You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
937 lines
23 KiB
937 lines
23 KiB
/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/wait.h>
|
|
#include "usbpd.h"
|
|
|
|
#define USB_PDPHY_MAX_DATA_OBJ_LEN 28
|
|
#define USB_PDPHY_MSG_HDR_LEN 2
|
|
|
|
/* PD PHY register offsets and bit fields */
|
|
#define USB_PDPHY_MSG_CONFIG 0x40
|
|
#define MSG_CONFIG_PORT_DATA_ROLE BIT(3)
|
|
#define MSG_CONFIG_PORT_POWER_ROLE BIT(2)
|
|
#define MSG_CONFIG_SPEC_REV_MASK (BIT(1) | BIT(0))
|
|
|
|
#define USB_PDPHY_EN_CONTROL 0x46
|
|
#define CONTROL_ENABLE BIT(0)
|
|
|
|
#define USB_PDPHY_RX_STATUS 0x4A
|
|
#define RX_FRAME_TYPE (BIT(0) | BIT(1) | BIT(2))
|
|
|
|
#define USB_PDPHY_FRAME_FILTER 0x4C
|
|
#define FRAME_FILTER_EN_HARD_RESET BIT(5)
|
|
#define FRAME_FILTER_EN_SOP BIT(0)
|
|
|
|
#define USB_PDPHY_TX_SIZE 0x42
|
|
#define TX_SIZE_MASK 0xF
|
|
|
|
#define USB_PDPHY_TX_CONTROL 0x44
|
|
#define TX_CONTROL_RETRY_COUNT(n) (((n) & 0x3) << 5)
|
|
#define TX_CONTROL_FRAME_TYPE (BIT(4) | BIT(3) | BIT(2))
|
|
#define TX_CONTROL_FRAME_TYPE_CABLE_RESET (0x1 << 2)
|
|
#define TX_CONTROL_SEND_SIGNAL BIT(1)
|
|
#define TX_CONTROL_SEND_MSG BIT(0)
|
|
|
|
#define USB_PDPHY_RX_SIZE 0x48
|
|
|
|
#define USB_PDPHY_RX_ACKNOWLEDGE 0x4B
|
|
#define RX_BUFFER_TOKEN BIT(0)
|
|
|
|
#define USB_PDPHY_BIST_MODE 0x4E
|
|
#define BIST_MODE_MASK 0xF
|
|
#define BIST_ENABLE BIT(7)
|
|
#define PD_MSG_BIST 0x3
|
|
#define PD_BIST_TEST_DATA_MODE 0x8
|
|
|
|
#define USB_PDPHY_TX_BUFFER_HDR 0x60
|
|
#define USB_PDPHY_TX_BUFFER_DATA 0x62
|
|
|
|
#define USB_PDPHY_RX_BUFFER 0x80
|
|
|
|
/* VDD regulator */
|
|
#define VDD_PDPHY_VOL_MIN 2800000 /* uV */
|
|
#define VDD_PDPHY_VOL_MAX 3300000 /* uV */
|
|
#define VDD_PDPHY_HPM_LOAD 3000 /* uA */
|
|
|
|
/* Message Spec Rev field */
|
|
#define PD_MSG_HDR_REV(hdr) (((hdr) >> 6) & 3)
|
|
|
|
/* timers */
|
|
#define RECEIVER_RESPONSE_TIME 15 /* tReceiverResponse */
|
|
#define HARD_RESET_COMPLETE_TIME 5 /* tHardResetComplete */
|
|
|
|
struct usb_pdphy {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
|
|
u16 base;
|
|
struct regulator *vdd_pdphy;
|
|
|
|
/* irqs */
|
|
int sig_tx_irq;
|
|
int sig_rx_irq;
|
|
int msg_tx_irq;
|
|
int msg_rx_irq;
|
|
int msg_tx_failed_irq;
|
|
int msg_tx_discarded_irq;
|
|
int msg_rx_discarded_irq;
|
|
bool sig_rx_wake_enabled;
|
|
bool msg_rx_wake_enabled;
|
|
|
|
void (*signal_cb)(struct usbpd *pd, enum pd_sig_type sig);
|
|
void (*msg_rx_cb)(struct usbpd *pd, enum pd_sop_type sop,
|
|
u8 *buf, size_t len);
|
|
void (*shutdown_cb)(struct usbpd *pd);
|
|
|
|
/* write waitq */
|
|
wait_queue_head_t tx_waitq;
|
|
|
|
bool is_opened;
|
|
int tx_status;
|
|
u8 frame_filter_val;
|
|
bool in_test_data_mode;
|
|
|
|
enum data_role data_role;
|
|
enum power_role power_role;
|
|
|
|
struct usbpd *usbpd;
|
|
|
|
/* debug */
|
|
struct dentry *debug_root;
|
|
unsigned int tx_bytes; /* hdr + data */
|
|
unsigned int rx_bytes; /* hdr + data */
|
|
unsigned int sig_tx_cnt;
|
|
unsigned int sig_rx_cnt;
|
|
unsigned int msg_tx_cnt;
|
|
