You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2326 lines
52 KiB
2326 lines
52 KiB
/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "%s: " fmt, __func__
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/component.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/hdmi.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
|
|
#define CFG_HPD_INTERRUPTS BIT(0)
|
|
#define CFG_EDID_INTERRUPTS BIT(1)
|
|
#define CFG_CEC_INTERRUPTS BIT(2)
|
|
#define CFG_VID_CHK_INTERRUPTS BIT(3)
|
|
|
|
#define EDID_SEG_SIZE 256
|
|
#define READ_BUF_MAX_SIZE 9
|
|
#define WRITE_BUF_MAX_SIZE 2
|
|
#define HPD_UEVENT_BUFFER_SIZE 30
|
|
|
|
struct lt9611_reg_cfg {
|
|
u8 reg;
|
|
u8 val;
|
|
int sleep_in_ms;
|
|
};
|
|
|
|
struct lt9611_vreg {
|
|
struct regulator *vreg; /* vreg handle */
|
|
char vreg_name[32];
|
|
int min_voltage;
|
|
int max_voltage;
|
|
int enable_load;
|
|
int disable_load;
|
|
int pre_on_sleep;
|
|
int post_on_sleep;
|
|
int pre_off_sleep;
|
|
int post_off_sleep;
|
|
};
|
|
|
|
struct lt9611_video_cfg {
|
|
u32 h_active;
|
|
u32 h_front_porch;
|
|
u32 h_pulse_width;
|
|
u32 h_back_porch;
|
|
bool h_polarity;
|
|
u32 v_active;
|
|
u32 v_front_porch;
|
|
u32 v_pulse_width;
|
|
u32 v_back_porch;
|
|
bool v_polarity;
|
|
u32 pclk_khz;
|
|
bool interlaced;
|
|
u32 vic;
|
|
enum hdmi_picture_aspect ar;
|
|
u32 num_of_lanes;
|
|
u32 num_of_intfs;
|
|
u8 scaninfo;
|
|
};
|
|
|
|
struct lt9611 {
|
|
struct device *dev;
|
|
struct drm_bridge bridge;
|
|
|
|
struct device_node *host_node;
|
|
struct mipi_dsi_device *dsi;
|
|
struct drm_connector connector;
|
|
|
|
u8 i2c_addr;
|
|
int irq;
|
|
bool ac_mode;
|
|
|
|
u32 irq_gpio;
|
|
u32 reset_gpio;
|
|
u32 hdmi_ps_gpio;
|
|
u32 hdmi_en_gpio;
|
|
|
|
unsigned int num_vreg;
|
|
struct lt9611_vreg *vreg_config;
|
|
|
|
struct i2c_client *i2c_client;
|
|
|
|
enum drm_connector_status status;
|
|
bool power_on;
|
|
bool regulator_on;
|
|
|
|
/* get display modes from device tree */
|
|
bool non_pluggable;
|
|
u32 num_of_modes;
|
|
struct list_head mode_list;
|
|
|
|
struct drm_display_mode curr_mode;
|
|
struct lt9611_video_cfg video_cfg;
|
|
|
|
struct workqueue_struct *wq;
|
|
struct work_struct work;
|
|
|
|
u8 edid_buf[EDID_SEG_SIZE];
|
|
u8 i2c_wbuf[WRITE_BUF_MAX_SIZE];
|
|
u8 i2c_rbuf[READ_BUF_MAX_SIZE];
|
|
bool hdmi_mode;
|
|
};
|
|
|
|
static struct lt9611_reg_cfg lt9611_init_setup[] = {
|
|
/* LT9611_System_Init */
|
|
{0xFF, 0x81, 0},
|
|
{0x01, 0x18, 0}, /* sel xtal clock */
|
|
|
|
/* timer for frequency meter */
|
|
{0xff, 0x82, 0},
|
|
{0x1b, 0x69, 0}, /*timer 2*/
|
|
{0x1c, 0x78, 0},
|
|
{0xcb, 0x69, 0}, /*timer 1 */
|
|
{0xcc, 0x78, 0},
|
|
|
|
/* irq init */
|
|
{0xff, 0x82, 0},
|
|
{0x51, 0x01, 0},
|
|
{0x58, 0x0a, 0}, /* hpd irq */
|
|
{0x59, 0x80, 0}, /* hpd debounce width */
|
|
{0x9e, 0xf7, 0}, /* video check irq */
|
|
|
|
/* power consumption for work */
|
|
{0xff, 0x80, 0},
|
|
{0x04, 0xf0, 0},
|
|
{0x06, 0xf0, 0},
|
|
{0x0a, 0x80, 0},
|
|
{0x0b, 0x40, 0},
|
|
{0x0d, 0xef, 0},
|
|
{0x11, 0xfa, 0},
|
|
};
|
|
|
|
struct lt9611_timing_info {
|
|
u16 xres;
|
|
u16 yres;
|
|
u8 bpp;
|
|
u8 fps;
|
|
u8 lanes;
|
|
u8 intfs;
|
|
};
|
|
|
|
static struct lt9611_timing_info lt9611_supp_timing_cfg[] = {
|
|
{3840, 2160, 24, 30, 4, 2}, /* 3840x2160 24bit 30Hz 4Lane 2ports */
|
|
{1920, 1080, 24, 60, 4, 1}, /* 1080P 24bit 60Hz 4lane 1port */
|
|
{1920, 1080, 24, 30, 3, 1}, /* 1080P 24bit 30Hz 3lane 1port */
|
|
{1920, 1080, 24, 24, 3, 1},
|
|
{720, 480, 24, 60, 2, 1},
|
|
{720, 576, 24, 50, 2, 1},
|
|
{640, 480, 24, 60, 2, 1},
|
|
{0xffff, 0xffff, 0xff, 0xff, 0xff},
|
|
};
|
|
|
|
static void lt9611_hpd_work(struct work_struct *work)
|
|
{
|
|
struct drm_device *dev = NULL;
|
|
char name[HPD_UEVENT_BUFFER_SIZE], status[HPD_UEVENT_BUFFER_SIZE];
|
|
char *envp[5];
|
|
struct lt9611 *pdata = container_of(work, struct lt9611, work);
|
|
|
|
if (!pdata)
|
|
return;
|
|
|
|
dev = pdata->connector.dev;
|
|
pdata->connector.status =
|
|
pdata->connector.funcs->detect(&pdata->connector, true);
|
|
|
|
scnprintf(name, HPD_UEVENT_BUFFER_SIZE, "name=%s",
|
|
pdata->connector.name);
|
|
scnprintf(status, HPD_UEVENT_BUFFER_SIZE, "status=%s",
|
|
drm_get_connector_status_name(pdata->connector.status));
|
|
|
|
pr_debug("[%s]:[%s]\n", name, status);
|
|
envp[0] = name;
|
|
envp[1] = status;
|
|
envp[2] = NULL;
|
|
envp[3] = NULL;
|
|
envp[4] = NULL;
|
|
kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
|
|
envp);
|
|
}
|
|
|
|
static void lt9611_device_power_ctl(struct lt9611 *pdata, bool on_off);
|
|
|
|
static struct lt9611 *bridge_to_lt9611(struct drm_bridge *bridge)
|
|
{
|
|
return container_of(bridge, struct lt9611, bridge);
|
|
}
|
|
|
|
static struct lt9611 *connector_to_lt9611(struct drm_connector *connector)
|
|
{
|
|
return container_of(connector, struct lt9611, connector);
|
|
}
|
|
|
|
static int lt9611_write(struct lt9611 *pdata, u8 reg, u8 val)
|
|
{
|
|
struct i2c_client *client = pdata->i2c_client;
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = pdata->i2c_wbuf,
|
|
};
|
|
|
|
pdata->i2c_wbuf[0] = reg;
|
|
pdata->i2c_wbuf[1] = val;
|
|
|
|
if (i2c_transfer(client->adapter, &msg, 1) < 1) {
|
|
pr_err("i2c write failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611_read(struct lt9611 *pdata, u8 reg, char *buf, u32 size)
|
|
{
|
|
struct i2c_client *client = pdata->i2c_client;
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = pdata->i2c_wbuf,
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = size,
|
|
.buf = pdata->i2c_rbuf,
|
|
}
|
|
};
|
|
|
|
pdata->i2c_wbuf[0] = reg;
|
|
|
|
if (i2c_transfer(client->adapter, msg, 2) != 2) {
|
|
pr_err("i2c read failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
memcpy(buf, pdata->i2c_rbuf, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611_write_array(struct lt9611 *pdata,
|
|
struct lt9611_reg_cfg *cfg, int size)
|
|
{
|
|
int ret = 0;
|
|
int i;
|
|
|
|
size = size / sizeof(struct lt9611_reg_cfg);
|
|
for (i = 0; i < size; i++) {
|
|
ret = lt9611_write(pdata, cfg[i].reg, cfg[i].val);
|
|
|
|
if (ret != 0) {
|
|
pr_err("reg writes failed. Last write %02X to %02X\n",
|
|
cfg[i].val, cfg[i].reg);
|
|
goto w_regs_fail;
|
|
}
|
|
|
|
if (cfg[i].sleep_in_ms)
|
|
msleep(cfg[i].sleep_in_ms);
|
|
}
|
|
|
|
w_regs_fail:
|
|
if (ret != 0)
|
|
pr_err("exiting with ret = %d after %d writes\n", ret, i);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_parse_dt_modes(struct device_node *np,
|
|
struct list_head *head,
|
|
u32 *num_of_modes)
|
|
{
|
|
int rc = 0;
|
|
struct drm_display_mode *mode;
|
|
u32 mode_count = 0;
|
|
struct device_node *node = NULL;
|
|
struct device_node *root_node = NULL;
|
|
u32 h_front_porch, h_pulse_width, h_back_porch;
|
|
u32 v_front_porch, v_pulse_width, v_back_porch;
|
|
bool h_active_high, v_active_high;
|
|
u32 flags = 0;
|
|
|
|
root_node = of_get_child_by_name(np, "lt,customize-modes");
|
|
if (!root_node) {
|
|
root_node = of_parse_phandle(np, "lt,customize-modes", 0);
|
|
if (!root_node) {
|
|
pr_info("No entry present for lt,customize-modes");
|
|
goto end;
|
|
}
|
|
}
|
|
|
|
for_each_child_of_node(root_node, node) {
|
|
rc = 0;
|
|
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
|
|
if (!mode) {
|
|
pr_err("Out of memory\n");
