
#define ACCENT_FLAGS 0
|
|
#define BOCA_FLAGS 0
|
|
#define HUB6_FLAGS 0
|
|
#define RS_TABLE_SIZE 64
|
|
#else
|
|
#define RS_TABLE_SIZE
|
|
#endif
|
|
|
|
/*
|
|
* The following define the access methods for the HUB6 card. All
|
|
* access is through two ports for all 24 possible chips. The card is
|
|
* selected through the high 2 bits, the port on that card with the
|
|
* "middle" 3 bits, and the register on that port with the bottom
|
|
* 3 bits.
|
|
*
|
|
* While the access port and interrupt is configurable, the default
|
|
* port locations are 0x302 for the port control register, and 0x303
|
|
* for the data read/write register. Normally, the interrupt is at irq3
|
|
* but can be anything from 3 to 7 inclusive. Note that using 3 will
|
|
* require disabling com2.
|
|
*/
|
|
|
|
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
|
|
|
|
#ifdef CONFIG_MACH_JAZZ
|
|
#include <asm/jazz.h>
|
|
|
|
#ifndef CONFIG_OLIVETTI_M700
|
|
/* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
|
|
exactly which ones ... XXX */
|
|
#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */
|
|
#else
|
|
/* but the M700 isn't such a strange beast */
|
|
#define JAZZ_BASE_BAUD BASE_BAUD
|
|
#endif
|
|
|
|
#define _JAZZ_SERIAL_INIT(int, base) \
|
|
{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
|
|
.iomem_base = (u8 *) base, .iomem_reg_shift = 0, \
|
|
.io_type = SERIAL_IO_MEM }
|
|
#define JAZZ_SERIAL_PORT_DEFNS \
|
|
_JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE), \
|
|
_JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE),
|
|
#else
|
|
#define JAZZ_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_COBALT
|
|
#include <asm/cobalt/cobalt.h>
|
|
#define COBALT_BASE_BAUD (18432000 / 16)
|
|
#define COBALT_SERIAL_PORT_DEFNS \
|
|
/* UART CLK PORT IRQ FLAGS */ \
|
|
{ 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */
|
|
#else
|
|
#define COBALT_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
/*
|
|
* Both Galileo boards have the same UART mappings.
|
|
*/
|
|
#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
|
|
#include <asm/galileo-boards/ev96100.h>
|
|
#include <asm/galileo-boards/ev96100int.h>
|
|
#define EV96100_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
|
|
.flags = STD_COM_FLAGS, \
|
|
.iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \
|
|
.io_type = SERIAL_IO_MEM }, \
|
|
{ .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
|
|
.flags = STD_COM_FLAGS, \
|
|
.iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \
|
|
.io_type = SERIAL_IO_MEM },
|
|
#else
|
|
#define EV96100_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_ITE8172
|
|
#include <asm/it8172/it8172.h>
|
|
#include <asm/it8172/it8172_int.h>
|
|
#include <asm/it8712.h>
|
|
#define ITE_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
|
|
.irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
|
|
{ .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
|
|
.irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \
|
|
/* Smart Card Reader 0 */ \
|
|
{ .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
|
|
.irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
|
|
/* Smart Card Reader 1 */ \
|
|
{ .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
|
|
.irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
|
|
#else
|
|
#define ITE_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_IVR
|
|
#include <asm/it8172/it8172.h>
|
|
#include <asm/it8172/it8172_int.h>
|
|
#define IVR_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
|
|
.irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
|
|
/* Smart Card Reader 1 */ \
|
|
{ .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
|
|
.irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
|
|
#else
|
|
#define IVR_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_TOSHIBA_JMR3927
|
|
#include <asm/jmr3927/jmr3927.h>
|
|
#define TXX927_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \
|
|
.flags = UART0_FLAGS, .type = 1 }, \
|
|
{ .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \
|
|
.flags = UART1_FLAGS, .type = 1 },
|
|
#else
|
|
#define TXX927_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_AU1X00
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#ifdef CONFIG_SOC_AU1000
|
|
#define AU1000_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = 0, .port = UART0_ADDR, \
|
|
.iomem_base = (unsigned char *)UART0_ADDR, \
|
|
.irq = AU1000_UART0_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART1_ADDR, \
|
|
.iomem_base = (unsigned char *)UART1_ADDR, \
|
|
.irq = AU1000_UART1_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART2_ADDR, \
|
|
.iomem_base = (unsigned char *)UART2_ADDR, \
|
|
.irq = AU1000_UART2_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART3_ADDR, \