unsigned int msg_rx_cnt;
|
|
unsigned int msg_tx_failed_cnt;
|
|
unsigned int msg_tx_discarded_cnt;
|
|
unsigned int msg_rx_discarded_cnt;
|
|
};
|
|
|
|
static struct usb_pdphy *__pdphy;
|
|
|
|
static int pdphy_dbg_status(struct seq_file *s, void *p)
|
|
{
|
|
struct usb_pdphy *pdphy = s->private;
|
|
|
|
seq_printf(s,
|
|
"PD Phy driver status\n"
|
|
"==================================================\n");
|
|
seq_printf(s, "opened: %10d\n", pdphy->is_opened);
|
|
seq_printf(s, "tx status: %10d\n", pdphy->tx_status);
|
|
seq_printf(s, "tx bytes: %10u\n", pdphy->tx_bytes);
|
|
seq_printf(s, "rx bytes: %10u\n", pdphy->rx_bytes);
|
|
seq_printf(s, "data role: %10u\n", pdphy->data_role);
|
|
seq_printf(s, "power role: %10u\n", pdphy->power_role);
|
|
seq_printf(s, "frame filter: %10u\n", pdphy->frame_filter_val);
|
|
seq_printf(s, "sig tx cnt: %10u\n", pdphy->sig_tx_cnt);
|
|
seq_printf(s, "sig rx cnt: %10u\n", pdphy->sig_rx_cnt);
|
|
seq_printf(s, "msg tx cnt: %10u\n", pdphy->msg_tx_cnt);
|
|
seq_printf(s, "msg rx cnt: %10u\n", pdphy->msg_rx_cnt);
|
|
seq_printf(s, "msg tx failed cnt: %10u\n",
|
|
pdphy->msg_tx_failed_cnt);
|
|
seq_printf(s, "msg tx discarded cnt: %10u\n",
|
|
pdphy->msg_tx_discarded_cnt);
|
|
seq_printf(s, "msg rx discarded cnt: %10u\n",
|
|
pdphy->msg_rx_discarded_cnt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdphy_dbg_status_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, pdphy_dbg_status, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations status_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = pdphy_dbg_status_open,
|
|
.llseek = seq_lseek,
|
|
.read = seq_read,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void pdphy_create_debugfs_entries(struct usb_pdphy *pdphy)
|
|
{
|
|
struct dentry *ent;
|
|
|
|
pdphy->debug_root = debugfs_create_dir("usb-pdphy", NULL);
|
|
if (!pdphy->debug_root) {
|
|
dev_warn(pdphy->dev, "Couldn't create debug dir\n");
|
|
return;
|
|
}
|
|
|
|
ent = debugfs_create_file("status", 0400, pdphy->debug_root, pdphy,
|
|
&status_ops);
|
|
if (!ent) {
|
|
dev_warn(pdphy->dev, "Couldn't create status file\n");
|
|
debugfs_remove(pdphy->debug_root);
|
|
}
|
|
}
|
|
|
|
static int pdphy_enable_power(struct usb_pdphy *pdphy, bool on)
|
|
{
|
|
int ret = 0;
|
|
|
|
dev_dbg(pdphy->dev, "%s turn %s regulator.\n", __func__,
|
|
on ? "on" : "off");
|
|
|
|
if (!on)
|
|
goto disable_pdphy_vdd;
|
|
|
|
ret = regulator_set_load(pdphy->vdd_pdphy, VDD_PDPHY_HPM_LOAD);
|
|
if (ret < 0) {
|
|
dev_err(pdphy->dev, "Unable to set HPM of vdd_pdphy:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_set_voltage(pdphy->vdd_pdphy, VDD_PDPHY_VOL_MIN,
|
|
VDD_PDPHY_VOL_MAX);
|
|
if (ret) {
|
|
dev_err(pdphy->dev,
|
|
"set voltage failed for vdd_pdphy:%d\n", ret);
|
|
goto put_pdphy_vdd_lpm;
|
|
}
|
|
|
|
ret = regulator_enable(pdphy->vdd_pdphy);
|
|
if (ret) {
|
|
dev_err(pdphy->dev, "Unable to enable vdd_pdphy:%d\n", ret);
|
|
goto unset_pdphy_vdd;
|
|
}
|
|
|
|
dev_dbg(pdphy->dev, "%s: PD PHY regulator turned ON.\n", __func__);