|
|
rc = -ENOMEM;
|
|
continue;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-h-active",
|
|
&mode->hdisplay);
|
|
if (rc) {
|
|
pr_err("failed to read h-active, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-h-front-porch",
|
|
&h_front_porch);
|
|
if (rc) {
|
|
pr_err("failed to read h-front-porch, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-h-pulse-width",
|
|
&h_pulse_width);
|
|
if (rc) {
|
|
pr_err("failed to read h-pulse-width, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-h-back-porch",
|
|
&h_back_porch);
|
|
if (rc) {
|
|
pr_err("failed to read h-back-porch, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
h_active_high = of_property_read_bool(node,
|
|
"lt,mode-h-active-high");
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-v-active",
|
|
&mode->vdisplay);
|
|
if (rc) {
|
|
pr_err("failed to read v-active, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-v-front-porch",
|
|
&v_front_porch);
|
|
if (rc) {
|
|
pr_err("failed to read v-front-porch, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-v-pulse-width",
|
|
&v_pulse_width);
|
|
if (rc) {
|
|
pr_err("failed to read v-pulse-width, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-v-back-porch",
|
|
&v_back_porch);
|
|
if (rc) {
|
|
pr_err("failed to read v-back-porch, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
v_active_high = of_property_read_bool(node,
|
|
"lt,mode-v-active-high");
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-refresh-rate",
|
|
&mode->vrefresh);
|
|
if (rc) {
|
|
pr_err("failed to read refresh-rate, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "lt,mode-clock-in-khz",
|
|
&mode->clock);
|
|
if (rc) {
|
|
pr_err("failed to read clock, rc=%d\n", rc);
|
|
goto fail;
|
|
}
|
|
|
|
mode->hsync_start = mode->hdisplay + h_front_porch;
|
|
mode->hsync_end = mode->hsync_start + h_pulse_width;
|
|
mode->htotal = mode->hsync_end + h_back_porch;
|
|
mode->vsync_start = mode->vdisplay + v_front_porch;
|
|
mode->vsync_end = mode->vsync_start + v_pulse_width;
|
|
mode->vtotal = mode->vsync_end + v_back_porch;
|
|
if (h_active_high)
|
|
flags |= DRM_MODE_FLAG_PHSYNC;
|
|
else
|
|
flags |= DRM_MODE_FLAG_NHSYNC;
|
|
if (v_active_high)
|
|
flags |= DRM_MODE_FLAG_PVSYNC;
|
|
else
|
|
flags |= DRM_MODE_FLAG_NVSYNC;
|
|
mode->flags = flags;
|
|
|
|
if (!rc) {
|
|
mode_count++;
|
|
list_add_tail(&mode->head, head);
|
|
}
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
pr_debug("mode[%s] h[%d,%d,%d,%d] v[%d,%d,%d,%d] %d %x %dkHZ\n",
|
|
mode->name, mode->hdisplay, mode->hsync_start,
|
|
mode->hsync_end, mode->htotal, mode->vdisplay,
|
|
mode->vsync_start, mode->vsync_end, mode->vtotal,
|
|
mode->vrefresh, mode->flags, mode->clock);
|
|
fail:
|
|
if (rc) {
|
|
kfree(mode);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (num_of_modes)
|
|
*num_of_modes = mode_count;
|
|
|
|
end:
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int lt9611_parse_dt(struct device *dev,
|
|
struct lt9611 *pdata)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
struct device_node *end_node;
|
|
int ret = 0;
|
|
|
|
end_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
|
|
if (!end_node) {
|
|
pr_err("remote endpoint not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pdata->host_node = of_graph_get_remote_port_parent(end_node);
|
|
of_node_put(end_node);
|
|
if (!pdata->host_node) {
|
|
pr_err("remote node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
of_node_put(pdata->host_node);
|
|
|
|
pdata->irq_gpio =
|
|
of_get_named_gpio(np, "lt,irq-gpio", 0);
|
|
if (!gpio_is_valid(pdata->irq_gpio)) {
|
|
pr_err("irq gpio not specified\n");
|
|
ret = -EINVAL;
|
|
}
|
|
pr_debug("irq_gpio=%d\n", pdata->irq_gpio);
|
|
|
|
pdata->reset_gpio =
|
|
of_get_named_gpio(np, "lt,reset-gpio", 0);
|
|
if (!gpio_is_valid(pdata->reset_gpio)) {
|
|
pr_err("reset gpio not specified\n");
|
|
ret = -EINVAL;
|
|
}
|
|
pr_debug("reset_gpio=%d\n", pdata->reset_gpio);
|
|
|
|
pdata->hdmi_ps_gpio =
|
|
of_get_named_gpio(np, "lt,hdmi-ps-gpio", 0);
|
|
if (!gpio_is_valid(pdata->hdmi_ps_gpio))
|
|
pr_debug("hdmi ps gpio not specified\n");
|
|
else
|
|
pr_debug("hdmi_ps_gpio=%d\n", pdata->hdmi_ps_gpio);
|
|
|
|
pdata->hdmi_en_gpio =
|
|
of_get_named_gpio(np, "lt,hdmi-en-gpio", 0);
|
|
if (!gpio_is_valid(pdata->hdmi_en_gpio))
|
|
pr_debug("hdmi en gpio not specified\n");
|
|
else
|
|
pr_debug("hdmi_en_gpio=%d\n", pdata->hdmi_en_gpio);
|
|
|
|
pdata->ac_mode = of_property_read_bool(np, "lt,ac-mode");
|
|
pr_debug("ac_mode=%d\n", pdata->ac_mode);
|
|
|
|
pdata->non_pluggable = of_property_read_bool(np, "lt,non-pluggable");
|
|
pr_debug("non_pluggable = %d\n", pdata->non_pluggable);
|
|
if (pdata->non_pluggable) {
|
|
INIT_LIST_HEAD(&pdata->mode_list);
|
|
ret = lt9611_parse_dt_modes(np,
|
|
&pdata->mode_list, &pdata->num_of_modes);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_gpio_configure(struct lt9611 *pdata, bool on)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (on) {
|
|
ret = gpio_request(pdata->reset_gpio,
|
|
"lt9611-reset-gpio");
|
|
if (ret) {
|
|
pr_err("lt9611 reset gpio request failed\n");
|
|
goto error;
|
|
}
|
|
|
|
ret = gpio_direction_output(pdata->reset_gpio, 0);
|
|
if (ret) {
|
|
pr_err("lt9611 reset gpio direction failed\n");
|
|
goto reset_error;
|
|
}
|
|
|
|
if (gpio_is_valid(pdata->hdmi_en_gpio)) {
|
|
ret = gpio_request(pdata->hdmi_en_gpio,
|
|
"lt9611-hdmi-en-gpio");
|
|
if (ret) {
|
|
pr_err("lt9611 hdmi en gpio request failed\n");
|
|
goto reset_error;
|
|
}
|
|
|
|
ret = gpio_direction_output(pdata->hdmi_en_gpio, 1);
|
|
if (ret) {
|
|
pr_err("lt9611 hdmi en gpio direction failed\n");
|
|
goto hdmi_en_error;
|
|
}
|
|
}
|
|
|
|
if (gpio_is_valid(pdata->hdmi_ps_gpio)) {
|
|
ret = gpio_request(pdata->hdmi_ps_gpio,
|
|
"lt9611-hdmi-ps-gpio");
|
|
if (ret) {
|
|
pr_err("lt9611 hdmi ps gpio request failed\n");
|
|
goto hdmi_en_error;
|
|
}
|
|
|
|
ret = gpio_direction_input(pdata->hdmi_ps_gpio);
|
|
if (ret) {
|
|
pr_err("lt9611 hdmi ps gpio direction failed\n");
|
|
goto hdmi_ps_error;
|
|
}
|
|
}
|
|
|
|
ret = gpio_request(pdata->irq_gpio, "lt9611-irq-gpio");
|
|
if (ret) {
|
|
pr_err("lt9611 irq gpio request failed\n");
|
|
goto hdmi_ps_error;
|
|
}
|
|
|
|
ret = gpio_direction_input(pdata->irq_gpio);
|
|
if (ret) {
|
|
pr_err("lt9611 irq gpio direction failed\n");
|
|
goto irq_error;
|
|
}
|
|
} else {
|
|
gpio_free(pdata->irq_gpio);
|
|
if (gpio_is_valid(pdata->hdmi_ps_gpio))
|
|
gpio_free(pdata->hdmi_ps_gpio);
|
|
if (gpio_is_valid(pdata->hdmi_en_gpio))
|
|
gpio_free(pdata->hdmi_en_gpio);
|
|
gpio_free(pdata->reset_gpio);
|
|
}
|
|
|
|
return ret;
|
|
|
|
|
|
irq_error:
|
|
gpio_free(pdata->irq_gpio);
|
|
hdmi_ps_error:
|
|
if (gpio_is_valid(pdata->hdmi_ps_gpio))
|
|
gpio_free(pdata->hdmi_ps_gpio);
|
|
hdmi_en_error:
|
|
if (gpio_is_valid(pdata->hdmi_en_gpio))
|
|
gpio_free(pdata->hdmi_en_gpio);
|
|
reset_error:
|
|
gpio_free(pdata->reset_gpio);
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_read_device_rev(struct lt9611 *pdata)
|
|
{
|
|
u8 rev = 0;
|
|
int ret = 0;
|
|
|
|
lt9611_write(pdata, 0xff, 0x80);
|
|
lt9611_write(pdata, 0xee, 0x01);
|
|
|
|
ret = lt9611_read(pdata, 0x02, &rev, 1);
|
|
|
|
if (ret == 0)
|
|