|
|
.iomem_base = (unsigned char *)UART3_ADDR, \
|
|
.irq = AU1000_UART3_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 },
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_AU1500
|
|
#define AU1000_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = 0, .port = UART0_ADDR, \
|
|
.iomem_base = (unsigned char *)UART0_ADDR, \
|
|
.irq = AU1500_UART0_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART3_ADDR, \
|
|
.iomem_base = (unsigned char *)UART3_ADDR, \
|
|
.irq = AU1500_UART3_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 },
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_AU1100
|
|
#define AU1000_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = 0, .port = UART0_ADDR, \
|
|
.iomem_base = (unsigned char *)UART0_ADDR, \
|
|
.irq = AU1100_UART0_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART1_ADDR, \
|
|
.iomem_base = (unsigned char *)UART1_ADDR, \
|
|
.irq = AU1100_UART1_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART3_ADDR, \
|
|
.iomem_base = (unsigned char *)UART3_ADDR, \
|
|
.irq = AU1100_UART3_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 },
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_AU1550
|
|
#define AU1000_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = 0, .port = UART0_ADDR, \
|
|
.iomem_base = (unsigned char *)UART0_ADDR, \
|
|
.irq = AU1550_UART0_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART1_ADDR, \
|
|
.iomem_base = (unsigned char *)UART1_ADDR, \
|
|
.irq = AU1550_UART1_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART3_ADDR, \
|
|
.iomem_base = (unsigned char *)UART3_ADDR, \
|
|
.irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS,\
|
|
.iomem_reg_shift = 2 },
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_AU1200
|
|
#define AU1000_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = 0, .port = UART0_ADDR, \
|
|
.iomem_base = (unsigned char *)UART0_ADDR, \
|
|
.irq = AU1200_UART0_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 }, \
|
|
{ .baud_base = 0, .port = UART1_ADDR, \
|
|
.iomem_base = (unsigned char *)UART1_ADDR, \
|
|
.irq = AU1200_UART1_INT, .flags = STD_COM_FLAGS, \
|
|
.iomem_reg_shift = 2 },
|
|
#endif
|
|
|
|
#else
|
|
#define AU1000_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
|
|
#define STD_SERIAL_PORT_DEFNS \
|
|
/* UART CLK PORT IRQ FLAGS */ \
|
|
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
|
|
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
|
|
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
|
|
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
|
|
|
|
#ifdef CONFIG_SERIAL_MANY_PORTS
|
|
#define EXTRA_SERIAL_PORT_DEFNS \
|
|
{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
|
|
{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
|
|
{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
|
|
{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
|
|
{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
|
|
{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
|
|
{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
|
|
{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
|
|
{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
|
|
{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
|
|
{ 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
|
|
{ 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
|
|
{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
|
|
{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
|
|
{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
|
|
{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
|
|
{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
|
|
{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
|
|
{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
|
|
{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
|
|
{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
|
|
{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
|
|
{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
|
|
{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
|
|
{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
|
|
{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
|
|
{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
|
|
{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
|
|
#else /* CONFIG_SERIAL_MANY_PORTS */
|
|
#define EXTRA_SERIAL_PORT_DEFNS
|
|
#endif /* CONFIG_SERIAL_MANY_PORTS */
|
|
|
|
#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
|
|
#define STD_SERIAL_PORT_DEFNS
|
|
#define EXTRA_SERIAL_PORT_DEFNS
|
|
#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
|
|
|
|
/* You can have up to four HUB6's in the system, but I've only
|
|
* included two cards here for a total of twelve ports.
