Simon1511
1 year ago
committed by
Ruchit
parent
cfcfc5772c
commit
bfb3e38bac
@ -1,26 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "../common/sm7150-sec-a71-battery-common.dtsi" |
||||
|
||||
&soc { |
||||
battery { |
||||
/* direct step charging option */ |
||||
battery,dc_step_chg_step = <4>; |
||||
battery,dc_step_chg_cond_vol = <4090 4190 4320 4350>; /* STEP_CHARGING_CONDITION_VOLTAGE */ |
||||
battery,dc_step_chg_cond_iin = <1950 1575 1050 0>; /* STEP_CHARGING_CONDITION_INPUT_CURRENT */ |
||||
battery,dc_step_chg_iin_check_cnt = <3>; |
||||
battery,dc_step_chg_cond_soc = <9 48 80 100>; /* STEP_CHARGING_CONDITION_SOC */ |
||||
battery,dc_step_chg_val_vfloat = <4090 4190 4320 4350>; /* STEP_CHARGING_CONDITION_FLOAT_VOLTAGE */ |
||||
battery,dc_step_chg_val_iout = <4600 3900 3100 2100>; |
||||
}; |
||||
}; |
||||
@ -1,48 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
|
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
usbpd_irq: usbpd_irq { |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
if_pmic_irq: if_pmic_irq { |
||||
mux { |
||||
pins = "gpio68"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio68"; |
||||
drive-strength = <2>; /* 16 mA */ |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
|
||||
}; |
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,54 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
/* s2mu106_fg i2c */ |
||||
s2mu106_fg_i2c: s2mu106_fg_i2c { |
||||
s2mu106_fg_active: s2mu106_fg_active { |
||||
mux { |
||||
pins = "gpio102", "gpio101"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio102", "gpio101"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
dc_irq_default: dc_irq_default { |
||||
config { |
||||
pins = "gpio57"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
@ -1,46 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-can-pinctrl-r00.dtsi" |
||||
|
||||
#include "../common/sm7150-sec-a71-common.dtsi" |
||||
// #include "sm6150-sec-a70q-input-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-pm-common.dtsi" |
||||
#include "sm7150-sec-a71-battery-can-r00.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-eif-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-fingerprint_00.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-nfc-r00.dtsi" |
||||
#include "../drivers/sm7150-camera-sensor-a71-r01.dtsi" |
||||
//#include "../drivers/sm7150-sec-a71-display-r00.dtsi" |
||||
|
||||
&wcd937x_codec { |
||||
imp-table = <&imp_list 0 5 6>, |
||||
<&imp_list 6 21 6>, |
||||
<&imp_list 22 36 6>, |
||||
<&imp_list 37 100 6>, |
||||
<&imp_list 101 160 7>, |
||||
<&imp_list 161 400 8>, |
||||
<&imp_list 401 2000 8>, |
||||
<&imp_list 2001 0x7fffffff 6>; |
||||
}; |
||||
|
||||
&soc { |
||||
sec_thermistor@0 { |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
sdm_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-can-r00.dtsi"
#include "sm7150-sec-a71-can-pinctrl-r01.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-can-r01.dtsi"
#include "sm7150-sec-a71-can-pinctrl-r02.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-can-r02.dtsi"
#include "sm7150-sec-a71-can-pinctrl-r03.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,16 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-can-r03.dtsi"
#include "sm7150-sec-a71-can-pinctrl-r04.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-can-r04.dtsi" |
||||
#include "sm7150-sec-a71-can-pinctrl-r05.dtsi" |
||||
|
||||
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
|
||||
|
||||
}; |
||||
|
||||
|
||||
|
||||
@ -1,94 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-can-r05.dtsi" |
||||
#include "sm7150-sec-a71-can-pinctrl-r06.dtsi" |
||||
//#include "../drivers/sm7150-camera-sensor-a71-r01.dtsi" |
||||
|
||||
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
/delete-node/ &i2c_17; |
||||
|
||||
&soc { |
||||
i2c_14: 12c@14 { |
||||
status = "ok"; |
||||
|
||||
cell-index = <14>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 101 0 /*sda*/ |
||||
&tlmm 102 0 /*scl*/ |
||||
>; |
||||
|
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&s2mu106_fg_active>; |
||||
}; |
||||
|
||||
i2c_17: i2c@17 { /* SW I2C */ |
||||
status = "ok"; |
||||
|
||||
cell-index = <17>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 25 0 /* sda */ |
||||
&tlmm 26 0 /* scl */ |
||||
>; |
||||
#i2c-gpio,delay-us = <2>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
pinctrl-names = "default", "sleep"; |
||||
pinctrl-0 = <&grip_i2c_active>; |
||||
pinctrl-1 = <&grip_i2c_suspend>; |
||||
|
||||
a96t3x6@21 { |
||||
compatible = "a96t3x6"; |
||||
reg = <0x21>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&grip_int_active>; |
||||
pinctrl-1 = <&grip_int_suspend>; |
||||
|
||||
interrupt-parent = <&spmi_bus>; |
||||
interrupts = <0x4 0xc4 0 IRQ_TYPE_EDGE_FALLING>; |
||||
|
||||
a96t3x6,irq_gpio = <&pm6150l_gpios 5 GPIO_ACTIVE_LOW>; |
||||
a96t3x6,dvdd_vreg_name = "pm6150l_l11"; |
||||
a96t3x6,fw_path = "abov/a96t356_a71_can.bin"; |
||||
a96t3x6,firmup_cmd = <0x3b>; |
||||
}; |
||||
|
||||
a96t3x6_sub@20 { |
||||
compatible = "a96t3x6_sub"; |
||||
reg = <0x20>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&grip_sub_int_active>; |
||||
pinctrl-1 = <&grip_sub_int_suspend>; |
||||
|
||||
interrupt-parent = <&spmi_bus>; |
||||
interrupts = <0x4 0xc4 0 IRQ_TYPE_EDGE_FALLING>; |
||||
|
||||
a96t3x6,irq_gpio = <&pm6150l_gpios 6 GPIO_ACTIVE_LOW>; |
||||
a96t3x6,dvdd_vreg_name = "pm6150_l16"; |
||||
a96t3x6,fw_path = "abov/a96t356_a71_sub_can.bin"; |
||||
a96t3x6,firmup_cmd = <0x3b>; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -1,48 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
|
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
usbpd_irq: usbpd_irq { |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
if_pmic_irq: if_pmic_irq { |
||||
mux { |
||||
pins = "gpio68"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio68"; |
||||
drive-strength = <2>; /* 16 mA */ |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
|
||||
}; |
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,26 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
@ -1,53 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
/* s2mu106_fg i2c */ |
||||
s2mu106_fg_i2c: s2mu106_fg_i2c { |
||||
s2mu106_fg_active: s2mu106_fg_active { |
||||
mux { |
||||
pins = "gpio102", "gpio101"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio102", "gpio101"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
dc_irq_default: dc_irq_default { |
||||
config { |
||||
pins = "gpio57"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -1,36 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-eur-ldu-pinctrl-r00.dtsi" |
||||
|
||||
#include "../common/sm7150-sec-a71-common.dtsi" |
||||
// #include "sm6150-sec-a70q-input-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-pm-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-battery-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-eif-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-fingerprint_00.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-nfc-r00.dtsi" |
||||
#include "../drivers/sm7150-camera-sensor-a71-r01.dtsi" |
||||
//#include "../drivers/sm7150-sec-a71-display-r00.dtsi" |
||||
|
||||
|
||||
&soc { |
||||
sec_thermistor@0 { |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
sdm_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-ldu-r00.dtsi"
#include "sm7150-sec-a71-eur-ldu-pinctrl-r01.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-ldu-r01.dtsi"
#include "sm7150-sec-a71-eur-ldu-pinctrl-r02.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-ldu-r02.dtsi"
#include "sm7150-sec-a71-eur-ldu-pinctrl-r03.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-ldu-r03.dtsi"
#include "sm7150-sec-a71-eur-ldu-pinctrl-r04.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,18 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-ldu-r04.dtsi" |
||||
#include "sm7150-sec-a71-eur-ldu-pinctrl-r05.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
|
||||
}; |
||||
@ -1,46 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-eur-ldu-r05.dtsi" |
||||
#include "sm7150-sec-a71-eur-ldu-pinctrl-r06.dtsi" |
||||
//#include "../drivers/sm7150-camera-sensor-a71-r01.dtsi" |
||||
|
||||
//#include "../drivers/sm7150-sec-a71-display-r00.dtsi" |
||||
|
||||
|
||||
&soc { |
||||
i2c_14: 12c@14 { |
||||
status = "ok"; |
||||
|
||||
cell-index = <14>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 101 0 /*sda*/ |
||||
&tlmm 102 0 /*scl*/ |
||||
>; |
||||
|
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&s2mu106_fg_active>; |
||||
}; |
||||
}; |
||||
|
||||
@ -1,46 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
usbpd_irq: usbpd_irq { |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
if_pmic_irq: if_pmic_irq { |
||||
mux { |
||||
pins = "gpio68"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio68"; |
||||
drive-strength = <2>; /* 16 mA */ |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
|
||||
}; |
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,26 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
@ -1,54 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
/* s2mu106_fg i2c */ |
||||
s2mu106_fg_i2c: s2mu106_fg_i2c { |
||||
s2mu106_fg_active: s2mu106_fg_active { |
||||
mux { |
||||
pins = "gpio102", "gpio101"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio102", "gpio101"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