pr_info("LT9611 revision: 0x%x\n", rev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_mipi_input_analog(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
struct lt9611_reg_cfg reg_cfg[] = {
|
|
{0xff, 0x81, 0},
|
|
{0x06, 0x40, 0}, /*port A rx current*/
|
|
{0x0a, 0xfe, 0}, /*port A ldo voltage set*/
|
|
{0x0b, 0xbf, 0}, /*enable port A lprx*/
|
|
{0x11, 0x40, 0}, /*port B rx current*/
|
|
{0x15, 0xfe, 0}, /*port B ldo voltage set*/
|
|
{0x16, 0xbf, 0}, /*enable port B lprx*/
|
|
|
|
{0x1c, 0x03, 0}, /*PortA clk lane no-LP mode*/
|
|
{0x20, 0x03, 0}, /*PortB clk lane with-LP mode*/
|
|
};
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt9611_write_array(pdata, reg_cfg, sizeof(reg_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611_mipi_input_digital(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
u8 lanes = 0;
|
|
u8 ports = 0;
|
|
struct lt9611_reg_cfg reg_cfg[] = {
|
|
{0xff, 0x82, 0},
|
|
{0x4f, 0x80, 0},
|
|
{0x50, 0x10, 0},
|
|
{0xff, 0x83, 0},
|
|
|
|
{0x02, 0x0a, 0},
|
|
{0x06, 0x0a, 0},
|
|
};
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lanes = cfg->num_of_lanes;
|
|
ports = cfg->num_of_intfs;
|
|
|
|
lt9611_write(pdata, 0xff, 0x83);
|
|
if (lanes == 4)
|
|
lt9611_write(pdata, 0x00, 0x00);
|
|
else if (lanes < 4)
|
|
lt9611_write(pdata, 0x00, lanes);
|
|
else {
|
|
pr_err("invalid lane count\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ports == 1)
|
|
lt9611_write(pdata, 0x0a, 0x00);
|
|
else if (ports == 2)
|
|
lt9611_write(pdata, 0x0a, 0x03);
|
|
else {
|
|
pr_err("invalid port count\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt9611_write_array(pdata, reg_cfg, sizeof(reg_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lt9611_mipi_video_setup(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
u32 h_total, h_act, hpw, hfp, hss;
|
|
u32 v_total, v_act, vpw, vfp, vss;
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return;
|
|
}
|
|
|
|
h_total = cfg->h_active + cfg->h_front_porch +
|
|
cfg->h_pulse_width + cfg->h_back_porch;
|
|
v_total = cfg->v_active + cfg->v_front_porch +
|
|
cfg->v_pulse_width + cfg->v_back_porch;
|
|
|
|
h_act = cfg->h_active;
|
|
hpw = cfg->h_pulse_width;
|
|
hfp = cfg->h_front_porch;
|
|
hss = cfg->h_pulse_width + cfg->h_back_porch;
|
|
|
|
v_act = cfg->v_active;
|
|
vpw = cfg->v_pulse_width;
|
|
vfp = cfg->v_front_porch;
|
|
vss = cfg->v_pulse_width + cfg->v_back_porch;
|
|
|
|
pr_debug("h_total=%d, h_active=%d, hfp=%d, hpw=%d, hbp=%d\n",
|
|
h_total, cfg->h_active, cfg->h_front_porch,
|
|
cfg->h_pulse_width, cfg->h_back_porch);
|
|
|
|
pr_debug("v_total=%d, v_active=%d, vfp=%d, vpw=%d, vbp=%d\n",
|
|
v_total, cfg->v_active, cfg->v_front_porch,
|
|
cfg->v_pulse_width, cfg->v_back_porch);
|
|
|
|
lt9611_write(pdata, 0xff, 0x83);
|
|
|
|
lt9611_write(pdata, 0x0d, (u8)(v_total / 256));
|
|
lt9611_write(pdata, 0x0e, (u8)(v_total % 256));
|
|
|
|
lt9611_write(pdata, 0x0f, (u8)(v_act / 256));
|
|
lt9611_write(pdata, 0x10, (u8)(v_act % 256));
|
|
|
|
lt9611_write(pdata, 0x11, (u8)(h_total / 256));
|
|
lt9611_write(pdata, 0x12, (u8)(h_total % 256));
|
|
|
|
lt9611_write(pdata, 0x13, (u8)(h_act / 256));
|
|
lt9611_write(pdata, 0x14, (u8)(h_act % 256));
|
|
|
|
lt9611_write(pdata, 0x15, (u8)(vpw % 256));
|
|
lt9611_write(pdata, 0x16, (u8)(hpw % 256));
|
|
|
|
lt9611_write(pdata, 0x17, (u8)(vfp % 256));
|
|
|
|
lt9611_write(pdata, 0x18, (u8)(vss % 256));
|
|
|
|
lt9611_write(pdata, 0x19, (u8)(hfp % 256));
|
|
|
|
lt9611_write(pdata, 0x1a, (u8)(hss / 256));
|
|
lt9611_write(pdata, 0x1b, (u8)(hss % 256));
|
|
}
|
|
|
|
static int lt9611_pcr_setup(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
u32 h_act = 0;
|
|
struct lt9611_reg_cfg reg_cfg[] = {
|
|
{0xff, 0x83, 0},
|
|
{0x0b, 0x01, 0},
|
|
{0x0c, 0x10, 0},
|
|
{0x48, 0x00, 0},
|
|
{0x49, 0x81, 0},
|
|
|
|
/* stage 1 */
|
|
{0x21, 0x4a, 0},
|
|
{0x24, 0x71, 0},
|
|
{0x25, 0x30, 0},
|
|
{0x2a, 0x01, 0},
|
|
|
|
/* stage 2 */
|
|
{0x4a, 0x40, 0},
|
|
{0x1d, 0x10, 0},
|
|
|
|
/* MK limit */
|
|
{0x2d, 0x38, 0},
|
|
{0x31, 0x08, 0},
|
|
};
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt9611_write_array(pdata, reg_cfg, sizeof(reg_cfg));
|
|
|
|
h_act = cfg->h_active;
|
|
|
|
if (h_act == 1920) {
|
|
lt9611_write(pdata, 0x26, 0x37);
|
|
} else if (h_act == 3840) {
|
|
lt9611_write(pdata, 0x0b, 0x03);
|
|
lt9611_write(pdata, 0x0c, 0xd0);
|
|
lt9611_write(pdata, 0x48, 0x03);
|
|
lt9611_write(pdata, 0x49, 0xe0);
|
|
lt9611_write(pdata, 0x24, 0x72);
|
|
lt9611_write(pdata, 0x25, 0x00);
|
|
lt9611_write(pdata, 0x2a, 0x01);
|
|
lt9611_write(pdata, 0x4a, 0x10);
|
|
lt9611_write(pdata, 0x1d, 0x10);
|
|
lt9611_write(pdata, 0x26, 0x37);
|
|
} else if (h_act == 640) {
|
|
lt9611_write(pdata, 0x26, 0x14);
|
|
}
|
|
|
|
/* pcr rst */
|
|
lt9611_write(pdata, 0xff, 0x80);
|
|
lt9611_write(pdata, 0x11, 0x5a);
|
|
lt9611_write(pdata, 0x11, 0xfa);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611_pll_setup(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
u32 pclk = 0;
|
|
struct lt9611_reg_cfg reg_cfg[] = {
|
|
/* txpll init */
|
|
{0xff, 0x81, 0},
|
|
{0x23, 0x40, 0},
|
|
{0x24, 0x64, 0},
|
|
{0x25, 0x80, 0},
|
|
{0x26, 0x55, 0},
|
|
{0x2c, 0x37, 0},
|
|
{0x2f, 0x01, 0},
|
|
{0x26, 0x55, 0},
|
|
{0x27, 0x66, 0},
|
|
{0x28, 0x88, 0},
|
|
};
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pclk = cfg->pclk_khz;
|
|
|
|
lt9611_write_array(pdata, reg_cfg, sizeof(reg_cfg));
|
|
|
|
if (pclk > 150000)
|
|
lt9611_write(pdata, 0x2d, 0x88);
|
|
else if (pclk > 70000)
|
|
lt9611_write(pdata, 0x2d, 0x99);
|
|
else
|
|
lt9611_write(pdata, 0x2d, 0xaa);
|
|
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
pclk = pclk / 2;
|
|
lt9611_write(pdata, 0xe3, pclk/65536); /* pclk[19:16] */
|
|
pclk = pclk % 65536;
|
|
lt9611_write(pdata, 0xe4, pclk/256); /* pclk[15:8] */
|
|
lt9611_write(pdata, 0xe5, pclk%256); /* pclk[7:0] */
|
|
|
|
lt9611_write(pdata, 0xde, 0x20);
|
|
lt9611_write(pdata, 0xde, 0xe0);
|
|
|
|
lt9611_write(pdata, 0xff, 0x80);
|
|
lt9611_write(pdata, 0x16, 0xf1);
|
|
lt9611_write(pdata, 0x16, 0xf3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611_video_check(struct lt9611 *pdata)
|
|
{
|
|
int ret = 0;
|
|
u32 v_total, v_act, h_act_a, h_act_b, h_total_sysclk;
|
|
u8 temp = 0;
|
|
|
|
if (!pdata) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* top module video check */
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
|
|
/* v_act */
|
|
ret = lt9611_read(pdata, 0x82, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
|
|
v_act = temp << 8;
|
|
ret = lt9611_read(pdata, 0x83, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
v_act = v_act + temp;
|
|
|
|
/* v_total */
|
|
ret = lt9611_read(pdata, 0x6c, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
v_total = temp << 8;
|
|
ret = lt9611_read(pdata, 0x6d, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
v_total = v_total + temp;
|
|
|
|
/* h_total_sysclk */
|
|
ret = lt9611_read(pdata, 0x86, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
h_total_sysclk = temp << 8;
|
|
ret = lt9611_read(pdata, 0x87, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
h_total_sysclk = h_total_sysclk + temp;
|
|
|
|
/* h_act_a */
|
|
lt9611_write(pdata, 0xff, 0x83);
|
|
ret = lt9611_read(pdata, 0x82, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
