You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
515 lines
16 KiB
515 lines
16 KiB
/*
|
|
* drivers/platform/x86/mlxcpld-hotplug.c
|
|
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
|
|
* Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the names of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_data/mlxcpld-hotplug.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
/* Offset of event and mask registers from status register */
|
|
#define MLXCPLD_HOTPLUG_EVENT_OFF 1
|
|
#define MLXCPLD_HOTPLUG_MASK_OFF 2
|
|
#define MLXCPLD_HOTPLUG_AGGR_MASK_OFF 1
|
|
|
|
#define MLXCPLD_HOTPLUG_ATTRS_NUM 8
|
|
|
|
/**
|
|
* enum mlxcpld_hotplug_attr_type - sysfs attributes for hotplug events:
|
|
* @MLXCPLD_HOTPLUG_ATTR_TYPE_PSU: power supply unit attribute;
|
|
* @MLXCPLD_HOTPLUG_ATTR_TYPE_PWR: power cable attribute;
|
|
* @MLXCPLD_HOTPLUG_ATTR_TYPE_FAN: FAN drawer attribute;
|
|
*/
|
|
enum mlxcpld_hotplug_attr_type {
|
|
MLXCPLD_HOTPLUG_ATTR_TYPE_PSU,
|
|
MLXCPLD_HOTPLUG_ATTR_TYPE_PWR,
|
|
MLXCPLD_HOTPLUG_ATTR_TYPE_FAN,
|
|
};
|
|
|
|
/**
|
|
* struct mlxcpld_hotplug_priv_data - platform private data:
|
|
* @irq: platform interrupt number;
|
|
* @pdev: platform device;
|
|
* @plat: platform data;
|
|
* @hwmon: hwmon device;
|
|
* @mlxcpld_hotplug_attr: sysfs attributes array;
|
|
* @mlxcpld_hotplug_dev_attr: sysfs sensor device attribute array;
|
|
* @group: sysfs attribute group;
|
|
* @groups: list of sysfs attribute group for hwmon registration;
|
|
* @dwork: delayed work template;
|
|
* @lock: spin lock;
|
|
* @aggr_cache: last value of aggregation register status;
|
|
* @psu_cache: last value of PSU register status;
|
|
* @pwr_cache: last value of power register status;
|
|
* @fan_cache: last value of FAN register status;
|
|
*/
|
|
struct mlxcpld_hotplug_priv_data {
|
|
int irq;
|
|
struct platform_device *pdev;
|
|
struct mlxcpld_hotplug_platform_data *plat;
|
|
struct device *hwmon;
|
|
struct attribute *mlxcpld_hotplug_attr[MLXCPLD_HOTPLUG_ATTRS_NUM + 1];
|
|
struct sensor_device_attribute_2
|
|
mlxcpld_hotplug_dev_attr[MLXCPLD_HOTPLUG_ATTRS_NUM];
|
|
struct attribute_group group;
|
|
const struct attribute_group *groups[2];
|
|
struct delayed_work dwork;
|
|
spinlock_t lock;
|
|
u8 aggr_cache;
|
|
u8 psu_cache;
|
|
u8 pwr_cache;
|
|
u8 fan_cache;
|
|
};
|
|
|
|
static ssize_t mlxcpld_hotplug_attr_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev);
|
|
int index = to_sensor_dev_attr_2(attr)->index;
|
|
int nr = to_sensor_dev_attr_2(attr)->nr;
|
|
u8 reg_val = 0;
|
|
|
|
switch (nr) {
|
|
case MLXCPLD_HOTPLUG_ATTR_TYPE_PSU:
|
|
/* Bit = 0 : PSU is present. */
|
|
reg_val = !!!(inb(priv->plat->psu_reg_offset) & BIT(index));
|
|
break;
|
|
|
|
case MLXCPLD_HOTPLUG_ATTR_TYPE_PWR:
|
|
/* Bit = 1 : power cable is attached. */
|
|
reg_val = !!(inb(priv->plat->pwr_reg_offset) & BIT(index %
|
|
priv->plat->pwr_count));
|
|
break;
|
|
|
|
case MLXCPLD_HOTPLUG_ATTR_TYPE_FAN:
|
|
/* Bit = 0 : FAN is present. */
|
|
reg_val = !!!(inb(priv->plat->fan_reg_offset) & BIT(index %
|
|
priv->plat->fan_count));
|
|
break;
|
|
}
|
|
|
|
return sprintf(buf, "%u\n", reg_val);
|
|
}
|
|
|
|
#define PRIV_ATTR(i) priv->mlxcpld_hotplug_attr[i]
|
|
#define PRIV_DEV_ATTR(i) priv->mlxcpld_hotplug_dev_attr[i]
|
|