|
|
*/
|
|
#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
|
|
#define HUB6_SERIAL_PORT_DFNS \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
|
|
#else
|
|
#define HUB6_SERIAL_PORT_DFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MOMENCO_JAGUAR_ATX
|
|
/* Ordinary NS16552 duart with a 20MHz crystal. */
|
|
#define JAGUAR_ATX_UART_CLK 20000000
|
|
#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16)
|
|
|
|
#define JAGUAR_ATX_SERIAL1_IRQ 6
|
|
#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
|
|
|
|
#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
|
|
{ baud_base: JAGUAR_ATX_BASE_BAUD, irq: int, \
|
|
flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
|
|
iomem_base: (u8 *) base, iomem_reg_shift: 2, \
|
|
io_type: SERIAL_IO_MEM }
|
|
#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
|
|
_JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
|
|
#else
|
|
#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MOMENCO_OCELOT_3
|
|
#define OCELOT_3_BASE_BAUD ( 20000000 / 16 )
|
|
#define OCELOT_3_SERIAL_IRQ 6
|
|
#define OCELOT_3_SERIAL_BASE (signed)0xfd000020
|
|
|
|
#define _OCELOT_3_SERIAL_INIT(int, base) \
|
|
{ baud_base: OCELOT_3_BASE_BAUD, irq: int, \
|
|
flags: STD_COM_FLAGS, \
|
|
iomem_base: (u8 *) base, iomem_reg_shift: 2, \
|
|
io_type: SERIAL_IO_MEM }
|
|
|
|
#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
|
|
_OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE)
|
|
#else
|
|
#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MOMENCO_OCELOT
|
|
/* Ordinary NS16552 duart with a 20MHz crystal. */
|
|
#define OCELOT_BASE_BAUD ( 20000000 / 16 )
|
|
|
|
#define OCELOT_SERIAL1_IRQ 4
|
|
#define OCELOT_SERIAL1_BASE 0xe0001020
|
|
|
|
#define _OCELOT_SERIAL_INIT(int, base) \
|
|
{ .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
|
|
.iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
|
|
.io_type = SERIAL_IO_MEM }
|
|
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
|
|
_OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE)
|
|
#else
|
|
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MOMENCO_OCELOT_G
|
|
/* Ordinary NS16552 duart with a 20MHz crystal. */
|
|
#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
|
|
|
|
#define OCELOT_G_SERIAL1_IRQ 4
|
|
#if 0
|
|
#define OCELOT_G_SERIAL1_BASE 0xe0001020
|
|
#else
|
|
#define OCELOT_G_SERIAL1_BASE 0xfd000020
|
|
#endif
|
|
|
|
#define _OCELOT_G_SERIAL_INIT(int, base) \
|
|
{ .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
|
|
.iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
|
|
.io_type = SERIAL_IO_MEM }
|
|
#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
|
|
_OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
|
|
#else
|
|
#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MOMENCO_OCELOT_C
|
|
/* Ordinary NS16552 duart with a 20MHz crystal. */
|
|
#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
|
|
|
|
#define OCELOT_C_SERIAL1_IRQ 80
|
|
#define OCELOT_C_SERIAL1_BASE 0xfd000020
|
|
|
|
#define OCELOT_C_SERIAL2_IRQ 81
|
|
#define OCELOT_C_SERIAL2_BASE 0xfd000000
|
|
|
|
#define _OCELOT_C_SERIAL_INIT(int, base) \
|
|
{ .baud_base = OCELOT_C_BASE_BAUD, \
|
|
.irq = (int), \
|
|
.flags = STD_COM_FLAGS, \
|
|
.iomem_base = (u8 *) base, \
|
|
.iomem_reg_shift = 2, \
|
|
.io_type = SERIAL_IO_MEM \
|
|
}
|
|
#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
|
|
_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \
|
|
_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE)
|
|
#else
|
|
#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_DDB5477
|
|
#include <asm/ddb5xxx/ddb5477.h>
|
|
#define DDB5477_SERIAL_PORT_DEFNS \
|
|
{ .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, \
|
|
.flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, \
|
|
.iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, \
|
|
{ .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, \
|
|
.flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, \
|
|
.iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},
|
|
#else
|
|
#define DDB5477_SERIAL_PORT_DEFNS
|
|
#endif
|
|
|
|
#ifdef CONFIG_SGI_IP32
|
|
/*
|
|
* The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory
|
|
* They are initialized in ip32_setup
|
|
*/
|
|
#define IP32_SERIAL_PORT_DEFNS \
|
|
{},{},
|
|
#else
|
|
#define IP32_SERIAL_PORT_DEFNS
|
|
#endif /* CONFIG_SGI_IP32 */
|
|
|
|
#define SERIAL_PORT_DFNS \
|
|
COBALT_SERIAL_PORT_DEFNS \
|
|
DDB5477_SERIAL_PORT_DEFNS \
|
|
EV96100_SERIAL_PORT_DEFNS \
|
|
EXTRA_SERIAL_PORT_DEFNS \
|
|
HUB6_SERIAL_PORT_DFNS \
|
|
IP32_SERIAL_PORT_DEFNS \
|
|
ITE_SERIAL_PORT_DEFNS \
|
|
IVR_SERIAL_PORT_DEFNS \
|
|
JAZZ_SERIAL_PORT_DEFNS \
|
|
STD_SERIAL_PORT_DEFNS \
|
|
MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
|
|
MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
|
|
MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
|
|
MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
|
|
TXX927_SERIAL_PORT_DEFNS \
|
|
AU1000_SERIAL_PORT_DEFNS
|
|
|
|
#endif /* _ASM_SERIAL_H */
|
|
|