|
|
return ret;
|
|
|
|
disable_pdphy_vdd:
|
|
ret = regulator_disable(pdphy->vdd_pdphy);
|
|
if (ret)
|
|
dev_err(pdphy->dev, "Unable to disable vdd_pdphy:%d\n", ret);
|
|
|
|
unset_pdphy_vdd:
|
|
ret = regulator_set_voltage(pdphy->vdd_pdphy, 0, VDD_PDPHY_VOL_MAX);
|
|
if (ret)
|
|
dev_err(pdphy->dev,
|
|
"Unable to set (0) voltage for vdd_pdphy:%d\n", ret);
|
|
|
|
put_pdphy_vdd_lpm:
|
|
ret = regulator_set_load(pdphy->vdd_pdphy, 0);
|
|
if (ret < 0)
|
|
dev_err(pdphy->dev, "Unable to set (0) HPM of vdd_pdphy\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
void pdphy_enable_irq(struct usb_pdphy *pdphy, bool enable)
|
|
{
|
|
if (enable) {
|
|
enable_irq(pdphy->sig_tx_irq);
|
|
enable_irq(pdphy->sig_rx_irq);
|
|
pdphy->sig_rx_wake_enabled =
|
|
!enable_irq_wake(pdphy->sig_rx_irq);
|
|
enable_irq(pdphy->msg_tx_irq);
|
|
if (!pdphy->in_test_data_mode) {
|
|
enable_irq(pdphy->msg_rx_irq);
|
|
pdphy->msg_rx_wake_enabled =
|
|
!enable_irq_wake(pdphy->msg_rx_irq);
|
|
}
|
|
enable_irq(pdphy->msg_tx_failed_irq);
|
|
enable_irq(pdphy->msg_tx_discarded_irq);
|
|
enable_irq(pdphy->msg_rx_discarded_irq);
|
|
return;
|
|
}
|
|
|
|
disable_irq(pdphy->sig_tx_irq);
|
|
disable_irq(pdphy->sig_rx_irq);
|
|
if (pdphy->sig_rx_wake_enabled) {
|
|
disable_irq_wake(pdphy->sig_rx_irq);
|
|
pdphy->sig_rx_wake_enabled = false;
|
|
}
|
|
disable_irq(pdphy->msg_tx_irq);
|
|
if (!pdphy->in_test_data_mode)
|
|
disable_irq(pdphy->msg_rx_irq);
|
|
if (pdphy->msg_rx_wake_enabled) {
|
|
disable_irq_wake(pdphy->msg_rx_irq);
|
|
pdphy->msg_rx_wake_enabled = false;
|
|
}
|
|
disable_irq(pdphy->msg_tx_failed_irq);
|
|
disable_irq(pdphy->msg_tx_discarded_irq);
|
|
disable_irq(pdphy->msg_rx_discarded_irq);
|
|
}
|
|
|
|
static int pdphy_reg_read(struct usb_pdphy *pdphy, u8 *val, u16 addr, int count)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(pdphy->regmap, pdphy->base + addr, val, count);
|
|
if (ret) {
|
|
dev_err(pdphy->dev, "read failed: addr=0x%04x, ret=%d\n",
|
|
pdphy->base + addr, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write multiple registers to device with block of data */
|
|
static int pdphy_bulk_reg_write(struct usb_pdphy *pdphy, u16 addr,
|
|
const void *val, u8 val_cnt)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_bulk_write(pdphy->regmap, pdphy->base + addr,
|
|
val, val_cnt);
|
|
if (ret) {
|
|
dev_err(pdphy->dev, "bulk write failed: addr=0x%04x, ret=%d\n",
|
|
pdphy->base + addr, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Writes a single byte to the specified register */
|
|
static inline int pdphy_reg_write(struct usb_pdphy *pdphy, u16 addr, u8 val)
|
|
{
|
|
return pdphy_bulk_reg_write(pdphy, addr, &val, 1);
|
|
}
|
|
|
|
/* Writes to the specified register limited by the bit mask */
|
|
static int pdphy_masked_write(struct usb_pdphy *pdphy, u16 addr,
|
|
u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(pdphy->regmap, pdphy->base + addr, mask, val);
|
|
if (ret) {
|
|
dev_err(pdphy->dev, "write failed: addr=0x%04x, ret=%d\n",
|
|