static int mlxcpld_hotplug_attr_init(struct mlxcpld_hotplug_priv_data *priv)
|
|
{
|
|
int num_attrs = priv->plat->psu_count + priv->plat->pwr_count +
|
|
priv->plat->fan_count;
|
|
int i;
|
|
|
|
priv->group.attrs = devm_kzalloc(&priv->pdev->dev, num_attrs *
|
|
sizeof(struct attribute *),
|
|
GFP_KERNEL);
|
|
if (!priv->group.attrs)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_attrs; i++) {
|
|
PRIV_ATTR(i) = &PRIV_DEV_ATTR(i).dev_attr.attr;
|
|
|
|
if (i < priv->plat->psu_count) {
|
|
PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
|
|
GFP_KERNEL, "psu%u", i + 1);
|
|
PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PSU;
|
|
} else if (i < priv->plat->psu_count + priv->plat->pwr_count) {
|
|
PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
|
|
GFP_KERNEL, "pwr%u", i %
|
|
priv->plat->pwr_count + 1);
|
|
PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PWR;
|
|
} else {
|
|
PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
|
|
GFP_KERNEL, "fan%u", i %
|
|
priv->plat->fan_count + 1);
|
|
PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_FAN;
|
|
}
|
|
|
|
if (!PRIV_ATTR(i)->name) {
|
|
dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n",
|
|
i + 1);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
PRIV_DEV_ATTR(i).dev_attr.attr.name = PRIV_ATTR(i)->name;
|
|
PRIV_DEV_ATTR(i).dev_attr.attr.mode = S_IRUGO;
|
|
PRIV_DEV_ATTR(i).dev_attr.show = mlxcpld_hotplug_attr_show;
|
|
PRIV_DEV_ATTR(i).index = i;
|
|
sysfs_attr_init(&PRIV_DEV_ATTR(i).dev_attr.attr);
|
|
}
|
|
|
|
priv->group.attrs = priv->mlxcpld_hotplug_attr;
|
|
priv->groups[0] = &priv->group;
|
|
priv->groups[1] = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxcpld_hotplug_device_create(struct device *dev,
|
|
struct mlxcpld_hotplug_device *item)
|
|
{
|
|
item->adapter = i2c_get_adapter(item->bus);
|
|
if (!item->adapter) {
|
|
dev_err(dev, "Failed to get adapter for bus %d\n",
|
|
item->bus);
|
|
return -EFAULT;
|
|
}
|
|
|
|
item->client = i2c_new_device(item->adapter, &item->brdinfo);
|
|
if (!item->client) {
|
|
dev_err(dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
|
|
item->brdinfo.type, item->bus, item->brdinfo.addr);
|
|
i2c_put_adapter(item->adapter);
|
|
item->adapter = NULL;
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mlxcpld_hotplug_device_destroy(struct mlxcpld_hotplug_device *item)
|
|
{
|
|
if (item->client) {
|
|
i2c_unregister_device(item->client);
|
|
item->client = NULL;
|
|
}
|
|
|
|
if (item->adapter) {
|
|
i2c_put_adapter(item->adapter);
|
|
item->adapter = NULL;
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
mlxcpld_hotplug_work_helper(struct device *dev,
|
|
struct mlxcpld_hotplug_device *item, u8 is_inverse,
|
|
u16 offset, u8 mask, u8 *cache)
|
|
{
|
|
u8 val, asserted;
|
|
int bit;
|
|
|
|
/* Mask event. */
|
|
outb(0, offset + MLXCPLD_HOTPLUG_MASK_OFF);
|
|
/* Read status. */
|
|
val = inb(offset) & mask;
|
|
asserted = *cache ^ val;
|
|
*cache = val;
|
|
|
|
/*
|
|
* Validate if item related to received signal type is valid.
|
|
* It should never happen, excepted the situation when some
|
|
* piece of hardware is broken. In such situation just produce
|
|
* error message and return. Caller must continue to handle the
|
|
* signals from other devices if any.