h_act_a = temp << 8;
|
|
ret = lt9611_read(pdata, 0x83, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
h_act_a = (h_act_a + temp)/3;
|
|
|
|
/* h_act_b */
|
|
lt9611_write(pdata, 0xff, 0x83);
|
|
ret = lt9611_read(pdata, 0x86, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
h_act_b = temp << 8;
|
|
ret = lt9611_read(pdata, 0x87, &temp, 1);
|
|
if (ret)
|
|
goto end;
|
|
h_act_b = (h_act_b + temp)/3;
|
|
|
|
pr_info("video check: h_act_a=%d, h_act_b=%d, v_act=%d, v_total=%d, h_total_sysclk=%d\n",
|
|
h_act_a, h_act_b, v_act, v_total, h_total_sysclk);
|
|
|
|
return 0;
|
|
|
|
end:
|
|
pr_err("read video check error\n");
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_hdmi_tx_digital(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
int ret = -EINVAL;
|
|
u32 checksum, vic;
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return ret;
|
|
}
|
|
|
|
vic = cfg->vic;
|
|
checksum = 0x46 - vic;
|
|
|
|
lt9611_write(pdata, 0xff, 0x84);
|
|
lt9611_write(pdata, 0x43, checksum);
|
|
lt9611_write(pdata, 0x44, 0x84);
|
|
lt9611_write(pdata, 0x47, vic);
|
|
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_write(pdata, 0xd6, 0x8c);
|
|
lt9611_write(pdata, 0xd7, 0x04);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_hdmi_tx_phy(struct lt9611 *pdata,
|
|
struct lt9611_video_cfg *cfg)
|
|
{
|
|
int ret = -EINVAL;
|
|
struct lt9611_reg_cfg reg_cfg[] = {
|
|
{0xff, 0x81, 0},
|
|
{0x30, 0x6a, 0},
|
|
{0x31, 0x44, 0}, /* HDMI DC mode */
|
|
{0x32, 0x4a, 0},
|
|
{0x33, 0x0b, 0},
|
|
{0x34, 0x00, 0},
|
|
{0x35, 0x00, 0},
|
|
{0x36, 0x00, 0},
|
|
{0x37, 0x44, 0},
|
|
{0x3f, 0x0f, 0},
|
|
{0x40, 0xa0, 0},
|
|
{0x41, 0xa0, 0},
|
|
{0x42, 0xa0, 0},
|
|
{0x43, 0xa0, 0},
|
|
{0x44, 0x0a, 0},
|
|
};
|
|
|
|
if (!pdata || !cfg) {
|
|
pr_err("invalid input\n");
|
|
return ret;
|
|
}
|
|
|
|
/* HDMI AC mode */
|
|
if (pdata->ac_mode)
|
|
reg_cfg[2].val = 0x73;
|
|
|
|
lt9611_write_array(pdata, reg_cfg, sizeof(reg_cfg));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void lt9611_hdmi_output_enable(struct lt9611 *pdata)
|
|
{
|
|
lt9611_write(pdata, 0xff, 0x81);
|
|
lt9611_write(pdata, 0x30, 0xea);
|
|
}
|
|
|
|
static void lt9611_hdmi_output_disable(struct lt9611 *pdata)
|
|
{
|
|
lt9611_write(pdata, 0xff, 0x81);
|
|
lt9611_write(pdata, 0x30, 0x6a);
|
|
}
|
|
|
|
static irqreturn_t lt9611_irq_thread_handler(int irq, void *dev_id)
|
|
{
|
|
struct lt9611 *pdata = dev_id;
|
|
u8 irq_flag0 = 0;
|
|
u8 irq_flag3 = 0;
|
|
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_read(pdata, 0x0f, &irq_flag3, 1);
|
|
lt9611_read(pdata, 0x0c, &irq_flag0, 1);
|
|
|
|
/* hpd changed low */
|
|
if (irq_flag3 & BIT(7)) {
|
|
pr_info("hdmi cable disconnected\n");
|
|
|
|
lt9611_write(pdata, 0xff, 0x82); /* irq 3 clear flag */
|
|
lt9611_write(pdata, 0x07, 0xbf);
|
|
lt9611_write(pdata, 0x07, 0x3f);
|
|
}
|
|
/* hpd changed high */
|
|
if (irq_flag3 & BIT(6)) {
|
|
pr_info("hdmi cable connected\n");
|
|
|
|
lt9611_write(pdata, 0xff, 0x82); /* irq 3 clear flag */
|
|
lt9611_write(pdata, 0x07, 0x7f);
|
|
lt9611_write(pdata, 0x07, 0x3f);
|
|
}
|
|
|
|
/* video input changed */
|
|
if (irq_flag0 & BIT(0)) {
|
|
pr_info("video input changed\n");
|
|
lt9611_write(pdata, 0xff, 0x82); /* irq 0 clear flag */
|
|
lt9611_write(pdata, 0x9e, 0xff);
|
|
lt9611_write(pdata, 0x9e, 0xf7);
|
|
lt9611_write(pdata, 0x04, 0xff);
|
|
lt9611_write(pdata, 0x04, 0xfe);
|
|
}
|
|
|
|
if (irq_flag3 & (BIT(6) | BIT(7)))
|
|
queue_work(pdata->wq, &pdata->work);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int lt9611_enable_interrupts(struct lt9611 *pdata, int interrupts)
|
|
{
|
|
int ret = 0;
|
|
u8 reg_val = 0;
|
|
u8 init_reg_val;
|
|
|
|
if (!pdata) {
|
|
pr_err("invalid input\n");
|
|
goto end;
|
|
}
|
|
|
|
if (interrupts & CFG_VID_CHK_INTERRUPTS) {
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_read(pdata, 0x00, ®_val, 1);
|
|
|
|
if (reg_val & 0x01) {
|
|
init_reg_val = reg_val & 0xfe;
|
|
pr_debug("enabling video check interrupts\n");
|
|
lt9611_write(pdata, 0x00, init_reg_val);
|
|
}
|
|
lt9611_write(pdata, 0x04, 0xff); /* clear */
|
|
lt9611_write(pdata, 0x04, 0xfe);
|
|
}
|
|
|
|
if (interrupts & CFG_HPD_INTERRUPTS) {
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_read(pdata, 0x03, ®_val, 1);
|
|
|
|
if (reg_val & 0xc0) { //reg_val | 0xc0???
|
|
init_reg_val = reg_val & 0x3f;
|
|
pr_debug("enabling hpd interrupts\n");
|
|
lt9611_write(pdata, 0x03, init_reg_val);
|
|
}
|
|
|
|
lt9611_write(pdata, 0x07, 0xff); //clear
|
|
lt9611_write(pdata, 0x07, 0x3f);
|
|
}
|
|
|
|
end:
|
|
return ret;
|
|
}
|
|
|
|
static void lt9611_pcr_mk_debug(struct lt9611 *pdata)
|
|
{
|
|
u8 m = 0, k1 = 0, k2 = 0, k3 = 0;
|
|
|
|
lt9611_write(pdata, 0xff, 0x83);
|
|
lt9611_read(pdata, 0xb4, &m, 1);
|
|
lt9611_read(pdata, 0xb5, &k1, 1);
|
|
lt9611_read(pdata, 0xb6, &k2, 1);
|
|
lt9611_read(pdata, 0xb7, &k3, 1);
|
|
|
|
pr_info("pcr mk:0x%x 0x%x 0x%x 0x%x\n",
|
|
m, k1, k2, k3);
|
|
}
|
|
|
|
static void lt9611_sleep_setup(struct lt9611 *pdata)
|
|
{
|
|
struct lt9611_reg_cfg sleep_setup[] = {
|
|
{0xff, 0x80, 0}, //register I2C addr
|
|
{0x24, 0x76, 0},
|
|
{0x23, 0x01, 0},
|
|
{0xff, 0x81, 0}, //set addr pin as output
|
|
{0x57, 0x03, 0},
|
|
{0x49, 0x0b, 0},
|
|
{0xff, 0x81, 0}, //anlog power down
|
|
{0x51, 0x30, 0}, //disable IRQ
|
|
{0x02, 0x48, 0}, //MIPI Rx power down
|
|
{0x23, 0x80, 0},
|
|
{0x30, 0x00, 0},
|
|
{0x00, 0x01, 0}, //bandgap power down
|
|
{0x01, 0x00, 0}, //system clk power down
|
|
};
|
|
|
|
pr_err("sleep\n");
|
|
|
|
lt9611_write_array(pdata, sleep_setup, sizeof(sleep_setup));
|
|
}
|
|
|
|
static int lt9611_power_on(struct lt9611 *pdata, bool on)
|
|
{
|
|
int ret = 0;
|
|
|
|
pr_debug("power_on: on=%d\n", on);
|
|
|
|
if (on && !pdata->power_on) {
|
|
lt9611_write_array(pdata, lt9611_init_setup,
|
|
sizeof(lt9611_init_setup));
|
|
|
|
ret = lt9611_enable_interrupts(pdata, CFG_HPD_INTERRUPTS);
|
|
if (ret) {
|
|
pr_err("Failed to enable HPD intr %d\n", ret);
|
|
return ret;
|
|
}
|
|
pdata->power_on = true;
|
|
} else if (!on) {
|
|
lt9611_write(pdata, 0xff, 0x81);
|
|
lt9611_write(pdata, 0x30, 0x6a);
|
|
|
|
pdata->power_on = false;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_video_on(struct lt9611 *pdata, bool on)
|
|
{
|
|
int ret = 0;
|
|
struct lt9611_video_cfg *cfg = &pdata->video_cfg;
|
|
|
|
pr_debug("on=%d\n", on);
|
|
|
|
if (on) {
|
|
lt9611_mipi_input_analog(pdata, cfg);
|
|
lt9611_mipi_input_digital(pdata, cfg);
|
|
lt9611_pll_setup(pdata, cfg);
|
|
lt9611_mipi_video_setup(pdata, cfg);
|
|
lt9611_pcr_setup(pdata, cfg);
|
|
lt9611_hdmi_tx_digital(pdata, cfg);
|
|
lt9611_hdmi_tx_phy(pdata, cfg);
|
|
|
|
msleep(500);
|
|
|
|
lt9611_video_check(pdata);
|
|
lt9611_hdmi_output_enable(pdata);
|
|
} else {
|
|
lt9611_hdmi_output_disable(pdata);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void lt9611_mipi_byte_clk_debug(struct lt9611 *pdata)
|
|
{
|
|
u8 reg_val = 0;
|
|
u32 byte_clk;
|
|
|
|
/* port A byte clk meter */
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_write(pdata, 0xc7, 0x03); /* port A */
|
|
msleep(50);
|
|
lt9611_read(pdata, 0xcd, ®_val, 1);
|
|
|
|
if ((reg_val & 0x60) == 0x60) {
|
|
byte_clk = (reg_val & 0x0f) * 65536;
|
|