dc_irq_default: dc_irq_default { |
||||
config { |
||||
pins = "gpio57"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
@ -1,27 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,36 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-eur-pinctrl-r00.dtsi" |
||||
|
||||
#include "../common/sm7150-sec-a71-common.dtsi" |
||||
// #include "sm6150-sec-a70q-input-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-pm-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-battery-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-eif-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-fingerprint_00.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-nfc-r00.dtsi" |
||||
#include "../drivers/sm7150-camera-sensor-a71-r00.dtsi" |
||||
//#include "../drivers/sm7150-sec-a71-display-r00.dtsi" |
||||
|
||||
|
||||
&soc { |
||||
sec_thermistor@0 { |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
sdm_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-r00.dtsi"
#include "sm7150-sec-a71-eur-pinctrl-r01.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-r01.dtsi"
#include "sm7150-sec-a71-eur-pinctrl-r02.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-r02.dtsi"
#include "sm7150-sec-a71-eur-pinctrl-r03.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,16 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-r03.dtsi"
#include "sm7150-sec-a71-eur-pinctrl-r04.dtsi"
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,20 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-eur-r04.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r05.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,86 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
#include "sm7150-sec-a71-eur-pinctrl-r00.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r01.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r02.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r03.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r04.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r05.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r06.dtsi" |
||||
|
||||
#include "../common/sm7150-sec-a71-common.dtsi" |
||||
// #include "sm6150-sec-a70q-input-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-pm-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-battery-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-eif-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-fingerprint_00.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-nfc-r00.dtsi" |
||||
#include "../drivers/sm7150-camera-sensor-a71-r01.dtsi" |
||||
//#include "../drivers/sm7150-sec-a71-display-r00.dtsi" |
||||
|
||||
|
||||
&soc { |
||||
sec_thermistor@0 { |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
|
||||
i2c_14: 12c@14 { |
||||
status = "ok"; |
||||
|
||||
cell-index = <14>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 101 0 /*sda*/ |
||||
&tlmm 102 0 /*scl*/ |
||||
>; |
||||
|
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&s2mu106_fg_active>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
sdm_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
|
||||
&flash_led { |
||||
reg = <0x74>; |
||||
compatible = "qcom,s2mu106-fled"; |
||||
enable = <1 1>; |
||||
flash-gpio = <&tlmm 22 0>; |
||||
torch-gpio = <&tlmm 24 0>; |
||||
pinctrl-names = "fled_default", "fled_suspend"; |
||||
pinctrl-0 = <&cam_flash_active &cam_torch_active>; |
||||
pinctrl-1 = <&cam_flash_suspend &cam_torch_suspend>; |
||||
flash_current = <1400>; |
||||
preflash_current = <200>; |
||||
torch_current = <300>; |
||||
movie_current = <200>; |
||||
factory_current = <300>; |
||||
flashlight_current = <25 75 100 150 200>; |
||||
status = "okay"; |
||||
}; |
||||
@ -1,32 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
#include "sm7150-sec-a71-eur-r06.dtsi" |
||||
#include "sm7150-sec-a71-eur-pinctrl-r07.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,48 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
|
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tlmm { |
||||
usbpd_irq: usbpd_irq { |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
if_pmic_irq: if_pmic_irq { |
||||
mux { |
||||
pins = "gpio68"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio68"; |
||||
drive-strength = <2>; /* 16 mA */ |
||||
bias-disable; |
||||
input-enable; |
||||
}; |
||||
}; |
||||
|
||||
|
||||
}; |
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
|
||||
* |
||||
|
||||
* This program is free software; you can redistribute it and/or modify |
||||
|
||||
* it under the terms of the GNU General Public License version 2 and |
||||
|
||||
* only version 2 as published by the Free Software Foundation. |
||||
|
||||
* |
||||
|
||||
* This program is distributed in the hope that it will be useful, |
||||
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
||||
* GNU General Public License for more details. |
||||
|
||||
*/ |
||||
|
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
|
||||
@ -1,36 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "sm7150-sec-a71-swa-pinctrl-r00.dtsi" |
||||
|
||||
#include "../common/sm7150-sec-a71-common.dtsi" |
||||
// #include "sm6150-sec-a70q-input-common.dtsi" |
||||
#include "../common/sm7150-sec-a71-pm-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-eif-r00.dtsi" |
||||
#include "../common/sm7150-sec-a71-battery-common.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-fingerprint_00.dtsi" |
||||
#include "../drivers/sm7150-sec-a71-nfc-r00.dtsi" |
||||
#include "../drivers/sm7150-camera-sensor-a71-r00.dtsi" |
||||
//#include "../drivers/sm7150-sec-a71-display-r00.dtsi" |
||||
|
||||
|
||||
&soc { |
||||
sec_thermistor@0 { |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
sdm_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
}; |
||||
}; |
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-swa-r00.dtsi"
#include "sm7150-sec-a71-swa-pinctrl-r01.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-swa-r01.dtsi"
#include "sm7150-sec-a71-swa-pinctrl-r02.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
@ -1,17 +0,0 @@ |
||||
/* Copyright (c) 2019, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
#include "sm7150-sec-a71-swa-r02.dtsi"
#include "sm7150-sec-a71-swa-pinctrl-r03.dtsi"
//#include "../drivers/sm7150-sec-a71-display-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
@ -1,170 +0,0 @@ |
||||
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include <dt-bindings/input/input.h> |
||||
#include <dt-bindings/msm/msm-bus-ids.h> |
||||
|
||||
&pm6150l_l7 { |
||||
regulator-min-microvolt = <3000000>; |
||||
regulator-max-microvolt = <3000000>; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
&tlmm { |
||||
tsp_int: tsp_int { |
||||
mux { |
||||
pins = "gpio9"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio9"; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
qupv3_se7_i2c_pins_tsp: qupv3_se7_i2c_pins_tsp { |
||||
qupv3_se7_i2c_active_tsp: qupv3_se7_i2c_active_tsp { |
||||
mux { |
||||
pins = "gpio6", "gpio7"; |
||||
function = "qup11"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio6", "gpio7"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
qupv3_se7_i2c_sleep_tsp: qupv3_se7_i2c_sleep_tsp { |
||||
mux { |
||||
pins = "gpio6", "gpio7"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio6", "gpio7"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&qupv3_se7_i2c { |
||||
status = "ok"; |
||||
pinctrl-names = "default", "sleep"; |
||||
pinctrl-0 = <&qupv3_se7_i2c_active_tsp>; |
||||
pinctrl-1 = <&qupv3_se7_i2c_sleep_tsp>; |
||||
|
||||
synaptics_tcm@20 { |
||||
status = "disabled"; |
||||
}; |
||||
atmel_mxt_ts@4a { |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
tsp_zt: touchscreen@20 { |
||||
status = "disabled"; |
||||
compatible = "zinitix,zt_ts_device"; |
||||
reg = <0x20>; |
||||
pinctrl-names = "on_state", "off_state"; |
||||
pinctrl-0 = <&tsp_int>; |
||||
pinctrl-1 = <&tsp_int>; |
||||
avdd-supply = <&pm6150l_l7>; |
||||
zinitix,gpio_ldo_en; |
||||
zinitix,irq_type = <0x2008>; |
||||
zinitix,x_resolution = <1080>; |
||||
zinitix,y_resolution = <2400>; |
||||
zinitix,page_size = <0x80>; |
||||
zinitix,irq_gpio = <&tlmm 9 0x2008>; |
||||
zinitix,chip_name = "ZT7650"; |
||||
zinitix,firmware_name = "tsp_zinitix/zt7650_a52.bin"; |
||||
zinitix,spay; |
||||
zinitix,aod; |
||||
zinitix,aot; |
||||
zinitix,mis_cal_check; |
||||
support_ear_detect_mode; |
||||
support_dex_mode; |
||||
zinitix,bringup = <0>; |
||||
// zinitix,tclm_level = <0x2>; |
||||
// zinitix,afe_base = <0xe>; |
||||
zinitix,ss_touch_num = <0x1>; |
||||
}; |
||||
|
||||
tsp_stm: touchscreen@49 { |
||||
status = "disabled"; |
||||
compatible = "stm,fts_touch"; |
||||
reg = <0x49>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&tsp_int>; |
||||
dvdd-supply = <&pm6150_l10>; |
||||
avdd-supply = <&pm6150l_l7>; |
||||
stm,irq_gpio = <&tlmm 9 0x2008>; |
||||
stm,max_coords = <4095 4095>; |
||||
stm,firmware_name = "tsp_stm/fts5cu56a_a52.bin"; |
||||
stm,tclm_level = <2>; |
||||
stm,afe_base = <0x14>; |
||||
stm,bringup = <0>; |
||||
stm,support_fod; |
||||
stm,enable_settings_aot; |
||||
support_ear_detect; |
||||
support_mis_calibration_test; |
||||
support_dex_mode; |
||||
support_open_short_test; |
||||
support_sram_test; |
||||
// support_hall_ic; |
||||
// support_flex_mode; |
||||
stm,ss_touch_num = <1>; |
||||
// stm,hw_i2c_reset; |
||||
}; |
||||
}; |
||||
|
||||