|
|
*/
|
|
if (unlikely(!item)) {
|
|
dev_err(dev, "False signal is received: register at offset 0x%02x, mask 0x%02x.\n",
|
|
offset, mask);
|
|
return;
|
|
}
|
|
|
|
for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
|
|
if (val & BIT(bit)) {
|
|
if (is_inverse)
|
|
mlxcpld_hotplug_device_destroy(item + bit);
|
|
else
|
|
mlxcpld_hotplug_device_create(dev, item + bit);
|
|
} else {
|
|
if (is_inverse)
|
|
mlxcpld_hotplug_device_create(dev, item + bit);
|
|
else
|
|
mlxcpld_hotplug_device_destroy(item + bit);
|
|
}
|
|
}
|
|
|
|
/* Acknowledge event. */
|
|
outb(0, offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
/* Unmask event. */
|
|
outb(mask, offset + MLXCPLD_HOTPLUG_MASK_OFF);
|
|
}
|
|
|
|
/*
|
|
* mlxcpld_hotplug_work_handler - performs traversing of CPLD interrupt
|
|
* registers according to the below hierarchy schema:
|
|
*
|
|
* Aggregation registers (status/mask)
|
|
* PSU registers: *---*
|
|
* *-----------------* | |
|
|
* |status/event/mask|----->| * |
|
|
* *-----------------* | |
|
|
* Power registers: | |
|
|
* *-----------------* | |
|
|
* |status/event/mask|----->| * |---> CPU
|
|
* *-----------------* | |
|
|
* FAN registers:
|
|
* *-----------------* | |
|
|
* |status/event/mask|----->| * |
|
|
* *-----------------* | |
|
|
* *---*
|
|
* In case some system changed are detected: FAN in/out, PSU in/out, power
|
|
* cable attached/detached, relevant device is created or destroyed.
|
|
*/
|
|
static void mlxcpld_hotplug_work_handler(struct work_struct *work)
|
|
{
|
|
struct mlxcpld_hotplug_priv_data *priv = container_of(work,
|
|
struct mlxcpld_hotplug_priv_data, dwork.work);
|
|
u8 val, aggr_asserted;
|
|
unsigned long flags;
|
|
|
|
/* Mask aggregation event. */
|
|
outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
|
|
/* Read aggregation status. */
|
|
val = inb(priv->plat->top_aggr_offset) & priv->plat->top_aggr_mask;
|
|
aggr_asserted = priv->aggr_cache ^ val;
|
|
priv->aggr_cache = val;
|
|
|
|
/* Handle PSU configuration changes. */
|
|
if (aggr_asserted & priv->plat->top_aggr_psu_mask)
|
|
mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->psu,
|
|
1, priv->plat->psu_reg_offset,
|
|
priv->plat->psu_mask,
|
|
&priv->psu_cache);
|
|
|
|
/* Handle power cable configuration changes. */
|
|
if (aggr_asserted & priv->plat->top_aggr_pwr_mask)
|
|
mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->pwr,
|
|
0, priv->plat->pwr_reg_offset,
|
|
priv->plat->pwr_mask,
|
|
&priv->pwr_cache);
|
|
|
|
/* Handle FAN configuration changes. */
|
|
if (aggr_asserted & priv->plat->top_aggr_fan_mask)
|
|
mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->fan,
|
|
1, priv->plat->fan_reg_offset,
|
|
priv->plat->fan_mask,
|
|
&priv->fan_cache);
|
|
|
|
if (aggr_asserted) {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/*
|
|
* It is possible, that some signals have been inserted, while
|
|
* interrupt has been masked by mlxcpld_hotplug_work_handler.
|
|
* In this case such signals will be missed. In order to handle
|
|
* these signals delayed work is canceled and work task
|
|
* re-scheduled for immediate execution. It allows to handle
|
|
* missed signals, if any. In other case work handler just
|
|
* validates that no new signals have been received during
|
|
* masking.
