You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
322 lines
7.6 KiB
322 lines
7.6 KiB
/*
|
|
* Linear Technology LTC4306 and LTC4305 I2C multiplexer/switch
|
|
*
|
|
* Copyright (C) 2017 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*
|
|
* Based on: i2c-mux-pca954x.c
|
|
*
|
|
* Datasheet: http://cds.linear.com/docs/en/datasheet/4306.pdf
|
|
*/
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/i2c-mux.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define LTC4305_MAX_NCHANS 2
|
|
#define LTC4306_MAX_NCHANS 4
|
|
|
|
#define LTC_REG_STATUS 0x0
|
|
#define LTC_REG_CONFIG 0x1
|
|
#define LTC_REG_MODE 0x2
|
|
#define LTC_REG_SWITCH 0x3
|
|
|
|
#define LTC_DOWNSTREAM_ACCL_EN BIT(6)
|
|
#define LTC_UPSTREAM_ACCL_EN BIT(7)
|
|
|
|
#define LTC_GPIO_ALL_INPUT 0xC0
|
|
#define LTC_SWITCH_MASK 0xF0
|
|
|
|
enum ltc_type {
|
|
ltc_4305,
|
|
ltc_4306,
|
|
};
|
|
|
|
struct chip_desc {
|
|
u8 nchans;
|
|
u8 num_gpios;
|
|
};
|
|
|
|
struct ltc4306 {
|
|
struct regmap *regmap;
|
|
struct gpio_chip gpiochip;
|
|
const struct chip_desc *chip;
|
|
};
|
|
|
|
static const struct chip_desc chips[] = {
|
|
[ltc_4305] = {
|
|
.nchans = LTC4305_MAX_NCHANS,
|
|
},
|
|
[ltc_4306] = {
|
|
.nchans = LTC4306_MAX_NCHANS,
|
|
.num_gpios = 2,
|
|
},
|
|
};
|
|
|
|
static bool ltc4306_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (reg == LTC_REG_CONFIG) ? true : false;
|
|
}
|
|
|
|
static const struct regmap_config ltc4306_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = LTC_REG_SWITCH,
|
|
.volatile_reg = ltc4306_is_volatile_reg,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static int ltc4306_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct ltc4306 *data = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, LTC_REG_CONFIG, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return !!(val & BIT(1 - offset));
|
|
}
|
|
|
|
static void ltc4306_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct ltc4306 *data = gpiochip_get_data(chip);
|
|
|
|
regmap_update_bits(data->regmap, LTC_REG_CONFIG, BIT(5 - offset),
|
|
value ? BIT(5 - offset) : 0);
|
|
}
|
|
|
|
static int ltc4306_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct ltc4306 *data = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, LTC_REG_MODE, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return !!(val & BIT(7 - offset));
|
|
}
|
|
|
|
static int ltc4306_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct ltc4306 *data = gpiochip_get_data(chip);
|
|
|
|
return regmap_update_bits(data->regmap, LTC_REG_MODE,
|
|
BIT(7 - offset), BIT(7 - offset));
|
|
}
|
|
|
|
static int ltc4306_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
struct ltc4306 *data = gpiochip_get_data(chip);
|
|
|
|
ltc4306_gpio_set(chip, offset, value);
|
|
return regmap_update_bits(data->regmap, LTC_REG_MODE,
|
|
BIT(7 - offset), 0);
|
|
}
|
|
|
|
static int ltc4306_gpio_set_config(struct gpio_chip *chip,
|
|
unsigned int offset, unsigned long config)
|
|
{
|
|
struct ltc4306 *data = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
|
|
switch (pinconf_to_config_param(config)) {
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
val = 0;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_PUSH_PULL:
|
|
val = BIT(4 - offset);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return regmap_update_bits(data->regmap, LTC_REG_MODE,
|
|
BIT(4 - offset), val);
|
|
}
|
|
|
|
static int ltc4306_gpio_init(struct ltc4306 *data)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
|
|
if (!data->chip->num_gpios)
|
|
return 0;
|
|
|
|
data->gpiochip.label = dev_name(dev);
|
|
data->gpiochip.base = -1;
|
|
data->gpiochip.ngpio = data->chip->num_gpios;
|
|
data->gpiochip.parent = dev;
|
|
data->gpiochip.can_sleep = true;
|
|
data->gpiochip.get_direction = ltc4306_gpio_get_direction;
|
|
data->gpiochip.direction_input = ltc4306_gpio_direction_input;
|
|
data->gpiochip.direction_output = ltc4306_gpio_direction_output;
|
|
data->gpiochip.get = ltc4306_gpio_get;
|
|
data->gpiochip.set = ltc4306_gpio_set;
|
|