pdphy->base + addr, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pd_phy_update_roles(enum data_role dr, enum power_role pr)
|
|
{
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
|
|
return pdphy_masked_write(pdphy, USB_PDPHY_MSG_CONFIG,
|
|
(MSG_CONFIG_PORT_DATA_ROLE | MSG_CONFIG_PORT_POWER_ROLE),
|
|
((dr == DR_DFP ? MSG_CONFIG_PORT_DATA_ROLE : 0) |
|
|
(pr == PR_SRC ? MSG_CONFIG_PORT_POWER_ROLE : 0)));
|
|
}
|
|
EXPORT_SYMBOL(pd_phy_update_roles);
|
|
|
|
int pd_phy_update_frame_filter(u8 frame_filter_val)
|
|
{
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
|
|
return pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER, frame_filter_val);
|
|
}
|
|
EXPORT_SYMBOL(pd_phy_update_frame_filter);
|
|
|
|
int pd_phy_open(struct pd_phy_params *params)
|
|
{
|
|
int ret;
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
|
|
if (!pdphy) {
|
|
pr_err("%s: pdphy not found\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (pdphy->is_opened) {
|
|
dev_err(pdphy->dev, "%s: already opened\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
pdphy->signal_cb = params->signal_cb;
|
|
pdphy->msg_rx_cb = params->msg_rx_cb;
|
|
pdphy->shutdown_cb = params->shutdown_cb;
|
|
pdphy->data_role = params->data_role;
|
|
pdphy->power_role = params->power_role;
|
|
pdphy->frame_filter_val = params->frame_filter_val;
|
|
|
|
dev_dbg(pdphy->dev, "%s: DR %x PR %x frame filter val %x\n", __func__,
|
|
pdphy->data_role, pdphy->power_role, pdphy->frame_filter_val);
|
|
|
|
ret = pdphy_enable_power(pdphy, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* update data and power role to be used in GoodCRC generation */
|
|
ret = pd_phy_update_roles(pdphy->data_role, pdphy->power_role);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* PD 2.0 phy */
|
|
ret = pdphy_masked_write(pdphy, USB_PDPHY_MSG_CONFIG,
|
|
MSG_CONFIG_SPEC_REV_MASK, USBPD_REV_20);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_EN_CONTROL, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_EN_CONTROL, CONTROL_ENABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* update frame filter */
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER,
|
|
pdphy->frame_filter_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* initialize Rx buffer ownership to PDPHY HW */
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_RX_ACKNOWLEDGE, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pdphy->is_opened = true;
|
|
pdphy_enable_irq(pdphy, true);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(pd_phy_open);
|
|
|
|
int pd_phy_signal(enum pd_sig_type sig)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
|
|
dev_dbg(pdphy->dev, "%s: type %d\n", __func__, sig);
|
|
|
|
if (!pdphy) {
|
|
pr_err("%s: pdphy not found\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!pdphy->is_opened) {
|
|
dev_dbg(pdphy->dev, "%s: pdphy disabled\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
pdphy->tx_status = -EINPROGRESS;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(2, 3);
|
|
|
|