lt9611_read(pdata, 0xce, ®_val, 1);
|
|
byte_clk = byte_clk + reg_val * 256;
|
|
lt9611_read(pdata, 0xcf, ®_val, 1);
|
|
byte_clk = byte_clk + reg_val;
|
|
|
|
pr_info("port A byte clk = %d khz,\n", byte_clk);
|
|
} else
|
|
pr_info("port A byte clk unstable\n");
|
|
|
|
/* port B byte clk meter */
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_write(pdata, 0xc7, 0x04); /* port B */
|
|
msleep(50);
|
|
lt9611_read(pdata, 0xcd, ®_val, 1);
|
|
|
|
if ((reg_val & 0x60) == 0x60) {
|
|
byte_clk = (reg_val & 0x0f) * 65536;
|
|
lt9611_read(pdata, 0xce, ®_val, 1);
|
|
byte_clk = byte_clk + reg_val * 256;
|
|
lt9611_read(pdata, 0xcf, ®_val, 1);
|
|
byte_clk = byte_clk + reg_val;
|
|
|
|
pr_info("port B byte clk = %d khz,\n", byte_clk);
|
|
} else
|
|
pr_info("port B byte clk unstable\n");
|
|
}
|
|
|
|
static void lt9611_reset(struct lt9611 *pdata, bool on_off)
|
|
{
|
|
if (on_off) {
|
|
gpio_set_value(pdata->reset_gpio, 1);
|
|
msleep(20);
|
|
gpio_set_value(pdata->reset_gpio, 0);
|
|
msleep(20);
|
|
gpio_set_value(pdata->reset_gpio, 1);
|
|
msleep(20);
|
|
} else
|
|
gpio_set_value(pdata->reset_gpio, 0);
|
|
}
|
|
|
|
static void lt9611_assert_5v(struct lt9611 *pdata, bool on_off)
|
|
{
|
|
if (!gpio_is_valid(pdata->hdmi_en_gpio))
|
|
return;
|
|
|
|
if (on_off)
|
|
gpio_set_value(pdata->hdmi_en_gpio, 1);
|
|
else
|
|
gpio_set_value(pdata->hdmi_en_gpio, 0);
|
|
|
|
msleep(20);
|
|
}
|
|
|
|
static int lt9611_config_vreg(struct device *dev,
|
|
struct lt9611_vreg *in_vreg, int num_vreg, bool config)
|
|
{
|
|
int i = 0, rc = 0;
|
|
struct lt9611_vreg *curr_vreg = NULL;
|
|
|
|
if (!in_vreg || !num_vreg)
|
|
return rc;
|
|
|
|
if (config) {
|
|
for (i = 0; i < num_vreg; i++) {
|
|
curr_vreg = &in_vreg[i];
|
|
curr_vreg->vreg = regulator_get(dev,
|
|
curr_vreg->vreg_name);
|
|
rc = PTR_RET(curr_vreg->vreg);
|
|
if (rc) {
|
|
pr_err("%s get failed. rc=%d\n",
|
|
curr_vreg->vreg_name, rc);
|
|
curr_vreg->vreg = NULL;
|
|
goto vreg_get_fail;
|
|
}
|
|
|
|
rc = regulator_set_voltage(
|
|
curr_vreg->vreg,
|
|
curr_vreg->min_voltage,
|
|
curr_vreg->max_voltage);
|
|
if (rc < 0) {
|
|
pr_err("%s set vltg fail\n",
|
|
curr_vreg->vreg_name);
|
|
goto vreg_set_voltage_fail;
|
|
}
|
|
}
|
|
} else {
|
|
for (i = num_vreg-1; i >= 0; i--) {
|
|
curr_vreg = &in_vreg[i];
|
|
if (curr_vreg->vreg) {
|
|
regulator_set_voltage(curr_vreg->vreg,
|
|
0, curr_vreg->max_voltage);
|
|
|
|
regulator_put(curr_vreg->vreg);
|
|
curr_vreg->vreg = NULL;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
vreg_unconfig:
|
|
regulator_set_load(curr_vreg->vreg, 0);
|
|
|
|
vreg_set_voltage_fail:
|
|
regulator_put(curr_vreg->vreg);
|
|
curr_vreg->vreg = NULL;
|
|
|
|
vreg_get_fail:
|
|
for (i--; i >= 0; i--) {
|
|
curr_vreg = &in_vreg[i];
|
|
goto vreg_unconfig;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int lt9611_get_dt_supply(struct device *dev,
|
|
struct lt9611 *pdata)
|
|
{
|
|
int i = 0, rc = 0;
|
|
u32 tmp = 0;
|
|
struct device_node *of_node = NULL, *supply_root_node = NULL;
|
|
struct device_node *supply_node = NULL;
|
|
|
|
if (!dev || !pdata) {
|
|
pr_err("invalid input param dev:%pK pdata:%pK\n", dev, pdata);
|
|
return -EINVAL;
|
|
}
|
|
|
|
of_node = dev->of_node;
|
|
|
|
pdata->num_vreg = 0;
|
|
supply_root_node = of_get_child_by_name(of_node,
|
|
"lt,supply-entries");
|
|
if (!supply_root_node) {
|
|
pr_info("no supply entry present\n");
|
|
return 0;
|
|
}
|
|
|
|
pdata->num_vreg = of_get_available_child_count(supply_root_node);
|
|
if (pdata->num_vreg == 0) {
|
|
pr_info("no vreg present\n");
|
|
return 0;
|
|
}
|
|
|
|
pr_debug("vreg found. count=%d\n", pdata->num_vreg);
|
|
pdata->vreg_config = devm_kzalloc(dev, sizeof(struct lt9611_vreg) *
|
|
pdata->num_vreg, GFP_KERNEL);
|
|
if (!pdata->vreg_config)
|
|
return -ENOMEM;
|
|
|
|
for_each_available_child_of_node(supply_root_node, supply_node) {
|
|
const char *st = NULL;
|
|
|
|
rc = of_property_read_string(supply_node,
|
|
"lt,supply-name", &st);
|
|
if (rc) {
|
|
pr_err("error reading name. rc=%d\n", rc);
|
|
goto error;
|
|
}
|
|
|
|
strlcpy(pdata->vreg_config[i].vreg_name, st,
|
|
sizeof(pdata->vreg_config[i].vreg_name));
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-min-voltage", &tmp);
|
|
if (rc) {
|
|
pr_err("error reading min volt. rc=%d\n", rc);
|
|
goto error;
|
|
}
|
|
pdata->vreg_config[i].min_voltage = tmp;
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-max-voltage", &tmp);
|
|
if (rc) {
|
|
pr_err("error reading max volt. rc=%d\n", rc);
|
|
goto error;
|
|
}
|
|
pdata->vreg_config[i].max_voltage = tmp;
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-enable-load", &tmp);
|
|
if (rc)
|
|
pr_debug("no supply enable load value. rc=%d\n", rc);
|
|
|
|
pdata->vreg_config[i].enable_load = (!rc ? tmp : 0);
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-disable-load", &tmp);
|
|
if (rc)
|
|
pr_debug("no supply disable load value. rc=%d\n", rc);
|
|
|
|
pdata->vreg_config[i].disable_load = (!rc ? tmp : 0);
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-pre-on-sleep", &tmp);
|
|
if (rc)
|
|
pr_debug("no supply pre on sleep value. rc=%d\n", rc);
|
|
|
|
pdata->vreg_config[i].pre_on_sleep = (!rc ? tmp : 0);
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-pre-off-sleep", &tmp);
|
|
if (rc)
|
|
pr_debug("no supply pre off sleep value. rc=%d\n", rc);
|
|
|
|
pdata->vreg_config[i].pre_off_sleep = (!rc ? tmp : 0);
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-post-on-sleep", &tmp);
|
|
if (rc)
|
|
pr_debug("no supply post on sleep value. rc=%d\n", rc);
|
|
|
|
pdata->vreg_config[i].post_on_sleep = (!rc ? tmp : 0);
|
|
|
|
rc = of_property_read_u32(supply_node,
|
|
"lt,supply-post-off-sleep", &tmp);
|
|
if (rc)
|
|
pr_debug("no supply post off sleep value. rc=%d\n", rc);
|
|
|
|
pdata->vreg_config[i].post_off_sleep = (!rc ? tmp : 0);
|
|
|
|
pr_debug("%s min=%d, max=%d, enable=%d, disable=%d, preonsleep=%d, postonsleep=%d, preoffsleep=%d, postoffsleep=%d\n",
|
|
pdata->vreg_config[i].vreg_name,
|
|
pdata->vreg_config[i].min_voltage,
|
|
pdata->vreg_config[i].max_voltage,
|
|
pdata->vreg_config[i].enable_load,
|
|
pdata->vreg_config[i].disable_load,
|
|
pdata->vreg_config[i].pre_on_sleep,
|
|
pdata->vreg_config[i].post_on_sleep,
|
|
pdata->vreg_config[i].pre_off_sleep,
|
|
pdata->vreg_config[i].post_off_sleep);
|
|
++i;
|
|
|
|
rc = 0;
|
|
}
|
|
|
|
rc = lt9611_config_vreg(dev,
|
|
pdata->vreg_config, pdata->num_vreg, true);
|
|
if (rc)
|
|
goto error;
|
|
|
|
return rc;
|
|
|
|
error:
|
|
if (pdata->vreg_config) {
|
|
devm_kfree(dev, pdata->vreg_config);
|
|
pdata->vreg_config = NULL;
|
|
pdata->num_vreg = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void lt9611_put_dt_supply(struct device *dev,
|
|
struct lt9611 *pdata)
|
|
{
|
|
if (!dev || !pdata) {
|
|
pr_err("invalid input param dev:%pK pdata:%pK\n", dev, pdata);
|
|
return;
|
|
}
|
|
|
|
lt9611_config_vreg(dev,
|
|
pdata->vreg_config, pdata->num_vreg, false);
|
|
|
|
if (pdata->vreg_config) {
|
|
devm_kfree(dev, pdata->vreg_config);
|
|
pdata->vreg_config = NULL;
|
|
}
|
|
pdata->num_vreg = 0;
|
|
}
|
|
|
|
static int lt9611_enable_vreg(struct lt9611 *pdata, int enable)
|
|
{
|
|
int i = 0, rc = 0;
|
|
bool need_sleep;
|
|
struct lt9611_vreg *in_vreg = pdata->vreg_config;