|
|
*/
|
|
cancel_delayed_work(&priv->dwork);
|
|
schedule_delayed_work(&priv->dwork, 0);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Unmask aggregation event (no need acknowledge). */
|
|
outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
|
|
MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
|
|
}
|
|
|
|
static void mlxcpld_hotplug_set_irq(struct mlxcpld_hotplug_priv_data *priv)
|
|
{
|
|
/* Clear psu presense event. */
|
|
outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
/* Set psu initial status as mask and unmask psu event. */
|
|
priv->psu_cache = priv->plat->psu_mask;
|
|
outb(priv->plat->psu_mask, priv->plat->psu_reg_offset +
|
|
MLXCPLD_HOTPLUG_MASK_OFF);
|
|
|
|
/* Clear power cable event. */
|
|
outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
/* Keep power initial status as zero and unmask power event. */
|
|
outb(priv->plat->pwr_mask, priv->plat->pwr_reg_offset +
|
|
MLXCPLD_HOTPLUG_MASK_OFF);
|
|
|
|
/* Clear fan presense event. */
|
|
outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
/* Set fan initial status as mask and unmask fan event. */
|
|
priv->fan_cache = priv->plat->fan_mask;
|
|
outb(priv->plat->fan_mask, priv->plat->fan_reg_offset +
|
|
MLXCPLD_HOTPLUG_MASK_OFF);
|
|
|
|
/* Keep aggregation initial status as zero and unmask events. */
|
|
outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
|
|
MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
|
|
|
|
/* Invoke work handler for initializing hot plug devices setting. */
|
|
mlxcpld_hotplug_work_handler(&priv->dwork.work);
|
|
|
|
enable_irq(priv->irq);
|
|
}
|
|
|
|
static void mlxcpld_hotplug_unset_irq(struct mlxcpld_hotplug_priv_data *priv)
|
|
{
|
|
int i;
|
|
|
|
disable_irq(priv->irq);
|
|
cancel_delayed_work_sync(&priv->dwork);
|
|
|
|
/* Mask aggregation event. */
|
|
outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
|
|
|
|
/* Mask psu presense event. */
|
|
outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
|
|
/* Clear psu presense event. */
|
|
outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
|
|
/* Mask power cable event. */
|
|
outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
|
|
/* Clear power cable event. */
|
|
outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
|
|
/* Mask fan presense event. */
|
|
outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
|
|
/* Clear fan presense event. */
|
|
outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
|
|
|
|
/* Remove all the attached devices. */
|
|
for (i = 0; i < priv->plat->psu_count; i++)
|
|
mlxcpld_hotplug_device_destroy(priv->plat->psu + i);
|
|
|
|
for (i = 0; i < priv->plat->pwr_count; i++)
|
|
mlxcpld_hotplug_device_destroy(priv->plat->pwr + i);
|
|
|
|
for (i = 0; i < priv->plat->fan_count; i++)
|
|
mlxcpld_hotplug_device_destroy(priv->plat->fan + i);
|
|
}
|
|
|
|
static irqreturn_t mlxcpld_hotplug_irq_handler(int irq, void *dev)
|
|
{
|
|
struct mlxcpld_hotplug_priv_data *priv =
|
|
(struct mlxcpld_hotplug_priv_data *)dev;
|
|
|
|
/* Schedule work task for immediate execution.*/
|
|
schedule_delayed_work(&priv->dwork, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mlxcpld_hotplug_probe(struct platform_device *pdev)
|
|
{
|
|
struct mlxcpld_hotplug_platform_data *pdata;
|
|
struct mlxcpld_hotplug_priv_data *priv;
|
|
int err;
|
|
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "Failed to get platform data.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->pdev = pdev;
|
|
priv->plat = pdata;
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (priv->irq < 0) {
|
|
dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
|
|
priv->irq);
|
|
return priv->irq;
|
|
}
|
|
|
|
err = devm_request_irq(&pdev->dev, priv->irq,
|
|
mlxcpld_hotplug_irq_handler, 0, pdev->name,
|
|
priv);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to request irq: %d\n", err);
|
|
return err;
|
|
}
|
|
disable_irq(priv->irq);
|
|
|
|
INIT_DELAYED_WORK(&priv->dwork, mlxcpld_hotplug_work_handler);
|
|
spin_lock_init(&priv->lock);
|
|
|
|
err = mlxcpld_hotplug_attr_init(priv);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
|
|
"mlxcpld_hotplug", priv, priv->groups);
|
|
if (IS_ERR(priv->hwmon)) {
|
|
dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
|
|
PTR_ERR(priv->hwmon));
|
|
return PTR_ERR(priv->hwmon);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
/* Perform initial interrupts setup. */
|
|
mlxcpld_hotplug_set_irq(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxcpld_hotplug_remove(struct platform_device *pdev)
|
|
{
|
|
struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev);
|
|
|
|
/* Clean interrupts setup. */
|
|
mlxcpld_hotplug_unset_irq(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mlxcpld_hotplug_driver = {
|
|
.driver = {
|
|
.name = "mlxcpld-hotplug",
|
|
},
|
|
.probe = mlxcpld_hotplug_probe,
|
|
.remove = mlxcpld_hotplug_remove,
|
|
};
|
|
|
|
module_platform_driver(mlxcpld_hotplug_driver);
|
|
|
|
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
|
|
MODULE_DESCRIPTION("Mellanox CPLD hotplug platform driver");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_ALIAS("platform:mlxcpld-hotplug");
|
|
|