val = (sig == CABLE_RESET_SIG ? TX_CONTROL_FRAME_TYPE_CABLE_RESET : 0)
|
|
| TX_CONTROL_SEND_SIGNAL;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = wait_event_interruptible_hrtimeout(pdphy->tx_waitq,
|
|
pdphy->tx_status != -EINPROGRESS,
|
|
ms_to_ktime(HARD_RESET_COMPLETE_TIME));
|
|
if (ret) {
|
|
dev_err(pdphy->dev, "%s: failed ret %d", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0);
|
|
|
|
if (pdphy->tx_status)
|
|
return pdphy->tx_status;
|
|
|
|
if (sig == HARD_RESET_SIG)
|
|
/* Frame filter is reconfigured in pd_phy_open() */
|
|
return pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER, 0);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(pd_phy_signal);
|
|
|
|
int pd_phy_write(u16 hdr, const u8 *data, size_t data_len, enum pd_sop_type sop)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
size_t total_len = data_len + USB_PDPHY_MSG_HDR_LEN;
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
unsigned int msg_rx_cnt;
|
|
|
|
dev_dbg(pdphy->dev, "%s: hdr %x frame sop_type %d\n",
|
|
__func__, hdr, sop);
|
|
|
|
if (data && data_len)
|
|
print_hex_dump_debug("tx data obj:", DUMP_PREFIX_NONE, 32, 4,
|
|
data, data_len, false);
|
|
|
|
if (!pdphy) {
|
|
pr_err("%s: pdphy not found\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
msg_rx_cnt = pdphy->msg_rx_cnt;
|
|
|
|
if (!pdphy->is_opened) {
|
|
dev_dbg(pdphy->dev, "%s: pdphy disabled\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (data_len > USB_PDPHY_MAX_DATA_OBJ_LEN) {
|
|
dev_err(pdphy->dev, "%s: invalid data object len %zu\n",
|
|
__func__, data_len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = pdphy_reg_read(pdphy, &val, USB_PDPHY_RX_ACKNOWLEDGE, 1);
|
|
if (ret || val) {
|
|
dev_err(pdphy->dev, "%s: RX message pending\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
pdphy->tx_status = -EINPROGRESS;
|
|
|
|
/* write 2 byte SOP message header */
|
|
ret = pdphy_bulk_reg_write(pdphy, USB_PDPHY_TX_BUFFER_HDR, (u8 *)&hdr,
|
|
USB_PDPHY_MSG_HDR_LEN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (data && data_len) {
|
|
/* write data objects of SOP message */
|
|
ret = pdphy_bulk_reg_write(pdphy, USB_PDPHY_TX_BUFFER_DATA,
|
|
data, data_len);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_SIZE, total_len - 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(2, 3);
|
|
|
|
val = (sop << 2) | TX_CONTROL_SEND_MSG;
|
|
|
|
/* nRetryCount == 2 for PD 3.0, 3 for PD 2.0 */
|
|
if (PD_MSG_HDR_REV(hdr) == USBPD_REV_30)
|
|
val |= TX_CONTROL_RETRY_COUNT(2);
|
|
else
|
|
val |= TX_CONTROL_RETRY_COUNT(3);
|
|
|
|
if (msg_rx_cnt != pdphy->msg_rx_cnt) {
|
|
dev_err(pdphy->dev, "%s: RX message arrived\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = wait_event_interruptible_hrtimeout(pdphy->tx_waitq,
|
|
pdphy->tx_status != -EINPROGRESS,
|
|
ms_to_ktime(RECEIVER_RESPONSE_TIME));
|
|
if (ret) {
|
|
dev_err(pdphy->dev, "%s: failed ret %d", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (hdr && !pdphy->tx_status)
|
|
pdphy->tx_bytes += data_len + USB_PDPHY_MSG_HDR_LEN;
|
|
|
|