|
|
int num_vreg = pdata->num_vreg;
|
|
|
|
if (enable) {
|
|
for (i = 0; i < num_vreg; i++) {
|
|
rc = PTR_RET(in_vreg[i].vreg);
|
|
if (rc) {
|
|
pr_err("%s regulator error. rc=%d\n",
|
|
in_vreg[i].vreg_name, rc);
|
|
goto vreg_set_opt_mode_fail;
|
|
}
|
|
|
|
need_sleep = !regulator_is_enabled(in_vreg[i].vreg);
|
|
if (in_vreg[i].pre_on_sleep && need_sleep)
|
|
usleep_range(in_vreg[i].pre_on_sleep * 1000,
|
|
in_vreg[i].pre_on_sleep * 1000);
|
|
|
|
rc = regulator_set_load(in_vreg[i].vreg,
|
|
in_vreg[i].enable_load);
|
|
if (rc < 0) {
|
|
pr_err("%s set opt m fail\n",
|
|
in_vreg[i].vreg_name);
|
|
goto vreg_set_opt_mode_fail;
|
|
}
|
|
|
|
rc = regulator_enable(in_vreg[i].vreg);
|
|
if (in_vreg[i].post_on_sleep && need_sleep)
|
|
usleep_range(in_vreg[i].post_on_sleep * 1000,
|
|
in_vreg[i].post_on_sleep * 1000);
|
|
if (rc < 0) {
|
|
pr_err("%s enable failed\n",
|
|
in_vreg[i].vreg_name);
|
|
goto disable_vreg;
|
|
}
|
|
}
|
|
} else {
|
|
for (i = num_vreg-1; i >= 0; i--) {
|
|
if (in_vreg[i].pre_off_sleep)
|
|
usleep_range(in_vreg[i].pre_off_sleep * 1000,
|
|
in_vreg[i].pre_off_sleep * 1000);
|
|
|
|
regulator_set_load(in_vreg[i].vreg,
|
|
in_vreg[i].disable_load);
|
|
regulator_disable(in_vreg[i].vreg);
|
|
|
|
if (in_vreg[i].post_off_sleep)
|
|
usleep_range(in_vreg[i].post_off_sleep * 1000,
|
|
in_vreg[i].post_off_sleep * 1000);
|
|
}
|
|
}
|
|
return rc;
|
|
|
|
disable_vreg:
|
|
regulator_set_load(in_vreg[i].vreg, in_vreg[i].disable_load);
|
|
|
|
vreg_set_opt_mode_fail:
|
|
for (i--; i >= 0; i--) {
|
|
if (in_vreg[i].pre_off_sleep)
|
|
usleep_range(in_vreg[i].pre_off_sleep * 1000,
|
|
in_vreg[i].pre_off_sleep * 1000);
|
|
|
|
regulator_set_load(in_vreg[i].vreg,
|
|
in_vreg[i].disable_load);
|
|
regulator_disable(in_vreg[i].vreg);
|
|
|
|
if (in_vreg[i].post_off_sleep)
|
|
usleep_range(in_vreg[i].post_off_sleep * 1000,
|
|
in_vreg[i].post_off_sleep * 1000);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct lt9611_timing_info *lt9611_get_supported_timing(
|
|
struct drm_display_mode *mode)
|
|
{
|
|
int i = 0;
|
|
|
|
while (lt9611_supp_timing_cfg[i].xres != 0xffff) {
|
|
if (lt9611_supp_timing_cfg[i].xres == mode->hdisplay &&
|
|
lt9611_supp_timing_cfg[i].yres == mode->vdisplay &&
|
|
lt9611_supp_timing_cfg[i].fps ==
|
|
drm_mode_vrefresh(mode)) {
|
|
return <9611_supp_timing_cfg[i];
|
|
}
|
|
i++;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* TODO: intf/lane number needs info from both DSI host and client */
|
|
static int lt9611_get_intf_num(struct lt9611 *pdata,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
int num_of_intfs = 0;
|
|
struct lt9611_timing_info *timing =
|
|
lt9611_get_supported_timing(mode);
|
|
|
|
if (timing)
|
|
num_of_intfs = timing->intfs;
|
|
else {
|
|
pr_err("interface number not defined by bridge chip\n");
|
|
num_of_intfs = 0;
|
|
}
|
|
|
|
return num_of_intfs;
|
|
}
|
|
|
|
static int lt9611_get_lane_num(struct lt9611 *pdata,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
int num_of_lanes = 0;
|
|
struct lt9611_timing_info *timing =
|
|
lt9611_get_supported_timing(mode);
|
|
|
|
if (timing)
|
|
num_of_lanes = timing->lanes;
|
|
else {
|
|
pr_err("lane number not defined by bridge chip\n");
|
|
num_of_lanes = 0;
|
|
}
|
|
|
|
return num_of_lanes;
|
|
}
|
|
|
|
static void lt9611_get_video_cfg(struct lt9611 *pdata,
|
|
struct drm_display_mode *mode,
|
|
struct lt9611_video_cfg *video_cfg)
|
|
{
|
|
int rc = 0;
|
|
struct hdmi_avi_infoframe avi_frame;
|
|
|
|
memset(&avi_frame, 0, sizeof(avi_frame));
|
|
|
|
video_cfg->h_active = mode->hdisplay;
|
|
video_cfg->v_active = mode->vdisplay;
|
|
video_cfg->h_front_porch = mode->hsync_start - mode->hdisplay;
|
|
video_cfg->v_front_porch = mode->vsync_start - mode->vdisplay;
|
|
video_cfg->h_back_porch = mode->htotal - mode->hsync_end;
|
|
video_cfg->v_back_porch = mode->vtotal - mode->vsync_end;
|
|
video_cfg->h_pulse_width = mode->hsync_end - mode->hsync_start;
|
|
video_cfg->v_pulse_width = mode->vsync_end - mode->vsync_start;
|
|
video_cfg->pclk_khz = mode->clock;
|
|
|
|
video_cfg->h_polarity = !!(mode->flags & DRM_MODE_FLAG_PHSYNC);
|
|
video_cfg->v_polarity = !!(mode->flags & DRM_MODE_FLAG_PVSYNC);
|
|
|
|
video_cfg->num_of_lanes = lt9611_get_lane_num(pdata, mode);
|
|
video_cfg->num_of_intfs = lt9611_get_intf_num(pdata, mode);
|
|
|
|
pr_debug("video=h[%d,%d,%d,%d] v[%d,%d,%d,%d] pclk=%d lane=%d intf=%d\n",
|
|
video_cfg->h_active, video_cfg->h_front_porch,
|
|
video_cfg->h_pulse_width, video_cfg->h_back_porch,
|
|
video_cfg->v_active, video_cfg->v_front_porch,
|
|
video_cfg->v_pulse_width, video_cfg->v_back_porch,
|
|
video_cfg->pclk_khz, video_cfg->num_of_lanes,
|
|
video_cfg->num_of_intfs);
|
|
|
|
rc = drm_hdmi_avi_infoframe_from_display_mode(&avi_frame, mode, false);
|
|
if (rc) {
|
|
pr_err("get avi frame failed ret=%d\n", rc);
|
|
} else {
|
|
video_cfg->scaninfo = avi_frame.scan_mode;
|
|
video_cfg->ar = avi_frame.picture_aspect;
|
|
video_cfg->vic = avi_frame.video_code;
|
|
pr_debug("scaninfo=%d ar=%d vic=%d\n",
|
|
video_cfg->scaninfo, video_cfg->ar, video_cfg->vic);
|
|
}
|
|
}
|
|
|
|
/* connector funcs */
|
|
static enum drm_connector_status
|
|
lt9611_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct lt9611 *pdata = connector_to_lt9611(connector);
|
|
|
|
if (!pdata->non_pluggable || force) {
|
|
u8 reg_val = 0;
|
|
int connected = 0;
|
|
|
|
lt9611_write(pdata, 0xff, 0x82);
|
|
lt9611_read(pdata, 0x5e, ®_val, 1);
|
|
connected = (reg_val & BIT(2));
|
|
pr_debug("connected = %x\n", connected);
|
|
|
|
pdata->status = connected ? connector_status_connected :
|
|
connector_status_disconnected;
|
|
} else
|
|
pdata->status = connector_status_connected;
|
|
|
|
return pdata->status;
|
|
}
|
|
|
|
static int lt9611_read_edid(struct lt9611 *pdata)
|
|
{
|
|
int ret = 0;
|
|
u8 i, j;
|
|
u8 temp = 0;
|
|
|
|
if (!pdata) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(pdata->edid_buf, 0, EDID_SEG_SIZE);
|
|
|
|
lt9611_write(pdata, 0xff, 0x85);
|
|
lt9611_write(pdata, 0x03, 0xc9);
|
|
lt9611_write(pdata, 0x04, 0xa0); /* 0xA0 is EDID device address */
|
|
lt9611_write(pdata, 0x05, 0x00); /* 0x00 is EDID offset address */
|
|
lt9611_write(pdata, 0x06, 0x20); /* length for read */
|
|
lt9611_write(pdata, 0x14, 0x7f);
|
|
|
|
for (i = 0 ; i < 8 ; i++) {
|
|
lt9611_write(pdata, 0x05, i * 32); /* offset address */
|
|
lt9611_write(pdata, 0x07, 0x36);
|
|
lt9611_write(pdata, 0x07, 0x31);
|
|
lt9611_write(pdata, 0x07, 0x37);
|
|
usleep_range(5000, 10000);
|
|
|
|
lt9611_read(pdata, 0x40, &temp, 1);
|
|
|
|
if (temp & 0x02) { /*KEY_DDC_ACCS_DONE=1*/
|
|
for (j = 0; j < 32; j++) {
|
|
lt9611_read(pdata, 0x83,
|
|
&(pdata->edid_buf[i*32+j]), 1);
|
|
}
|
|
} else if (temp & 0x50) { /* DDC No Ack or Abitration lost */
|
|
pr_err("read edid failed: no ack\n");
|
|
ret = -EIO;
|
|
goto end;
|
|
} else {
|
|
pr_err("read edid failed: access not done\n");
|
|
ret = -EIO;
|
|
goto end;
|
|
}
|
|
}
|
|
|
|
pr_debug("read edid succeeded, checksum = 0x%x\n",
|
|
pdata->edid_buf[255]);
|
|
|
|
end:
|
|
lt9611_write(pdata, 0x07, 0x1f);
|
|
return ret;
|
|
}
|
|
|
|
/* TODO: add support for more extenstion blocks */
|
|
static int lt9611_get_edid_block(void *data, u8 *buf, unsigned int block,