/delete-node/&key_vol_up_default; |
||||
&pm6150l_gpios { |
||||
key_vol_up { |
||||
key_vol_up_default: key_vol_up_default { |
||||
pins = "gpio8"; |
||||
function = "normal"; |
||||
input-enable; |
||||
bias-pull-up; |
||||
power-source = <0>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
/delete-node/&gpio_key; |
||||
&gpio_key { |
||||
status = "okay"; |
||||
compatible = "gpio-keys"; |
||||
input-name = "gpio-keys"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&key_vol_up_default>; |
||||
|
||||
vol_up { |
||||
label = "volume_up"; |
||||
gpios = <&pm6150l_gpios 8 0x1>; |
||||
linux,input-type = <1>; |
||||
linux,code = <KEY_VOLUMEUP>; |
||||
debounce-interval = <15>; |
||||
}; |
||||
}; |
||||
|
||||
&soc { |
||||
ss_touch { |
||||
compatible = "samsung,ss_touch"; |
||||
ss_touch,numbers = <1>; |
||||
}; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a52q-r04.dtsi" |
||||
#include "drivers/atoll-sec-a52q-battery-r04.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A52Q LTN PROJECT REV02 (board-id,04)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 4>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a52q-r05.dtsi" |
||||
#include "drivers/atoll-sec-a52q-battery-r04.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A52Q LTN PROJECT REV03 (board-id,05)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 5>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a52q-r06.dtsi" |
||||
#include "drivers/atoll-sec-a52q-battery-r04.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A52Q LTN PROJECT REV03A (board-id,06)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 6>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,687 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "drivers/atoll-sec-a52q-audio-pinctrl-common.dtsi" |
||||
|
||||
&tlmm { |
||||
grip_i2c { |
||||
grip_i2c_active: grip_i2c_active { |
||||
grip_i2c_active { |
||||
pins = "gpio51", "gpio52"; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
grip_i2c_suspend: grip_i2c_suspend { |
||||
grip_i2c_suspend { |
||||
pins = "gpio51", "gpio52"; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
s2mpb03_i2c_sda_default: s2mpb03_i2c_sda_default { |
||||
mux { |
||||
pins = "gpio25"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio25"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
s2mpb03_i2c_scl_default: s2mpb03_i2c_scl_default { |
||||
mux { |
||||
pins = "gpio26"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio26"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk0_active: cam_sensor_mclk0_active { |
||||
/* Main Rear MCLK */ |
||||
mux { |
||||
pins = "gpio13"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio13"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend { |
||||
/* Main Rear MCLK */ |
||||
mux { |
||||
pins = "gpio13"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio13"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
output-low; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk1_active: cam_sensor_mclk1_active { |
||||
/* FRONT MCLK */ |
||||
mux { |
||||
pins = "gpio23"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio23"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend { |
||||
/* FRONT MCLK */ |
||||
mux { |
||||
pins = "gpio23"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio23"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
output-low; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk2_active: cam_sensor_mclk2_active { |
||||
/* Bokeh Cam MCLK */ |
||||
mux { |
||||
pins = "gpio14"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio14"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend { |
||||
/* Bokeh Cam MCLK */ |
||||
mux { |
||||
pins = "gpio14"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio14"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
output-low; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk3_active: cam_sensor_mclk3_active { |
||||
/* UW Cam MCLK */ |
||||
mux { |
||||
pins = "gpio15"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio15"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend { |
||||
/* UW Cam MCLK */ |
||||
mux { |
||||
pins = "gpio15"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio15"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
output-low; |
||||
|
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk4_active: cam_sensor_mclk4_active { |
||||
/* Macro Cam MCLK */ |
||||
mux { |
||||
pins = "gpio16"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio16"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk4_suspend: cam_sensor_mclk4_suspend { |
||||
/* Macro Cam MCLK */ |
||||
mux { |
||||
pins = "gpio16"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio16"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <4>; /* 4 MA */ |
||||
output-low; |
||||
|
||||
}; |
||||
}; |
||||
|
||||
rcam1_sensor_reset_active: rcam1_sensor_reset_active { |
||||
/* Main Rear reset */ |
||||
mux { |
||||
pins = "gpio30"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio30"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam1_sensor_reset_suspend: rcam1_sensor_reset_suspend { |
||||
/* Main Rear reset */ |
||||
mux { |
||||
pins = "gpio30"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio30"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
front_sensor_reset_active: front_sensor_reset_active { |
||||
/* FRONT RESET */ |
||||
mux { |
||||
pins = "gpio21"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio21"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
front_sensor_reset_suspend: front_sensor_reset_suspend { |
||||
/* FRONT RESET */ |
||||
mux { |
||||
pins = "gpio21"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio21"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam3_sensor_reset_active: rcam3_sensor_reset_active { |
||||
/* UW Cam RESET */ |
||||
mux { |
||||
pins = "gpio29"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio29"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam3_sensor_reset_suspend: rcam3_sensor_reset_suspend { |
||||
/* UW Cam RESET */ |
||||
mux { |
||||
pins = "gpio29"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio29"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_reset_active: rcam2_sensor_reset_active { |
||||
/* Bokeh Cam RESET */ |
||||
mux { |
||||
pins = "gpio42"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio42"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_reset_suspend: rcam2_sensor_reset_suspend { |
||||
/* Bokeh Cam RESET */ |
||||
mux { |
||||
pins = "gpio42"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio42"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_reset_active: rcam4_sensor_reset_active { |
||||
/* Macro Cam RESET */ |
||||
mux { |
||||
pins = "gpio24"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio24"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_reset_suspend: rcam4_sensor_reset_suspend { |
||||
/* Macro Cam RESET */ |
||||
mux { |
||||
pins = "gpio24"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio24"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam1_sensor_vana_active: rcam1_sensor_vana_active { |
||||
/* Rear VANA */ |
||||
mux { |
||||
pins = "gpio63"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio63"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam1_sensor_vana_suspend: rcam1_sensor_vana_suspend { |
||||
/* Rear VANA */ |
||||
mux { |
||||
pins = "gpio63"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio63"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_vana_active: rcam2_sensor_vana_active { |
||||
/* Bokeh VANA */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_vana_suspend: rcam2_sensor_vana_suspend { |
||||
/* Bokeh VANA */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam3_sensor_vana_active: rcam3_sensor_vana_active { |
||||
/* UW VANA */ |
||||
mux { |
||||
pins = "gpio65"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio65"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam3_sensor_vana_suspend: rcam3_sensor_vana_suspend { |
||||
/* UW VANA */ |
||||
mux { |
||||
pins = "gpio65"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio65"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vana_active: rcam4_sensor_vana_active { |
||||
/* Macro VANA */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vana_suspend: rcam4_sensor_vana_suspend { |
||||
/* Macro VANA */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_mipi_sel_active: cam_mipi_sel_active { |
||||
/* MIPI SEL */ |
||||
mux { |
||||
pins = "gpio66"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio66"; |
||||
bias-disable; |
||||
output-high; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
cam_mipi_sel_suspend: cam_mipi_sel_suspend { |
||||
/* MIPI SEL */ |
||||
mux { |
||||
pins = "gpio66"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio66"; |
||||
bias-pull-down; |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_vdig_active: rcam2_sensor_vdig_active { |
||||
/* Bokeh VDIG */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_vdig_suspend: rcam2_sensor_vdig_suspend { |
||||
/* Bokeh VDIG */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vdig_active: rcam4_sensor_vdig_active { |
||||
/* Macro VDIG */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vdig_suspend: rcam4_sensor_vdig_suspend { |
||||
/* Macro VDIG */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
if_pmic_i2c_pins: if_pmic_i2c_pins { |