return pdphy->tx_status ? pdphy->tx_status : 0;
|
|
}
|
|
EXPORT_SYMBOL(pd_phy_write);
|
|
|
|
void pd_phy_close(void)
|
|
{
|
|
int ret;
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
|
|
if (!pdphy) {
|
|
pr_err("%s: pdphy not found\n", __func__);
|
|
return;
|
|
}
|
|
|
|
if (!pdphy->is_opened) {
|
|
dev_err(pdphy->dev, "%s: not opened\n", __func__);
|
|
return;
|
|
}
|
|
|
|
pdphy->is_opened = false;
|
|
pdphy_enable_irq(pdphy, false);
|
|
|
|
pdphy->tx_status = -ESHUTDOWN;
|
|
|
|
wake_up_all(&pdphy->tx_waitq);
|
|
|
|
pdphy_reg_write(pdphy, USB_PDPHY_BIST_MODE, 0);
|
|
pdphy->in_test_data_mode = false;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_TX_CONTROL, 0);
|
|
if (ret)
|
|
return;
|
|
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_EN_CONTROL, 0);
|
|
if (ret)
|
|
return;
|
|
|
|
pdphy_enable_power(pdphy, false);
|
|
}
|
|
EXPORT_SYMBOL(pd_phy_close);
|
|
|
|
static irqreturn_t pdphy_msg_tx_irq(int irq, void *data)
|
|
{
|
|
struct usb_pdphy *pdphy = data;
|
|
|
|
/* TX already aborted by received signal */
|
|
if (pdphy->tx_status != -EINPROGRESS)
|
|
return IRQ_HANDLED;
|
|
|
|
if (irq == pdphy->msg_tx_irq) {
|
|
pdphy->msg_tx_cnt++;
|
|
pdphy->tx_status = 0;
|
|
} else if (irq == pdphy->msg_tx_discarded_irq) {
|
|
pdphy->msg_tx_discarded_cnt++;
|
|
pdphy->tx_status = -EBUSY;
|
|
} else if (irq == pdphy->msg_tx_failed_irq) {
|
|
pdphy->msg_tx_failed_cnt++;
|
|
pdphy->tx_status = -EFAULT;
|
|
} else {
|
|
dev_err(pdphy->dev, "spurious irq #%d received\n", irq);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
wake_up(&pdphy->tx_waitq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t pdphy_msg_rx_discarded_irq(int irq, void *data)
|
|
{
|
|
struct usb_pdphy *pdphy = data;
|
|
|
|
pdphy->msg_rx_discarded_cnt++;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t pdphy_sig_rx_irq_thread(int irq, void *data)
|
|
{
|
|
u8 rx_status, frame_type;
|
|
int ret;
|
|
struct usb_pdphy *pdphy = data;
|
|
|
|
pdphy->sig_rx_cnt++;
|
|
|
|
ret = pdphy_reg_read(pdphy, &rx_status, USB_PDPHY_RX_STATUS, 1);
|
|
if (ret)
|
|
goto done;
|
|
|
|
frame_type = rx_status & RX_FRAME_TYPE;
|
|
if (frame_type != HARD_RESET_SIG) {
|
|
dev_err(pdphy->dev, "%s:unsupported frame type %d\n",
|
|
__func__, frame_type);
|
|
goto done;
|
|
}
|
|
|
|
/* Frame filter is reconfigured in pd_phy_open() */
|
|
ret = pdphy_reg_write(pdphy, USB_PDPHY_FRAME_FILTER, 0);
|
|
|
|
if (pdphy->signal_cb)
|
|
pdphy->signal_cb(pdphy->usbpd, frame_type);
|
|
|
|
if (pdphy->tx_status == -EINPROGRESS) {
|
|
pdphy->tx_status = -EBUSY;
|
|
wake_up(&pdphy->tx_waitq);
|
|
}
|
|
done:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t pdphy_sig_tx_irq_thread(int irq, void *data)
|
|
{
|
|
struct usb_pdphy *pdphy = data;
|
|
|
|
/* in case of exit from BIST Carrier Mode 2, clear BIST_MODE */
|
|
pdphy_reg_write(pdphy, USB_PDPHY_BIST_MODE, 0);
|
|
|
|
pdphy->sig_tx_cnt++;
|
|
pdphy->tx_status = 0;
|
|
wake_up(&pdphy->tx_waitq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int pd_phy_bist_mode(u8 bist_mode)