data->gpiochip.set_config = ltc4306_gpio_set_config;
|
|
data->gpiochip.owner = THIS_MODULE;
|
|
|
|
/* gpiolib assumes all GPIOs default input */
|
|
regmap_write(data->regmap, LTC_REG_MODE, LTC_GPIO_ALL_INPUT);
|
|
|
|
return devm_gpiochip_add_data(dev, &data->gpiochip, data);
|
|
}
|
|
|
|
static int ltc4306_select_mux(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct ltc4306 *data = i2c_mux_priv(muxc);
|
|
|
|
return regmap_update_bits(data->regmap, LTC_REG_SWITCH,
|
|
LTC_SWITCH_MASK, BIT(7 - chan));
|
|
}
|
|
|
|
static int ltc4306_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct ltc4306 *data = i2c_mux_priv(muxc);
|
|
|
|
return regmap_update_bits(data->regmap, LTC_REG_SWITCH,
|
|
LTC_SWITCH_MASK, 0);
|
|
}
|
|
|
|
static const struct i2c_device_id ltc4306_id[] = {
|
|
{ "ltc4305", ltc_4305 },
|
|
{ "ltc4306", ltc_4306 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ltc4306_id);
|
|
|
|
static const struct of_device_id ltc4306_of_match[] = {
|
|
{ .compatible = "lltc,ltc4305", .data = &chips[ltc_4305] },
|
|
{ .compatible = "lltc,ltc4306", .data = &chips[ltc_4306] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltc4306_of_match);
|
|
|
|
static int ltc4306_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
|
|
const struct chip_desc *chip;
|
|
struct i2c_mux_core *muxc;
|
|
struct ltc4306 *data;
|
|
struct gpio_desc *gpio;
|
|
bool idle_disc;
|
|
unsigned int val = 0;
|
|
int num, ret;
|
|
|
|
chip = of_device_get_match_data(&client->dev);
|
|
|
|
if (!chip)
|
|
chip = &chips[id->driver_data];
|
|
|
|
idle_disc = device_property_read_bool(&client->dev,
|
|
"i2c-mux-idle-disconnect");
|
|
|
|
muxc = i2c_mux_alloc(adap, &client->dev,
|
|
chip->nchans, sizeof(*data),
|
|
I2C_MUX_LOCKED, ltc4306_select_mux,
|
|
idle_disc ? ltc4306_deselect_mux : NULL);
|
|
if (!muxc)
|
|
return -ENOMEM;
|
|
data = i2c_mux_priv(muxc);
|
|
data->chip = chip;
|
|
|
|
i2c_set_clientdata(client, muxc);
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, <c4306_regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
ret = PTR_ERR(data->regmap);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Reset and enable the mux if an enable GPIO is specified. */
|
|
gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(gpio))
|
|
return PTR_ERR(gpio);
|
|
|
|
if (gpio) {
|
|
udelay(1);
|
|
gpiod_set_value(gpio, 1);
|
|
}
|
|
|
|
/*
|
|
* Write the mux register at addr to verify
|
|
* that the mux is in fact present. This also
|
|
* initializes the mux to disconnected state.
|
|
*/
|
|
if (regmap_write(data->regmap, LTC_REG_SWITCH, 0) < 0) {
|
|
dev_warn(&client->dev, "probe failed\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (device_property_read_bool(&client->dev,
|
|
"ltc,downstream-accelerators-enable"))
|
|
val |= LTC_DOWNSTREAM_ACCL_EN;
|
|
|
|
if (device_property_read_bool(&client->dev,
|
|
"ltc,upstream-accelerators-enable"))
|
|
val |= LTC_UPSTREAM_ACCL_EN;
|
|
|
|
if (regmap_write(data->regmap, LTC_REG_CONFIG, val) < 0)
|
|
return -ENODEV;
|
|
|
|
ret = ltc4306_gpio_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Now create an adapter for each channel */
|
|
for (num = 0; num < chip->nchans; num++) {
|
|
ret = i2c_mux_add_adapter(muxc, 0, num, 0);
|
|
if (ret) {
|
|
i2c_mux_del_adapters(muxc);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"registered %d multiplexed busses for I2C switch %s\n",
|
|
num, client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltc4306_remove(struct i2c_client *client)
|
|
{
|
|
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
|
|
|
|
i2c_mux_del_adapters(muxc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver ltc4306_driver = {
|
|
.driver = {
|
|
.name = "ltc4306",
|
|
.of_match_table = of_match_ptr(ltc4306_of_match),
|
|
},
|
|
.probe = ltc4306_probe,
|
|
.remove = ltc4306_remove,
|
|
.id_table = ltc4306_id,
|
|
};
|
|
|
|
module_i2c_driver(ltc4306_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Linear Technology LTC4306, LTC4305 I2C mux/switch driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
|