||||
if_pmic_i2c_sleep: if_pmic_i2c_sleep { |
||||
mux { |
||||
pins = "gpio115", "gpio116"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio115", "gpio116"; |
||||
drive-strength = <2>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
usbpd_i2c_pins: usbpd_i2c_pins { |
||||
usbpd_i2c_sleep: usbpd_i2c_sleep { |
||||
mux { |
||||
pins = "gpio53", "gpio54"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio53", "gpio54"; |
||||
drive-strength = <2>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
mcu_reset_active: mcu_reset_active { |
||||
/* MCU Reset */ |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
bias-disable; /* No PULL */ |
||||
/*output-high;*/ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
mcu_reset_suspend: mcu_reset_suspend { |
||||
/* MCU Reset */ |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
mcu_clk_active: mcu_clk_active { |
||||
/* MCU CLK */ |
||||
mux { |
||||
pins = "gpio43"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio43"; |
||||
bias-disable; /* No PULL */ |
||||
//output-high; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
mcu_clk_suspend: mcu_clk_suspend { |
||||
/* MCU Reset */ |
||||
mux { |
||||
pins = "gpio43"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio43"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
torch_en_active: torch_en_active { |
||||
mux { |
||||
pins = "gpio67" ,"gpio22"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio67" ,"gpio22"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
output-high; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
torch_en_suspend: torch_en_suspend { |
||||
mux { |
||||
pins = "gpio67" ,"gpio22"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio67" ,"gpio22"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
&pm6150l_gpios { |
||||
grip_int_active: grip_int_active { |
||||
pins = "gpio5"; |
||||
function = "normal"; |
||||
power-source = <0>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
grip_int_suspend: grip_int_suspend { |
||||
pins = "gpio5"; |
||||
function = "normal"; |
||||
power-source = <0>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* SPI : NFC_ESE_MISO */ |
||||
3 /* LAGOON : NFC_ESE_CS_N */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
10 /* LAGOON : DISP_TE */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* HW-REVIEW : MCU_BOOT0_SWCLK */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
32 /* RST_N : MCU_nRST */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
36 /* LAGOON : NFC_FIRM */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
38 /* HW-REVIEW : BT_UART_CTS */ |
||||
39 /* HW-REVIEW : BT_UART_RTS */ |
||||
42 /* I2C : CC_SDA_1P8 */ |
||||
43 /* I2C : CC_SCL_1P8 */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
49 /* LAGOON : BT_FM_SB_CLK */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CAM_PMIC_I2C_SDA_1P8 */ |
||||
56 /* LAGOON : MST_DATA_B */ |
||||
57 /* EN : MST_LDO_EN */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
66 /* LAGOON : CAM_SEL */ |
||||
67 /* EN : BTP_LDO_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
69 /* LAGOON : T_FLASH_DET */ |
||||
72 /* EN : FM_LAN_EN */ |
||||
74 /* EN : RCAM4_LDO_EN */ |
||||
78 /* NC : NC */ |
||||
84 /* NC : NC */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
93 /* UNUSED : HALL_INT1 */ |
||||
95 /* NC : NC */ |
||||
98 /* NC : NC */ |
||||
109 /* LAGOON : CP_WLAN_COEX_RXD */ |
||||
114 /* LAGOON : AP_USB_BOOT_POL_SEL */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
117 /* NC : NC */ |
||||
118 /* EN : NFC_ESE_EN */ |
||||
>; |
||||
}; |
||||
@ -1,73 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* SPI : NFC_ESE_MISO */ |
||||
3 /* LAGOON : NFC_ESE_CS_N */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
10 /* LAGOON : DISP_TE */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
32 /* RST_N : MCU_nRST */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
36 /* LAGOON : NFC_FIRM */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
38 /* HW-REVIEW : BT_UART_CTS */ |
||||
39 /* HW-REVIEW : BT_UART_RTS */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
43 /* HW-REVIEW : MCU_BOOT0_SWCLK */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
49 /* LAGOON : BT_FM_SB_CLK */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
56 /* LAGOON : MST_DATA_B */ |
||||
57 /* EN : MST_LDO_EN */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
66 /* LAGOON : CAM_SEL */ |
||||
67 /* EN : BTP_LDO_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
69 /* LAGOON : T_FLASH_DET */ |
||||
72 /* EN : FM_LAN_EN */ |
||||
74 /* EN : RCAM4_LDO_EN */ |
||||
78 /* NC : NC */ |
||||
84 /* NC : NC */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
90 /* HW-REVIEW : SPK_AMP_INT */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
93 /* UNUSED : HALL_INT1 */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
95 /* HW-REVIEW : FAST_BOOT_SEL0 */ |
||||
98 /* HW-REVIEW : FAST_BOOT_SEL3 */ |
||||
109 /* LAGOON : CP_WLAN_COEX_RXD */ |
||||
114 /* LAGOON : AP_USB_BOOT_POL_SEL */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
117 /* NC : NC */ |
||||
118 /* EN : NFC_ESE_EN */ |
||||
>; |
||||
}; |
||||
@ -1,99 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&rcam4_sensor_vana_active { |
||||
/* Macro VANA */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
&rcam4_sensor_vana_suspend { |
||||
/* Macro VANA */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* SPI : NFC_ESE_MISO */ |
||||
3 /* LAGOON : NFC_ESE_CS_N */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
10 /* LAGOON : DISP_TE */ |
||||
11 /* LCD/HW-REVIEW : EL_ON1_DET */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
32 /* RST_N : MCU_nRST */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
36 /* LAGOON : NFC_FIRM */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
38 /* HW-REVIEW : BT_UART_CTS */ |
||||
39 /* HW-REVIEW : BT_UART_RTS */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
43 /* HW-REVIEW : MCU_BOOT0_SWCLK */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
49 /* LAGOON : BT_FM_SB_CLK */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
57 /* EN : HAPTIC_EN */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_RCAM4_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
66 /* LAGOON : CAM_SEL */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
69 /* LAGOON : T_FLASH_DET */ |
||||
74 /* NC : NC */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
90 /* HW-REVIEW : SPK_AMP_INT */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
93 /* UNUSED : HALL_INT1 */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
95 /* HW-REVIEW : FAST_BOOT_SEL0 */ |
||||
98 /* HW-REVIEW : FAST_BOOT_SEL3 */ |
||||
107 /* HW-REVIEW : FAST_BOOT_SEL2 */ |
||||
109 /* LAGOON : CP_WLAN_COEX_RXD */ |
||||
114 /* LAGOON : AP_USB_BOOT_POL_SEL */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* EN : NFC_ESE_EN */ |
||||
>; |
||||
}; |
||||
@ -1,74 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* SPI : NFC_ESE_MISO */ |
||||
3 /* LAGOON : NFC_ESE_CS_N */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
10 /* LAGOON : DISP_TE */ |
||||
11 /* LCD/HW-REVIEW : EL_ON1_DET */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
32 /* RST_N : MCU_nRST */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
36 /* LAGOON : NFC_FIRM */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
38 /* HW-REVIEW : BT_UART_CTS */ |
||||
39 /* HW-REVIEW : BT_UART_RTS */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
43 /* HW-REVIEW : MCU_BOOT0_SWCLK */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
49 /* LAGOON : BT_FM_SB_CLK */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* NC : NC */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_RCAM4_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
66 /* LAGOON : CAM_SEL */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
69 /* LAGOON : T_FLASH_DET */ |
||||
74 /* NC : NC */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
90 /* HW-REVIEW : SPK_AMP_INT */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
93 /* UNUSED : HALL_INT1 */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
95 /* HW-REVIEW : FAST_BOOT_SEL0 */ |
||||
98 /* HW-REVIEW : FAST_BOOT_SEL3 */ |
||||
107 /* HW-REVIEW : FAST_BOOT_SEL2 */ |
||||
109 /* LAGOON : CP_WLAN_COEX_RXD */ |
||||
114 /* LAGOON : AP_USB_BOOT_POL_SEL */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* EN : NFC_ESE_EN */ |
||||
>; |
||||
}; |
||||
@ -1,74 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* NC : NC */ |
||||
3 /* NC : NC */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
10 /* LAGOON : DISP_TE */ |
||||
11 /* LCD/HW-REVIEW : EL_ON1_DET */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
32 /* RST_N : MCU_nRST */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
36 /* LAGOON : NFC_FIRM */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
38 /* HW-REVIEW : BT_UART_CTS */ |
||||
39 /* HW-REVIEW : BT_UART_RTS */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
43 /* HW-REVIEW : MCU_BOOT0_SWCLK */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
49 /* LAGOON : BT_FM_SB_CLK */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* NC : NC */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_RCAM4_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
66 /* LAGOON : CAM_SEL */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