|
|
{
|
|
struct usb_pdphy *pdphy = __pdphy;
|
|
|
|
dev_dbg(pdphy->dev, "%s: enter BIST mode %d\n", __func__, bist_mode);
|
|
|
|
pdphy_reg_write(pdphy, USB_PDPHY_BIST_MODE, 0);
|
|
|
|
udelay(5);
|
|
|
|
return pdphy_masked_write(pdphy, USB_PDPHY_BIST_MODE,
|
|
BIST_MODE_MASK | BIST_ENABLE, bist_mode | BIST_ENABLE);
|
|
}
|
|
|
|
static irqreturn_t pdphy_msg_rx_irq(int irq, void *data)
|
|
{
|
|
u8 size, rx_status, frame_type;
|
|
u8 buf[32];
|
|
int ret;
|
|
struct usb_pdphy *pdphy = data;
|
|
|
|
pdphy->msg_rx_cnt++;
|
|
|
|
ret = pdphy_reg_read(pdphy, &size, USB_PDPHY_RX_SIZE, 1);
|
|
if (ret)
|
|
goto done;
|
|
|
|
if (!size || size > 31) {
|
|
dev_err(pdphy->dev, "%s: invalid size %d\n", __func__, size);
|
|
goto done;
|
|
}
|
|
|
|
ret = pdphy_reg_read(pdphy, &rx_status, USB_PDPHY_RX_STATUS, 1);
|
|
if (ret)
|
|
goto done;
|
|
|
|
frame_type = rx_status & RX_FRAME_TYPE;
|
|
if (frame_type == SOPII_MSG) {
|
|
dev_err(pdphy->dev, "%s:unsupported frame type %d\n",
|
|
__func__, frame_type);
|
|
goto done;
|
|
}
|
|
|
|
ret = pdphy_reg_read(pdphy, buf, USB_PDPHY_RX_BUFFER, size + 1);
|
|
if (ret)
|
|
goto done;
|
|
|
|
/* ack to change ownership of rx buffer back to PDPHY RX HW */
|
|
pdphy_reg_write(pdphy, USB_PDPHY_RX_ACKNOWLEDGE, 0);
|
|
|
|
if (((buf[0] & 0xf) == PD_MSG_BIST) && !(buf[1] & 0x80) && size >= 5) {
|
|
u8 mode = buf[5] >> 4; /* [31:28] of 1st data object */
|
|
|
|
pd_phy_bist_mode(mode);
|
|
pdphy_reg_write(pdphy, USB_PDPHY_RX_ACKNOWLEDGE, 0);
|
|
|
|
if (mode == PD_BIST_TEST_DATA_MODE) {
|
|
pdphy->in_test_data_mode = true;
|
|
disable_irq_nosync(irq);
|
|
}
|
|
goto done;
|
|
}
|
|
|
|
if (pdphy->msg_rx_cb)
|
|
pdphy->msg_rx_cb(pdphy->usbpd, frame_type, buf, size + 1);
|
|
|
|
print_hex_dump_debug("rx msg:", DUMP_PREFIX_NONE, 32, 4, buf, size + 1,
|
|
false);
|
|
pdphy->rx_bytes += size + 1;
|
|
done:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int pdphy_request_irq(struct usb_pdphy *pdphy,
|
|
struct device_node *node,
|
|
int *irq_num, const char *irq_name,
|
|
irqreturn_t (irq_handler)(int irq, void *data),
|
|
irqreturn_t (thread_fn)(int irq, void *data),
|
|
int flags)
|
|
{
|
|
int ret;
|
|
|
|
*irq_num = of_irq_get_byname(node, irq_name);
|
|
if (*irq_num < 0) {
|
|
dev_err(pdphy->dev, "Unable to get %s irqn", irq_name);
|
|
ret = -ENXIO;
|
|
}
|
|
|
|
irq_set_status_flags(*irq_num, IRQ_NOAUTOEN);
|
|
ret = devm_request_threaded_irq(pdphy->dev, *irq_num, irq_handler,
|
|
thread_fn, flags, irq_name, pdphy);
|
|
if (ret < 0) {
|
|
dev_err(pdphy->dev, "Unable to request %s irq: %dn",
|
|
irq_name, ret);
|
|
ret = -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdphy_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
unsigned int base;
|
|
struct usb_pdphy *pdphy;
|
|
|
|
pdphy = devm_kzalloc(&pdev->dev, sizeof(*pdphy), GFP_KERNEL);
|
|
if (!pdphy)
|
|
return -ENOMEM;
|
|
|
|
pdphy->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!pdphy->regmap) {
|
|
dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_set_drvdata(&pdev->dev, pdphy);