|
|
size_t len)
|
|
{
|
|
struct lt9611 *pdata = data;
|
|
int ret = 0;
|
|
|
|
pr_debug("get edid block: block=%d, len=%d\n", block, (int)len);
|
|
|
|
if (len > 128)
|
|
return -EINVAL;
|
|
|
|
/* support up to 1 extension block */
|
|
if (block > 1)
|
|
return -EINVAL;
|
|
|
|
if (block == 0) {
|
|
/* always read 2 edid blocks once */
|
|
ret = lt9611_read_edid(pdata);
|
|
if (ret) {
|
|
pr_err("edid read failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (block % 2 == 0)
|
|
memcpy(buf, pdata->edid_buf, len);
|
|
else
|
|
memcpy(buf, pdata->edid_buf + 128, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lt9611_set_preferred_mode(struct drm_connector *connector)
|
|
{
|
|
struct lt9611 *pdata = connector_to_lt9611(connector);
|
|
struct drm_display_mode *mode;
|
|
const char *string;
|
|
|
|
/* use specified mode as preferred */
|
|
if (!of_property_read_string(pdata->dev->of_node,
|
|
"lt,preferred-mode", &string)) {
|
|
list_for_each_entry(mode, &connector->probed_modes, head) {
|
|
if (!strcmp(mode->name, string))
|
|
mode->type |= DRM_MODE_TYPE_PREFERRED;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int lt9611_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct lt9611 *pdata = connector_to_lt9611(connector);
|
|
struct drm_display_mode *mode, *m;
|
|
unsigned int count = 0;
|
|
|
|
pr_debug("get modes\n");
|
|
|
|
if (pdata->non_pluggable) {
|
|
list_for_each_entry(mode, &pdata->mode_list, head) {
|
|
m = drm_mode_duplicate(connector->dev, mode);
|
|
if (!m) {
|
|
pr_err("failed to add hdmi mode %dx%d\n",
|
|
mode->hdisplay, mode->vdisplay);
|
|
break;
|
|
}
|
|
drm_mode_probed_add(connector, m);
|
|
}
|
|
count = pdata->num_of_modes;
|
|
} else {
|
|
struct edid *edid;
|
|
|
|
if (!pdata->power_on)
|
|
lt9611_power_on(pdata, true);
|
|
edid = drm_do_get_edid(connector, lt9611_get_edid_block, pdata);
|
|
|
|
drm_mode_connector_update_edid_property(connector, edid);
|
|
count = drm_add_edid_modes(connector, edid);
|
|
|
|
pdata->hdmi_mode = drm_detect_hdmi_monitor(edid);
|
|
pr_debug("hdmi_mode = %d\n", pdata->hdmi_mode);
|
|
|
|
kfree(edid);
|
|
}
|
|
|
|
lt9611_set_preferred_mode(connector);
|
|
|
|
return count;
|
|
}
|
|
|
|
static enum drm_mode_status lt9611_connector_mode_valid(
|
|
struct drm_connector *connector, struct drm_display_mode *mode)
|
|
{
|
|
struct lt9611_timing_info *timing =
|
|
lt9611_get_supported_timing(mode);
|
|
|
|
return timing ? MODE_OK : MODE_BAD;
|
|
}
|
|
|
|
/* bridge funcs */
|
|
static void lt9611_bridge_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct lt9611 *pdata = bridge_to_lt9611(bridge);
|
|
|
|
pr_debug("bridge enable\n");
|
|
|
|
if (lt9611_power_on(pdata, true)) {
|
|
pr_err("power on failed\n");
|
|
return;
|
|
}
|
|
|
|
if (lt9611_video_on(pdata, true)) {
|
|
pr_err("video on failed\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void lt9611_bridge_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct lt9611 *pdata = bridge_to_lt9611(bridge);
|
|
|
|
pr_debug("bridge disable\n");
|
|
|
|
if (lt9611_video_on(pdata, false)) {
|
|
pr_err("video on failed\n");
|
|
return;
|
|
}
|
|
|
|
if (lt9611_power_on(pdata, false)) {
|
|
pr_err("power on failed\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void lt9611_bridge_mode_set(struct drm_bridge *bridge,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adj_mode)
|
|
{
|
|
struct lt9611 *pdata = bridge_to_lt9611(bridge);
|
|
struct lt9611_video_cfg *video_cfg = &pdata->video_cfg;
|
|
int ret = 0;
|
|
|
|
pr_debug("bridge mode_set: hdisplay=%d, vdisplay=%d, vrefresh=%d, clock=%d\n",
|
|
adj_mode->hdisplay, adj_mode->vdisplay,
|
|
adj_mode->vrefresh, adj_mode->clock);
|
|
|
|
drm_mode_copy(&pdata->curr_mode, adj_mode);
|
|
|
|
memset(video_cfg, 0, sizeof(struct lt9611_video_cfg));
|
|
lt9611_get_video_cfg(pdata, adj_mode, video_cfg);
|
|
|
|
/* TODO: update intf number of host */
|
|
if (video_cfg->num_of_lanes != pdata->dsi->lanes) {
|
|
mipi_dsi_detach(pdata->dsi);
|
|
pdata->dsi->lanes = video_cfg->num_of_lanes;
|
|
ret = mipi_dsi_attach(pdata->dsi);
|
|
if (ret)
|
|
pr_err("failed to change host lanes\n");
|
|
}
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs lt9611_connector_helper_funcs = {
|
|
.get_modes = lt9611_connector_get_modes,
|
|
.mode_valid = lt9611_connector_mode_valid,
|
|
};
|
|
|
|
|
|
static const struct drm_connector_funcs lt9611_connector_funcs = {
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.detect = lt9611_connector_detect,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
|
|
static int lt9611_bridge_attach(struct drm_bridge *bridge)
|
|
{
|
|
struct mipi_dsi_host *host;
|
|
struct mipi_dsi_device *dsi;
|
|
struct lt9611 *pdata = bridge_to_lt9611(bridge);
|
|
int ret;
|
|
const struct mipi_dsi_device_info info = { .type = "lt9611",
|
|
.channel = 0,
|
|
.node = NULL,
|
|
};
|
|
|
|
pr_debug("bridge attach\n");
|
|
|
|
if (!bridge->encoder) {
|
|
DRM_ERROR("Parent encoder object not found");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = drm_connector_init(bridge->dev, &pdata->connector,
|
|
<9611_connector_funcs,
|
|
DRM_MODE_CONNECTOR_HDMIA);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to initialize connector: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
drm_connector_helper_add(&pdata->connector,
|
|
<9611_connector_helper_funcs);
|
|
|
|
ret = drm_connector_register(&pdata->connector);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to register connector: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pdata->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
|
|
|
|
ret = drm_mode_connector_attach_encoder(&pdata->connector,
|
|
bridge->encoder);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to link up connector to encoder: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
host = of_find_mipi_dsi_host_by_node(pdata->host_node);
|
|
if (!host) {
|
|
pr_err("failed to find dsi host\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
dsi = mipi_dsi_device_register_full(host, &info);
|
|
if (IS_ERR(dsi)) {
|
|
pr_err("failed to create dsi device\n");
|
|
ret = PTR_ERR(dsi);
|
|
goto err_dsi_device;
|
|
}
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
|
|
MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO_BLLP |
|
|
MIPI_DSI_MODE_VIDEO_EOF_BLLP;
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
pr_err("failed to attach dsi to host\n");
|
|
goto err_dsi_attach;
|
|
}
|
|
|
|
pdata->dsi = dsi;
|
|
|
|
return 0;
|
|
|
|
err_dsi_attach:
|
|
mipi_dsi_device_unregister(dsi);
|
|
err_dsi_device:
|
|
return ret;
|
|
}
|
|
|
|
static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct lt9611 *pdata = bridge_to_lt9611(bridge);
|
|
|
|
pr_debug("bridge pre_enable\n");
|
|
|
|
lt9611_reset(pdata, true);
|
|
|
|
lt9611_write(pdata, 0xff, 0x80);
|
|
lt9611_write(pdata, 0xee, 0x01);
|
|
}
|
|
|
|
static bool lt9611_bridge_mode_fixup(struct drm_bridge *bridge,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
pr_debug("bridge mode_fixup\n");
|
|
|
|
return true;
|
|
}
|
|
|
|
static void lt9611_bridge_post_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct lt9611 *pdata = bridge_to_lt9611(bridge);
|
|
|
|
pr_debug("bridge post_disable\n");
|
|
|
|
lt9611_sleep_setup(pdata);