69 /* LAGOON : T_FLASH_DET */ |
||||
74 /* NC : NC */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
90 /* HW-REVIEW : SPK_AMP_INT */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
93 /* UNUSED : HALL_INT1 */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
95 /* HW-REVIEW : FAST_BOOT_SEL0 */ |
||||
98 /* HW-REVIEW : FAST_BOOT_SEL3 */ |
||||
107 /* HW-REVIEW : FAST_BOOT_SEL2 */ |
||||
109 /* LAGOON : CP_WLAN_COEX_RXD */ |
||||
114 /* LAGOON : AP_USB_BOOT_POL_SEL */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* NC : NC */ |
||||
>; |
||||
}; |
||||
@ -1,74 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* NC : NC */ |
||||
3 /* NC : NC */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
10 /* LAGOON : DISP_TE */ |
||||
11 /* LCD/HW-REVIEW : EL_ON1_DET */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
32 /* RST_N : MCU_nRST */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
36 /* LAGOON : NFC_FIRM */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
38 /* HW-REVIEW : BT_UART_CTS */ |
||||
39 /* HW-REVIEW : BT_UART_RTS */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
43 /* HW-REVIEW : MCU_BOOT0_SWCLK */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
49 /* LAGOON : BT_FM_SB_CLK */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* EN : MOT_EN */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_RCAM4_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
66 /* LAGOON : CAM_SEL */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
69 /* LAGOON : T_FLASH_DET */ |
||||
74 /* NC : NC */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
90 /* HW-REVIEW : SPK_AMP_INT */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
93 /* UNUSED : HALL_INT1 */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
95 /* HW-REVIEW : FAST_BOOT_SEL0 */ |
||||
98 /* HW-REVIEW : FAST_BOOT_SEL3 */ |
||||
107 /* HW-REVIEW : FAST_BOOT_SEL2 */ |
||||
109 /* LAGOON : CP_WLAN_COEX_RXD */ |
||||
114 /* LAGOON : AP_USB_BOOT_POL_SEL */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* NC : NC */ |
||||
>; |
||||
}; |
||||
@ -1,169 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-pm-common.dtsi" |
||||
|
||||
&soc { |
||||
/* AP Thermistor table */ |
||||
sec_thermistor@0 { |
||||
compatible = "samsung,sec-ap-thermistor"; |
||||
status = "okay"; |
||||
io-channels = <&pm6150_vadc ADC_AMUX_THM2_PU2>; |
||||
io-channel-names = "ap_therm"; |
||||
adc_array = <1700 2190 2576 3046 3583 4240 4993 |
||||
5876 6940 8121 9339 10812 12445 |
||||
14086 15773 17384 19110 20676 22090 23374 24495 25465 26282>; |
||||
temp_array = <900 850 800 750 700 650 600 |
||||
550 500 450 400 350 300 |
||||
250 200 150 100 50 0 (-50) (-100) (-150) (-200)>; |
||||
}; |
||||
|
||||
/* PA Thermistor table */ |
||||
sec_thermistor@1 { |
||||
compatible = "samsung,sec-pa-thermistor"; |
||||
status = "okay"; |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM2_PU2>; |
||||
io-channel-names = "pa_therm"; |
||||
adc_array = <1800 2239 2631 3097 3640 4290 5056 |
||||
5949 7006 8191 9423 10888 12510 |
||||
14166 15850 17469 19165 20736 22147 23446 24559 25515 26328>; |
||||
temp_array = <900 850 800 750 700 650 600 |
||||
550 500 450 400 350 300 |
||||
250 200 150 100 50 0 (-50) (-100) (-150) (-200)>; |
||||
}; |
||||
|
||||
/* WiFi Thermistor table */ |
||||
sec_thermistor@2 { |
||||
compatible = "samsung,sec-wf-thermistor"; |
||||
status = "okay"; |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
io-channel-names = "wf_therm"; |
||||
adc_array = <1800 2261 2662 3125 3669 4308 5088 |
||||
5990 7041 8225 9459 10915 12532 |
||||
14188 15881 17502 19180 20741 22156 23459 24569 25524 26336>; |
||||
temp_array = <900 850 800 750 700 650 600 |
||||
550 500 450 400 350 300 |
||||
250 200 150 100 50 0 (-50) (-100) (-150) (-200)>; |
||||
}; |
||||
|
||||
/* S2MPB03 Camera PMIC */ |
||||
i2c2: i2c@2 { |
||||
cell-index = <2>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 25 0 /* sda */ |
||||
&tlmm 26 0 /* scl */ |
||||
>; |
||||
#i2c-gpio,delay-us = <2>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&s2mpb03_i2c_sda_default &s2mpb03_i2c_scl_default>; |
||||
|
||||
/* S2MPB03 Camera PMIC */ |
||||
s2mpb03@56 { |
||||
compatible = "samsung,s2mpb03pmic"; |
||||
reg = <0x56>; |
||||
additional_reg_init; |
||||
|
||||
regulators { |
||||
s2mpb03_l1: s2mpb03-ldo1 { |
||||
regulator-name = "s2mpb03-ldo1"; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1050000>; |
||||
}; |
||||
|
||||
s2mpb03_l2: s2mpb03-ldo2 { |
||||
regulator-name = "s2mpb03-ldo2"; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1100000>; |
||||
}; |
||||
|
||||
s2mpb03_l3: s2mpb03-ldo3 { |
||||
regulator-name = "s2mpb03-ldo3"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
}; |
||||
|
||||
s2mpb03_l4: s2mpb03-ldo4 { |
||||
regulator-name = "s2mpb03-ldo4"; |
||||
regulator-min-microvolt = <1200000>; |
||||
regulator-max-microvolt = <1200000>; |
||||
}; |
||||
|
||||
s2mpb03_l5: s2mpb03-ldo5 { |
||||
regulator-name = "s2mpb03-ldo5"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2900000>; |
||||
}; |
||||
|
||||
s2mpb03_l6: s2mpb03-ldo6 { |
||||
regulator-name = "s2mpb03-ldo6"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2900000>; |
||||
}; |
||||
|
||||
s2mpb03_l7: s2mpb03-ldo7 { |
||||
regulator-name = "s2mpb03-ldo7"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2800000>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150_gpios { |
||||
interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc1 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc2 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc3 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc4 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc6 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc7 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc9 0 IRQ_TYPE_NONE>; |
||||
interrupt-names = "pm6150_gpio1", "pm6150_gpio2", |
||||
"pm6150_gpio3", "pm6150_gpio4", "pm6150_gpio5", |
||||
"pm6150_gpio7", "pm6150_gpio8", |
||||
"pm6150_gpio10"; |
||||
qcom,gpios-disallowed = <6 9>; |
||||
}; |
||||
|
||||
&pm6150_vadc { |
||||
ap_therm { |
||||
reg = <ADC_AMUX_THM2_PU2>; |
||||
label = "ap_therm"; |
||||
qcom,ratiometric; |
||||
qcom,hw-settle-time = <200>; |
||||
qcom,pre-scaling = <1 1>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
/delete-node/ pa_therm0; |
||||
|
||||
pa_therm { |
||||
reg = <ADC_AMUX_THM2_PU2>; |
||||
label = "pa_therm"; |
||||
qcom,ratiometric; |
||||
qcom,hw-settle-time = <200>; |
||||
qcom,pre-scaling = <1 1>; |
||||
}; |
||||
|
||||
wf_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
label = "wf_therm"; |
||||
qcom,ratiometric; |
||||
qcom,hw-settle-time = <200>; |
||||
qcom,pre-scaling = <1 1>; |
||||
}; |
||||
}; |
||||
@ -1,104 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "drivers/atoll-sec-a52q-audio-common.dtsi" |
||||
#include "atoll-sec-a52q-pinctrl-r00.dtsi" |
||||
#include "atoll-sec-a52q-pm-common.dtsi" |
||||
#include "atoll-sec-a52q-input-common.dtsi" |
||||
|
||||
#include "drivers/atoll-sec-a52q-display-r00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-usb-r00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-fingerprint_00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-camera-sensor-common.dtsi" |
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
||||
#include "drivers/atoll-sec-a52q-vibrator-r00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-nfc_r00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-hall-r00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-abc-r00.dtsi" |
||||
|
||||
&soc { |
||||
//Sensor Vdd |
||||
rpmh-regulator-ldoc8 { |
||||
compatible = "qcom,rpmh-vrm-regulator"; |
||||
mboxes = <&apps_rsc 0>; |
||||
qcom,resource-name = "ldoc8"; |
||||
qcom,regulator-type = "pmic5-ldo"; |
||||
qcom,supported-modes = |
||||
<RPMH_REGULATOR_MODE_LPM |
||||
RPMH_REGULATOR_MODE_HPM>; |
||||
qcom,mode-threshold-currents = <0 1>; |
||||
L8C: |
||||
pm6150l_l8: regulator-pm6150l-l8 { |
||||
regulator-name = "pm6150l_l8"; |
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
qcom,init-voltage = <1800000>; |
||||
regulator-always-on; |
||||
qcom,init-mode = |
||||
<RPMH_REGULATOR_MODE_LPM>; |
||||
}; |
||||
}; |
||||
|
||||
//Grip Sensor Vdd |
||||
rpmh-regulator-ldoa5 { |
||||
pm6150_l5: regulator-pm6150-l5 { |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
qcom,init-voltage = <3300000>; |
||||
regulator-always-on; |
||||
}; |
||||
}; |
||||
|
||||
i2c_17: i2c@17 { /* SW I2C */ |
||||
status = "ok"; |
||||
|
||||
cell-index = <17>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 51 0 /* sda */ |
||||
&tlmm 52 0 /* scl */ |
||||
>; |
||||
#i2c-gpio,delay-us = <2>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&grip_i2c_active>; |
||||
|
||||
sx9360-i2c@28 { |
||||
compatible = "sx9360"; |
||||
reg = <0x28>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&grip_int_active>; |
||||
|
||||
interrupt-parent = <&spmi_bus>; |
||||
interrupts = <0x4 0xc4 0 IRQ_TYPE_EDGE_FALLING>; |
||||
|
||||
sx9360,nirq-gpio = <&pm6150l_gpios 5 GPIO_ACTIVE_LOW>; |
||||
sx9360,reggnrlctrl2_reg = <0x32>; /* scanperiod: 102ms */ |
||||
sx9360,againfreq_reg = <0x38>; /* freq : 62.5 kHz, again : +/-5.25 pF */ |
||||
sx9360,refagainfreq_reg = <0x36>; /* reference phase again : 5.25 pF, sampling freq : 83.33 khz */ |
||||
sx9360,gainrawfilt_reg = <0x1A>; /* gain: x4, rawfilt : 1-1/4 */ |