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "reg", &base);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get reg base address ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
pdphy->base = base;
|
|
pdphy->dev = &pdev->dev;
|
|
|
|
init_waitqueue_head(&pdphy->tx_waitq);
|
|
|
|
pdphy->vdd_pdphy = devm_regulator_get(&pdev->dev, "vdd-pdphy");
|
|
if (IS_ERR(pdphy->vdd_pdphy)) {
|
|
dev_err(&pdev->dev, "unable to get vdd-pdphy\n");
|
|
return PTR_ERR(pdphy->vdd_pdphy);
|
|
}
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->sig_tx_irq, "sig-tx", NULL,
|
|
pdphy_sig_tx_irq_thread, (IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->sig_rx_irq, "sig-rx", NULL,
|
|
pdphy_sig_rx_irq_thread, (IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->msg_tx_irq, "msg-tx", pdphy_msg_tx_irq,
|
|
NULL, (IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->msg_rx_irq, "msg-rx", pdphy_msg_rx_irq,
|
|
NULL, (IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->msg_tx_failed_irq, "msg-tx-failed", pdphy_msg_tx_irq,
|
|
NULL, (IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->msg_tx_discarded_irq, "msg-tx-discarded",
|
|
pdphy_msg_tx_irq, NULL,
|
|
(IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pdphy_request_irq(pdphy, pdev->dev.of_node,
|
|
&pdphy->msg_rx_discarded_irq, "msg-rx-discarded",
|
|
pdphy_msg_rx_discarded_irq, NULL,
|
|
(IRQF_TRIGGER_RISING | IRQF_ONESHOT));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* usbpd_create() could call back to us, so have __pdphy ready */
|
|
__pdphy = pdphy;
|
|
|
|
pdphy->usbpd = usbpd_create(&pdev->dev);
|
|
if (IS_ERR(pdphy->usbpd)) {
|
|
dev_err(&pdev->dev, "usbpd_create failed: %ld\n",
|
|
PTR_ERR(pdphy->usbpd));
|
|
__pdphy = NULL;
|
|
return PTR_ERR(pdphy->usbpd);
|
|
}
|
|
|
|
pdphy_create_debugfs_entries(pdphy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdphy_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_pdphy *pdphy = platform_get_drvdata(pdev);
|
|
|
|
debugfs_remove_recursive(pdphy->debug_root);
|
|
usbpd_destroy(pdphy->usbpd);
|
|
|
|
if (pdphy->is_opened)
|
|
pd_phy_close();
|
|
|
|
__pdphy = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pdphy_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct usb_pdphy *pdphy = platform_get_drvdata(pdev);
|
|
|
|
/* let protocol engine shutdown the pdphy synchronously */
|
|
if (pdphy->shutdown_cb)
|
|
pdphy->shutdown_cb(pdphy->usbpd);
|
|
}
|
|
|
|
static const struct of_device_id pdphy_match_table[] = {
|
|
{
|
|
.compatible = "qcom,qpnp-pdphy",
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pdphy_match_table);
|
|
|
|
static struct platform_driver pdphy_driver = {
|
|
.driver = {
|
|
.name = "qpnp-pdphy",
|
|
.of_match_table = pdphy_match_table,
|
|
},
|
|
.probe = pdphy_probe,
|
|
.remove = pdphy_remove,
|
|
.shutdown = pdphy_shutdown,
|
|
};
|
|
|
|
module_platform_driver(pdphy_driver);
|
|
|
|
MODULE_DESCRIPTION("QPNP PD PHY Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:qpnp-pdphy");
|
|
|