|
|
}
|
|
|
|
static const struct drm_bridge_funcs lt9611_bridge_funcs = {
|
|
.attach = lt9611_bridge_attach,
|
|
.mode_fixup = lt9611_bridge_mode_fixup,
|
|
.pre_enable = lt9611_bridge_pre_enable,
|
|
.enable = lt9611_bridge_enable,
|
|
.disable = lt9611_bridge_disable,
|
|
.post_disable = lt9611_bridge_post_disable,
|
|
.mode_set = lt9611_bridge_mode_set,
|
|
};
|
|
|
|
/* sysfs */
|
|
static int lt9611_dump_debug_info(struct lt9611 *pdata)
|
|
{
|
|
if (!pdata->power_on) {
|
|
pr_err("device is not power on\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt9611_video_check(pdata);
|
|
|
|
lt9611_pcr_mk_debug(pdata);
|
|
|
|
lt9611_mipi_byte_clk_debug(pdata);
|
|
|
|
lt9611_read_edid(pdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t lt9611_dump_info_wta_attr(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
struct lt9611 *pdata = dev_get_drvdata(dev);
|
|
|
|
if (!pdata) {
|
|
pr_err("pdata is NULL\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt9611_dump_debug_info(pdata);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(dump_info, 0200, NULL, lt9611_dump_info_wta_attr);
|
|
|
|
static struct attribute *lt9611_sysfs_attrs[] = {
|
|
&dev_attr_dump_info.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group lt9611_sysfs_attr_grp = {
|
|
.attrs = lt9611_sysfs_attrs,
|
|
};
|
|
|
|
static int lt9611_sysfs_init(struct device *dev)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (!dev) {
|
|
pr_err("%s: Invalid params\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rc = sysfs_create_group(&dev->kobj, <9611_sysfs_attr_grp);
|
|
if (rc)
|
|
pr_err("%s: sysfs group creation failed %d\n", __func__, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void lt9611_sysfs_remove(struct device *dev)
|
|
{
|
|
if (!dev) {
|
|
pr_err("%s: Invalid params\n", __func__);
|
|
return;
|
|
}
|
|
|
|
sysfs_remove_group(&dev->kobj, <9611_sysfs_attr_grp);
|
|
}
|
|
|
|
static int lt9611_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lt9611 *pdata;
|
|
int ret = 0;
|
|
|
|
if (!client || !client->dev.of_node) {
|
|
pr_err("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
pr_err("device doesn't support I2C\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pdata = devm_kzalloc(&client->dev,
|
|
sizeof(struct lt9611), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
ret = lt9611_parse_dt(&client->dev, pdata);
|
|
if (ret) {
|
|
pr_err("failed to parse device tree\n");
|
|
goto err_dt_parse;
|
|
}
|
|
|
|
ret = lt9611_get_dt_supply(&client->dev, pdata);
|
|
if (ret) {
|
|
pr_err("failed to get dt supply\n");
|
|
goto err_dt_parse;
|
|
}
|
|
|
|
pdata->dev = &client->dev;
|
|
pdata->i2c_client = client;
|
|
pr_debug("I2C address is %x\n", client->addr);
|
|
|
|
ret = lt9611_gpio_configure(pdata, true);
|
|
if (ret) {
|
|
pr_err("failed to configure GPIOs\n");
|
|
goto err_dt_supply;
|
|
}
|
|
|
|
lt9611_assert_5v(pdata, true);
|
|
|
|
ret = lt9611_enable_vreg(pdata, true);
|
|
if (ret) {
|
|
pr_err("failed to enable vreg\n");
|
|
goto err_dt_supply;
|
|
}
|
|
|
|
lt9611_reset(pdata, true);
|
|
|
|
pdata->regulator_on = true;
|
|
|
|
ret = lt9611_read_device_rev(pdata);
|
|
if (ret) {
|
|
pr_err("failed to read chip rev\n");
|
|
goto err_i2c_prog;
|
|
}
|
|
|
|
pdata->irq = gpio_to_irq(pdata->irq_gpio);
|
|
ret = request_threaded_irq(pdata->irq, NULL, lt9611_irq_thread_handler,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lt9611", pdata);
|
|
if (ret) {
|
|
pr_err("failed to request irq\n");
|
|
goto err_i2c_prog;
|
|
}
|
|
|
|
i2c_set_clientdata(client, pdata);
|
|
dev_set_drvdata(&client->dev, pdata);
|
|
|
|
ret = lt9611_sysfs_init(&client->dev);
|
|
if (ret) {
|
|
pr_err("sysfs init failed\n");
|
|
goto err_sysfs_init;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
pdata->bridge.of_node = client->dev.of_node;
|
|
#endif
|
|
|
|
pdata->bridge.funcs = <9611_bridge_funcs;
|
|
/*pdata->bridge.of_node = client->dev.of_node;*/
|
|
|
|
drm_bridge_add(&pdata->bridge);
|
|
|
|
pdata->wq = create_singlethread_workqueue("lt9611_wk");
|
|
if (!pdata->wq) {
|
|
pr_err("Error creating lt9611 wq\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
INIT_WORK(&pdata->work, lt9611_hpd_work);
|
|
|
|
return 0;
|
|
|
|
err_sysfs_init:
|
|
disable_irq(pdata->irq);
|
|
free_irq(pdata->irq, pdata);
|
|
err_i2c_prog:
|
|
lt9611_gpio_configure(pdata, false);
|
|
err_dt_supply:
|
|
lt9611_put_dt_supply(&client->dev, pdata);
|
|
err_dt_parse:
|
|
devm_kfree(&client->dev, pdata);
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611_remove(struct i2c_client *client)
|
|
{
|
|
int ret = -EINVAL;
|
|
struct lt9611 *pdata = i2c_get_clientdata(client);
|
|
struct drm_display_mode *mode, *n;
|
|
|
|
if (!pdata)
|
|
goto end;
|
|
|
|
mipi_dsi_detach(pdata->dsi);
|
|
mipi_dsi_device_unregister(pdata->dsi);
|
|
|
|
drm_bridge_remove(&pdata->bridge);
|
|
|
|
lt9611_sysfs_remove(&client->dev);
|
|
|
|
disable_irq(pdata->irq);
|
|
free_irq(pdata->irq, pdata);
|
|
|
|
ret = lt9611_gpio_configure(pdata, false);
|
|
|
|
lt9611_put_dt_supply(&client->dev, pdata);
|
|
|
|
if (pdata->non_pluggable) {
|
|
list_for_each_entry_safe(mode, n, &pdata->mode_list, head) {
|
|
list_del(&mode->head);
|
|
kfree(mode);
|
|
}
|
|
}
|
|
|
|
if (pdata->wq)
|
|
destroy_workqueue(pdata->wq);
|
|
|
|
devm_kfree(&client->dev, pdata);
|
|
|
|
end:
|
|
return ret;
|
|
}
|
|
|
|
static void lt9611_device_power_ctl(struct lt9611 *pdata, bool on_off)
|
|
{
|
|
int ret = 0;
|
|
|
|
lt9611_assert_5v(pdata, on_off);
|
|
|
|
ret = lt9611_enable_vreg(pdata, on_off);
|
|
|
|
if (ret)
|
|
pr_err("failed to set vreg state %d\n", on_off);
|
|
|
|
lt9611_reset(pdata, on_off);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int lt9611_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lt9611 *pdata = i2c_get_clientdata(client);
|
|
|
|
if (pdata->regulator_on) {
|
|
disable_irq(pdata->irq);
|
|
lt9611_device_power_ctl(pdata, false);
|
|
pdata->regulator_on = false;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lt9611 *pdata = i2c_get_clientdata(client);
|
|
|
|
if (!pdata->regulator_on) {
|
|
lt9611_device_power_ctl(pdata, true);
|
|
enable_irq(pdata->irq);
|
|
pdata->regulator_on = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops lt9611_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(lt9611_suspend, lt9611_resume)
|
|
};
|
|
#endif
|
|
|
|
static struct i2c_device_id lt9611_id[] = {
|
|
{ "lt,lt9611", 0},
|
|
{}
|
|
};
|
|
|
|
static const struct of_device_id lt9611_match_table[] = {
|
|
{.compatible = "lt,lt9611"},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lt9611_match_table);
|
|
|
|
static struct i2c_driver lt9611_driver = {
|
|
.driver = {
|
|
.name = "lt9611",
|
|
.owner = THIS_MODULE,
|
|
#ifdef CONFIG_OF
|
|
.of_match_table = lt9611_match_table,
|
|
#endif
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = <9611_pm,
|
|
#endif
|
|
},
|
|
.probe = lt9611_probe,
|
|
.remove = lt9611_remove,
|
|
.id_table = lt9611_id,
|
|
};
|
|
|
|
static int __init lt9611_init(void)
|
|
{
|
|
return i2c_add_driver(<9611_driver);
|
|
}
|
|
|
|
static void __exit lt9611_exit(void)
|
|
{
|
|
i2c_del_driver(<9611_driver);
|
|
}
|
|
|
|
module_init(lt9611_init);
|
|
module_exit(lt9611_exit);
|
|
|
|
|