||||
sx9360,refgainrawfilt_reg = <0x22>; /* reference phase gain: x8, rawfilt : 1-1/4 */ |
||||
sx9360,proxthresh_reg = <0x22>; /* threshold: 614 */ |
||||
sx9360,hyst_reg = <0x15>; /* hysteresis: small, closedeb: 2 samples, fardeb: 2 samples */ |
||||
sx9360,regproxctrl3_reg = <0x0C>; /* AVGPOSFILT: 1/256, AVGNEGFILT: 1/2 */ |
||||
sx9360,resolution_reg = <0x0F>; /* resolution: 1204 */ |
||||
sx9360,refresolution_reg = <0x0F>; /* reference phase resolution: 1204 */ |
||||
sx9360,hallic_cert_detect = <1>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&tsp_zt { |
||||
status = "okay"; |
||||
zinitix,bringup = <1>; |
||||
}; |
||||
@ -1,23 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a52q-r00.dtsi" |
||||
#include "atoll-sec-a52q-pinctrl-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
|
||||
&tsp_zt { |
||||
status = "okay"; |
||||
zinitix,bringup = <0>; |
||||
}; |
||||
@ -1,24 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a52q-r01.dtsi" |
||||
#include "atoll-sec-a52q-pinctrl-r02.dtsi" |
||||
#include "drivers/atoll-sec-a52q-camera-sensor-r02.dtsi" |
||||
|
||||
&vibrator { |
||||
samsung,vib_en = <&tlmm 57 0>; |
||||
}; |
||||
|
||||
&tsp_zt { |
||||
status = "okay"; |
||||
zinitix,bringup = <0>; |
||||
}; |
||||
@ -1,26 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a52q-r02.dtsi" |
||||
#include "atoll-sec-a52q-pinctrl-r04.dtsi" |
||||
|
||||
&vibrator { |
||||
/delete-property/ samsung,vib_en; |
||||
}; |
||||
|
||||
&tsp_zt { |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
&tsp_stm { |
||||
status = "okay"; |
||||
}; |
||||
@ -1,18 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a52q-r04.dtsi" |
||||
#include "atoll-sec-a52q-pinctrl-r05.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a52q-r05.dtsi" |
||||
#include "atoll-sec-a52q-pinctrl-r06.dtsi" |
||||
|
||||
/delete-node/ &vibrator; |
||||
|
||||
&soc { |
||||
msm_vibrator { |
||||
compatible = "vibrator"; |
||||
motor-vdd_type = <0>; /* 0: gpio, 1: pmic */ |
||||
motor-en = <&tlmm 57 0x0>; |
||||
samsung,vib_type = "COINDC"; |
||||
}; |
||||
}; |
||||
@ -1,28 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&reserved_memory { |
||||
camera_mem: camera_mem_region { |
||||
reg = <0x1 0x20000000 0x0 0x25800000>; |
||||
ion,recyclable; |
||||
}; |
||||
}; |
||||
|
||||
&soc { |
||||
qcom,ion { |
||||
qcom,ion-heap@30 { /* CAMERA HEAP */ |
||||
reg = <30>; |
||||
memory-region = <&camera_mem>; |
||||
qcom,ion-heap-type = "RBIN"; |
||||
}; |
||||
}; |
||||
}; |
||||
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
@ -1,139 +0,0 @@ |
||||
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include <dt-bindings/input/input.h> |
||||
#include <dt-bindings/msm/msm-bus-ids.h> |
||||
|
||||
&pm6150l_l7 { |
||||
regulator-min-microvolt = <3000000>; |
||||
regulator-max-microvolt = <3000000>; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
&tlmm { |
||||
tsp_int: tsp_int { |
||||
mux { |
||||
pins = "gpio9"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio9"; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&qupv3_se7_i2c { |
||||
status = "ok"; |
||||
synaptics_tcm@20 { |
||||
status = "disabled"; |
||||
}; |
||||
atmel_mxt_ts@4a { |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
tsp_zt: touchscreen@20 { |
||||
status = "ok"; |
||||
compatible = "zinitix,zt_ts_device"; |
||||
reg = <0x20>; |
||||
pinctrl-names = "on_state", "off_state"; |
||||
pinctrl-0 = <&tsp_int>; |
||||
pinctrl-1 = <&tsp_int>; |
||||
avdd-supply = <&pm6150l_l7>; |
||||
zinitix,gpio_ldo_en; |
||||
zinitix,irq_type = <0x2008>; |
||||
zinitix,x_resolution = <1080>; |
||||
zinitix,y_resolution = <2400>; |
||||
zinitix,page_size = <0x80>; |
||||
zinitix,irq_gpio = <&tlmm 9 0x2008>; |
||||
zinitix,chip_name = "ZT7650"; |
||||
zinitix,select_lcdid = <0x801000 0x801001 0x801002>; |
||||
zinitix,firmware_name = "tsp_zinitix/zt7650_a72.bin", "tsp_zinitix/zt7650_a72.bin", "tsp_zinitix/zt7650_a72_3rd.bin"; |
||||
zinitix,spay; |
||||
zinitix,aod; |
||||
zinitix,aot; |
||||
zinitix,mis_cal_check; |
||||
support_ear_detect_mode; |
||||
support_dex_mode; |
||||
zinitix,bringup = <0>; |
||||
// zinitix,tclm_level = <0x2>; |
||||
// zinitix,afe_base = <0xe>; |
||||
zinitix,ss_touch_num = <0x1>; |
||||
}; |
||||
|
||||
tsp_stm: touchscreen@49 { |
||||
status = "ok"; |
||||
compatible = "stm,fts_touch"; |
||||
reg = <0x49>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&tsp_int>; |
||||
/* dvdd-supply = <&pm6150_l10>; */ |
||||
avdd-supply = <&pm6150l_l7>; |
||||
stm,irq_gpio = <&tlmm 9 0x2008>; |
||||
stm,max_coords = <4095 4095>; |
||||
stm,firmware_name = "tsp_stm/fts5cu56a_a72.bin"; |
||||
stm,tclm_level = <2>; |
||||
stm,afe_base = <0x7>; |
||||
stm,bringup = <0>; |
||||
stm,support_fod; |
||||
stm,enable_settings_aot; |
||||
support_ear_detect; |
||||
support_mis_calibration_test; |
||||
support_dex_mode; |
||||
support_open_short_test; |
||||
support_sram_test; |
||||
// support_hall_ic; |
||||
// support_flex_mode; |
||||
stm,ss_touch_num = <1>; |
||||
// stm,hw_i2c_reset; |
||||
}; |
||||
}; |
||||
|
||||
/delete-node/&key_vol_up_default; |
||||
&pm6150l_gpios { |
||||
key_vol_up { |
||||
key_vol_up_default: key_vol_up_default { |
||||
pins = "gpio8"; |
||||
function = "normal"; |
||||
input-enable; |
||||
bias-pull-up; |
||||
power-source = <0>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
/delete-node/&gpio_key; |
||||
&gpio_key { |
||||
status = "okay"; |
||||
compatible = "gpio-keys"; |
||||
input-name = "gpio-keys"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&key_vol_up_default>; |
||||
|
||||
vol_up { |
||||
label = "volume_up"; |
||||
gpios = <&pm6150l_gpios 8 0x1>; |
||||
linux,input-type = <1>; |
||||
linux,code = <KEY_VOLUMEUP>; |
||||
debounce-interval = <15>; |
||||
}; |
||||
}; |
||||
|
||||
&soc { |
||||
ss_touch { |
||||
compatible = "samsung,ss_touch"; |
||||
ss_touch,numbers = <1>; |
||||
}; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a72q-r00.dtsi" |
||||
#include "drivers/atoll-sec-a72q-battery-common.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A72Q PROJECT (board-id,00)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 0>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a72q-r01.dtsi" |
||||
#include "drivers/atoll-sec-a72q-battery-common.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A72Q PROJECT REV00 (board-id,01)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 1>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a72q-r02.dtsi" |
||||
#include "./drivers/atoll-sec-a72q-battery-r02.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A72Q PROJECT REV01 (board-id,02)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 2>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a72q-r04.dtsi" |
||||
#include "./drivers/atoll-sec-a72q-battery-r02.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A72Q PROJECT REV02 (board-id,04)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 4>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
/plugin/; |
||||
|
||||
#include "atoll-sec-common.dtsi" |
||||
#include "atoll-sec-a72q-r05.dtsi" |
||||
#include "./drivers/atoll-sec-a72q-battery-r02.dtsi" |
||||
|
||||
/ { |
||||
model = "Samsung A72Q PROJECT REV03 (board-id,05)"; |
||||
compatible = "qcom,atoll-ab-idp", "qcom,atoll-ab", "qcom,idp"; |
||||
qcom,board-id = <34 5>; |
||||
dtbo-version = <0>; |
||||
}; |
||||
@ -1,653 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "drivers/atoll-sec-a72q-audio-pinctrl-common.dtsi" |
||||
|
||||
&tlmm { |
||||
grip_i2c { |
||||
grip_i2c_active: grip_i2c_active { |
||||
grip_i2c_active { |
||||
pins = "gpio51", "gpio52"; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
grip_i2c_suspend: grip_i2c_suspend { |
||||
grip_i2c_suspend { |
||||
pins = "gpio51", "gpio52"; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
s2mpb03_i2c_sda_default: s2mpb03_i2c_sda_default { |
||||
mux { |
||||
pins = "gpio25"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio25"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
s2mpb03_i2c_scl_default: s2mpb03_i2c_scl_default { |
||||
mux { |
||||
pins = "gpio26"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio26"; |
||||
drive-strength = <2>; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk0_active: cam_sensor_mclk0_active { |
||||
/* Main Rear MCLK */ |
||||
mux { |
||||
pins = "gpio13"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio13"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend { |
||||
/* Main Rear MCLK */ |
||||
mux { |
||||
pins = "gpio13"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio13"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
output-low; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk1_active: cam_sensor_mclk1_active { |
||||
/* FRONT MCLK */ |
||||
mux { |
||||
pins = "gpio23"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio23"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend { |
||||
/* FRONT MCLK */ |
||||
mux { |
||||
pins = "gpio23"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio23"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
output-low; |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk2_active: cam_sensor_mclk2_active { |
||||
/* Tele Cam MCLK */ |
||||
mux { |
||||
pins = "gpio14"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio14"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend { |
||||
/* Tele Cam MCLK */ |
||||
mux { |
||||
pins = "gpio14"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio14"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
output-low; |
||||
}; |
||||
}; |
||||
|
||||
|
||||
cam_sensor_mclk3_active: cam_sensor_mclk3_active { |
||||
/* UW Cam MCLK */ |
||||
mux { |
||||
pins = "gpio15"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio15"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend { |
||||
/* UW Cam MCLK */ |
||||
mux { |
||||
pins = "gpio15"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio15"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
output-low; |
||||
|
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk4_active: cam_sensor_mclk4_active { |
||||
/* Macro Cam MCLK */ |
||||
mux { |
||||
pins = "gpio16"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio16"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_sensor_mclk4_suspend: cam_sensor_mclk4_suspend { |
||||
/* Macro Cam MCLK */ |
||||
mux { |
||||
pins = "gpio16"; |
||||
function = "cam_mclk"; |
||||
}; |
||||
config { |
||||
pins = "gpio16"; |
||||
bias-pull-down; /* No PULL */ |
||||
drive-strength = <6>; /* 6 MA */ |
||||
output-low; |
||||
|
||||
}; |
||||
}; |
||||
|
||||
rcam1_sensor_reset_active: rcam1_sensor_reset_active { |
||||
/* Main Rear reset */ |
||||
mux { |
||||
pins = "gpio30"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio30"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam1_sensor_reset_suspend: rcam1_sensor_reset_suspend { |
||||
/* Main Rear reset */ |
||||
mux { |
||||
pins = "gpio30"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio30"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
front_sensor_reset_active: front_sensor_reset_active { |
||||
/* FRONT RESET */ |
||||
mux { |
||||
pins = "gpio21"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio21"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
front_sensor_reset_suspend: front_sensor_reset_suspend { |
||||
/* FRONT RESET */ |
||||
mux { |
||||
pins = "gpio21"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio21"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam3_sensor_reset_active: rcam3_sensor_reset_active { |
||||
/* UW Cam RESET */ |
||||
mux { |
||||
pins = "gpio29"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio29"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam3_sensor_reset_suspend: rcam3_sensor_reset_suspend { |
||||
/* UW Cam RESET */ |
||||
mux { |
||||
pins = "gpio29"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio29"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_reset_active: rcam2_sensor_reset_active { |
||||
/* Tele Cam RESET */ |
||||
mux { |
||||
pins = "gpio42"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio42"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_reset_suspend: rcam2_sensor_reset_suspend { |
||||
/* Tele Cam RESET */ |
||||
mux { |
||||
pins = "gpio42"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio42"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
|
||||
|
||||
rcam4_sensor_reset_active: rcam4_sensor_reset_active { |
||||
/* Macro Cam RESET */ |
||||
mux { |
||||
pins = "gpio24"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio24"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_reset_suspend: rcam4_sensor_reset_suspend { |
||||
/* Macro Cam RESET */ |
||||
mux { |
||||
pins = "gpio24"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio24"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam1_sensor_vana_active: rcam1_sensor_vana_active { |
||||
/* Rear VANA */ |
||||
mux { |
||||
pins = "gpio63"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio63"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam1_sensor_vana_suspend: rcam1_sensor_vana_suspend { |
||||
/* Rear VANA */ |
||||
mux { |
||||
pins = "gpio63"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio63"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_vana_active: rcam2_sensor_vana_active { |
||||
/* Tele VANA */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam2_sensor_vana_suspend: rcam2_sensor_vana_suspend { |
||||
/* Tele VANA */ |
||||
mux { |
||||
pins = "gpio64"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio64"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
|
||||
rcam3_sensor_vana_active: rcam3_sensor_vana_active { |
||||
/* UW VANA */ |
||||
mux { |
||||
pins = "gpio65"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio65"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
rcam3_sensor_vana_suspend: rcam3_sensor_vana_suspend { |
||||
/* UW VANA */ |
||||
mux { |
||||
pins = "gpio65"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio65"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vana_active: rcam4_sensor_vana_active { |
||||
/* Macro VANA */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vana_suspend: rcam4_sensor_vana_suspend { |
||||
/* Macro VANA */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
cam_mipi_sel_active: cam_mipi_sel_active { |
||||
/* MIPI SEL */ |
||||
mux { |
||||
pins = "gpio66"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio66"; |
||||
bias-disable; |
||||
output-high; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
cam_mipi_sel_suspend: cam_mipi_sel_suspend { |
||||
/* MIPI SEL */ |
||||
mux { |
||||
pins = "gpio66"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio66"; |
||||
bias-pull-down; |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam3_sensor_vdig_active: rcam3_sensor_vdig_active { |
||||
/* UW VDIG */ |
||||
mux { |
||||
pins = "gpio65"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio65"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam3_sensor_vdig_suspend: rcam3_sensor_vdig_suspend { |
||||
/* UW VDIG */ |
||||
mux { |
||||
pins = "gpio65"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio65"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
|
||||
rcam4_sensor_vdig_active: rcam4_sensor_vdig_active { |
||||
/* Macro VDIG */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-disable; /* No PULL */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
rcam4_sensor_vdig_suspend: rcam4_sensor_vdig_suspend { |
||||
/* Macro VDIG */ |
||||
mux { |
||||
pins = "gpio74"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio74"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
if_pmic_i2c_pins: if_pmic_i2c_pins { |
||||
if_pmic_i2c_sleep: if_pmic_i2c_sleep { |
||||
mux { |
||||
pins = "gpio115", "gpio116"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio115", "gpio116"; |
||||
drive-strength = <2>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
usbpd_i2c_pins: usbpd_i2c_pins { |
||||
usbpd_i2c_sleep: usbpd_i2c_sleep { |
||||
mux { |
||||
pins = "gpio53", "gpio54"; |
||||
function = "gpio"; |
||||
}; |
||||
|
||||
config { |
||||
pins = "gpio53", "gpio54"; |
||||
drive-strength = <2>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
mcu_reset_active: mcu_reset_active { |
||||
/* MCU Reset */ |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
bias-disable; /* No PULL */ |
||||
//output-high; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
mcu_reset_suspend: mcu_reset_suspend { |
||||
/* MCU Reset */ |
||||
mux { |
||||
pins = "gpio32"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio32"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
mcu_clk_active: mcu_clk_active { |
||||
/* MCU CLK */ |
||||
mux { |
||||
pins = "gpio43"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio43"; |
||||
bias-disable; /* No PULL */ |
||||
//output-high; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
|
||||
mcu_clk_suspend: mcu_clk_suspend { |
||||
/* MCU Reset */ |
||||
mux { |
||||
pins = "gpio43"; |
||||
function = "gpio"; |
||||
}; |
||||
config { |
||||
pins = "gpio43"; |
||||
bias-pull-down; /* PULL DOWN */ |
||||
output-low; |
||||
drive-strength = <2>; /* 2 MA */ |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_gpios { |
||||
grip_int_active: grip_int_active { |
||||
pins = "gpio5"; |
||||
function = "normal"; |
||||
power-source = <0>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
grip_int_suspend: grip_int_suspend { |
||||
pins = "gpio5"; |
||||
function = "normal"; |
||||
power-source = <0>; |
||||
input-enable; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* SPI : NFC_ESE_MISO */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* NC : NC */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
67 /* EN : BTP_LDO_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
74 /* EN : RCAM4_LDO_EN */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* EN : NFC_ESE_EN */ |
||||
>; |
||||
}; |
||||
@ -1,56 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* SPI : NFC_ESE_MISO */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* NC : NC */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
74 /* EN : RCAM4_LDO_EN */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* EN : NFC_ESE_EN */ |
||||
>; |
||||
}; |
||||
@ -1,57 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* NC : NC */ |
||||
3 /* NC : NC */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* NC : NC */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
74 /* EN : RCAM4_LDO_EN */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* NC : NC */ |
||||
>; |
||||
}; |
||||
@ -1,15 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
|
||||
}; |
||||
@ -1,57 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
&tlmm { |
||||
wakeup-disabled-gpios = < |
||||
0 /* NC : NC */ |
||||
3 /* NC : NC */ |
||||
6 /* I2C : TSP_SDA_1P8 */ |
||||
16 /* MCLK : RCAM4_MCLK */ |
||||
21 /* RST_N : FCAM_RST_N */ |
||||
22 /* EN : CAM_FLASH_EN */ |
||||
23 /* MCLK : FCAM_MCLK */ |
||||
24 /* RST_N : RCAM4_RST_N */ |
||||
26 /* I2C : CAM_PMIC_I2C_SCL_1P8 */ |
||||
28 /* I2C : FCAM_RCAM2_RCAM4_SENSOR_I2C_SCL_1P8 */ |
||||
30 /* RST_N : RCAM1_RST_N */ |
||||
34 /* I2C : NFC_SDA_1P8 */ |
||||
37 /* LAGOON : NFC_IRQ */ |
||||
42 /* RST_N : RCAM2_RST_N */ |
||||
45 /* UART : AP_UART_RXD */ |
||||
47 /* I2C : CAM_AF_EEP_I2C_SCL_1P8 */ |
||||
52 /* I2C : GRIP_SCL_1P8 */ |
||||
53 /* I2C : CC_SDA_1P8 */ |
||||
55 /* NC : NC */ |
||||
56 /* NC : NC */ |
||||
57 /* EN : MOT_EN */ |
||||
58 /* RST_N : CODEC_RST_N */ |
||||
59 /* SPI : BTP_SPI_MISO */ |
||||
62 /* SPI : BTP_SPI_CS_N */ |
||||
63 /* EN : RCAM1_LDO_EN */ |
||||
64 /* EN : RCAM2_LDO_EN */ |
||||
65 /* EN : RCAM3_LDO_EN */ |
||||
67 /* EN : CAM_TORCH_EN */ |
||||
68 /* EN : NFC_LDO_EN */ |
||||
74 /* EN : RCAM4_LDO_EN */ |
||||
78 /* NC : NC */ |
||||
84 /* EN : FM_LNA_EN */ |
||||
86 /* I2C : AP_MCU_SDA_1P8 */ |
||||
87 /* I2C : AP_MCU_SCL_1P8 */ |
||||
88 /* I2C : SPK_AMP_SDA_1P8 */ |
||||
89 /* I2C : SPK_AMP_SCL_1P8 */ |
||||
91 /* RST_N : BTP_RST_N */ |
||||
94 /* EN : SPK_AMP_EN */ |
||||
115 /* I2C : IF_PMIC_SDA_1P8 */ |
||||
116 /* I2C : IF_PMIC_SCL_1P8 */ |
||||
118 /* NC : NC */ |
||||
>; |
||||
}; |
||||
@ -1,169 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-pm-common.dtsi" |
||||
|
||||
&soc { |
||||
/* AP Thermistor table */ |
||||
sec_thermistor@0 { |
||||
compatible = "samsung,sec-ap-thermistor"; |
||||
status = "okay"; |
||||
io-channels = <&pm6150_vadc ADC_AMUX_THM2_PU2>; |
||||
io-channel-names = "ap_therm"; |
||||
adc_array = <1806 2208 2620 3076 3638 4355 5223 |
||||
6133 7170 8378 9652 11107 12609 |
||||
14233 15644 17608 19255 20912 22081 23487 24556 25655 26345>; |
||||
temp_array = <900 850 800 750 700 650 600 |
||||
550 500 450 400 350 300 |
||||
250 200 150 100 50 0 (-50) (-100) (-150) (-200)>; |
||||
}; |
||||
|
||||
/* PA Thermistor table */ |
||||
sec_thermistor@1 { |
||||
compatible = "samsung,sec-pa-thermistor"; |
||||
status = "okay"; |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM2_PU2>; |
||||
io-channel-names = "pa_therm"; |
||||
adc_array = <1861 2268 2690 3132 3730 4397 5278 |
||||
6198 7233 8479 9782 11209 12707 |
||||
14338 15719 17722 19343 20876 22320 23575 24750 25730 26411>; |
||||
temp_array = <900 850 800 750 700 650 600 |
||||
550 500 450 400 350 300 |
||||
250 200 150 100 50 0 (-50) (-100) (-150) (-200)>; |
||||
}; |
||||
|
||||
/* WiFi Thermistor table */ |
||||
sec_thermistor@2 { |
||||
compatible = "samsung,sec-wf-thermistor"; |
||||
status = "okay"; |
||||
io-channels = <&pm6150l_vadc ADC_AMUX_THM3_PU2>; |
||||
io-channel-names = "wf_therm"; |
||||
adc_array = <1875 2270 2703 3149 3738 4416 5279 |
||||
6205 7252 8470 9774 11227 12737 |
||||
14358 15740 17754 19334 20932 22258 23619 24773 25779 26501>; |
||||
temp_array = <900 850 800 750 700 650 600 |
||||
550 500 450 400 350 300 |
||||
250 200 150 100 50 0 (-50) (-100) (-150) (-200)>; |
||||
}; |
||||
|
||||
/* S2MPB03 Camera PMIC */ |
||||
i2c2: i2c@2 { |
||||
cell-index = <2>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 25 0 /* sda */ |
||||
&tlmm 26 0 /* scl */ |
||||
>; |
||||
#i2c-gpio,delay-us = <2>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&s2mpb03_i2c_sda_default &s2mpb03_i2c_scl_default>; |
||||
|
||||
/* S2MPB03 Camera PMIC */ |
||||
s2mpb03@56 { |
||||
compatible = "samsung,s2mpb03pmic"; |
||||
reg = <0x56>; |
||||
additional_reg_init; |
||||
|
||||
regulators { |
||||
s2mpb03_l1: s2mpb03-ldo1 { |
||||
regulator-name = "s2mpb03-ldo1"; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1050000>; |
||||
}; |
||||
|
||||
s2mpb03_l2: s2mpb03-ldo2 { |
||||
regulator-name = "s2mpb03-ldo2"; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1100000>; |
||||
}; |
||||
|
||||
s2mpb03_l3: s2mpb03-ldo3 { |
||||
regulator-name = "s2mpb03-ldo3"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
}; |
||||
|
||||
s2mpb03_l4: s2mpb03-ldo4 { |
||||
regulator-name = "s2mpb03-ldo4"; |
||||
regulator-min-microvolt = <1100000>; |
||||
regulator-max-microvolt = <1100000>; |
||||
}; |
||||
|
||||
s2mpb03_l5: s2mpb03-ldo5 { |
||||
regulator-name = "s2mpb03-ldo5"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2900000>; |
||||
}; |
||||
|
||||
s2mpb03_l6: s2mpb03-ldo6 { |
||||
regulator-name = "s2mpb03-ldo6"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2900000>; |
||||
}; |
||||
|
||||
s2mpb03_l7: s2mpb03-ldo7 { |
||||
regulator-name = "s2mpb03-ldo7"; |
||||
regulator-min-microvolt = <2800000>; |
||||
regulator-max-microvolt = <2900000>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150_gpios { |
||||
interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc1 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc2 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc3 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc4 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc6 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc7 0 IRQ_TYPE_NONE>, |
||||
<0x0 0xc9 0 IRQ_TYPE_NONE>; |
||||
interrupt-names = "pm6150_gpio1", "pm6150_gpio2", |
||||
"pm6150_gpio3", "pm6150_gpio4", "pm6150_gpio5", |
||||
"pm6150_gpio7", "pm6150_gpio8", |
||||
"pm6150_gpio10"; |
||||
qcom,gpios-disallowed = <6 9>; |
||||
}; |
||||
|
||||
&pm6150_vadc { |
||||
ap_therm { |
||||
reg = <ADC_AMUX_THM2_PU2>; |
||||
label = "ap_therm"; |
||||
qcom,ratiometric; |
||||
qcom,hw-settle-time = <200>; |
||||
qcom,pre-scaling = <1 1>; |
||||
}; |
||||
}; |
||||
|
||||
&pm6150l_vadc { |
||||
/delete-node/ pa_therm0; |
||||
|
||||
pa_therm { |
||||
reg = <ADC_AMUX_THM2_PU2>; |
||||
label = "pa_therm"; |
||||
qcom,ratiometric; |
||||
qcom,hw-settle-time = <200>; |
||||
qcom,pre-scaling = <1 1>; |
||||
}; |
||||
|
||||
wf_therm { |
||||
reg = <ADC_AMUX_THM3_PU2>; |
||||
label = "wf_therm"; |
||||
qcom,ratiometric; |
||||
qcom,hw-settle-time = <200>; |
||||
qcom,pre-scaling = <1 1>; |
||||
}; |
||||
}; |
||||
@ -1,99 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a72q-common.dtsi" |
||||
#include "drivers/atoll-sec-a72q-audio-common.dtsi" |
||||
#include "atoll-sec-a72q-pinctrl-r00.dtsi" |
||||
#include "atoll-sec-a72q-pm-common.dtsi" |
||||
#include "drivers/atoll-sec-a72q-display-r00.dtsi" |
||||
#include "atoll-sec-a72q-input-common.dtsi" |
||||
#include "drivers/atoll-sec-a72q-usb-r00.dtsi" |
||||
#include "drivers/atoll-sec-a52q-nfc_r00.dtsi" |
||||
#include "drivers/atoll-sec-a72q-fingerprint-r00.dtsi" |
||||
#include "drivers/atoll-sec-a72q-camera-sensor-common.dtsi" |
||||
#include "drivers/atoll-sec-a72q-vibrator-r00.dtsi" |
||||
#include "drivers/atoll-sec-a72q-hall-r00.dtsi" |
||||
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
||||
|
||||
&soc { |
||||
rpmh-regulator-ldoc8 { |
||||
|
||||
compatible = "qcom,rpmh-vrm-regulator"; |
||||
mboxes = <&apps_rsc 0>; |
||||
qcom,resource-name = "ldoc8"; |
||||
qcom,regulator-type = "pmic5-ldo"; |
||||
qcom,supported-modes = |
||||
<RPMH_REGULATOR_MODE_LPM |
||||
RPMH_REGULATOR_MODE_HPM>; |
||||
qcom,mode-threshold-currents = <0 1>; |
||||
L8C: |
||||
pm6150l_l8: regulator-pm6150l-l8 { |
||||
regulator-name = "pm6150l_l8"; |
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
qcom,init-voltage = <1800000>; |
||||
regulator-always-on; |
||||
qcom,init-mode = |
||||
<RPMH_REGULATOR_MODE_LPM>; |
||||
}; |
||||
}; |
||||
|
||||
//Grip Sensor Vdd |
||||
rpmh-regulator-ldoa5 { |
||||
pm6150_l5: regulator-pm6150-l5 { |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
qcom,init-voltage = <3300000>; |
||||
regulator-always-on; |
||||
}; |
||||
}; |
||||
|
||||
i2c_17: i2c@17 { /* SW I2C */ |
||||
status = "ok"; |
||||
|
||||
cell-index = <17>; |
||||
compatible = "i2c-gpio"; |
||||
gpios = <&tlmm 51 0 /* sda */ |
||||
&tlmm 52 0 /* scl */ |
||||
>; |
||||
#i2c-gpio,delay-us = <2>; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&grip_i2c_active>; |
||||
|
||||
sx9360-i2c@28 { |
||||
compatible = "sx9360"; |
||||
reg = <0x28>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&grip_int_active>; |
||||
|
||||
interrupt-parent = <&spmi_bus>; |
||||
interrupts = <0x4 0xc4 0 IRQ_TYPE_EDGE_FALLING>; |
||||
|
||||
sx9360,nirq-gpio = <&pm6150l_gpios 5 GPIO_ACTIVE_LOW>; |
||||
sx9360,reggnrlctrl2_reg = <0x32>; /* scanperiod: 102ms */ |
||||
sx9360,againfreq_reg = <0x38>; /* freq : 62.5 kHz, again : +/-5.25 pF */ |
||||
sx9360,refagainfreq_reg = <0x36>; /* reference phase again : 5.25 pF, sampling freq : 83.33 khz */ |
||||
sx9360,gainrawfilt_reg = <0x1A>; /* gain: x4, rawfilt : 1-1/4 */ |
||||
sx9360,refgainrawfilt_reg = <0x22>; /* reference phase gain: x8, rawfilt : 1-1/4 */ |
||||
sx9360,proxthresh_reg = <0x22>; /* threshold: 614 */ |
||||
sx9360,hyst_reg = <0x15>; /* hysteresis: small, closedeb: 2 samples, fardeb: 2 samples */ |
||||
sx9360,regproxctrl3_reg = <0x0C>; /* AVGPOSFILT: 1/256, AVGNEGFILT: 1/2 */ |
||||
sx9360,resolution_reg = <0x0F>; /* resolution: 1204 */ |
||||
sx9360,refresolution_reg = <0x0F>; /* reference phase resolution: 1204 */ |
||||
sx9360,hallic_cert_detect = <1>; |
||||
}; |
||||
}; |
||||
}; |
||||
@ -1,18 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a72q-r00.dtsi" |
||||
#include "atoll-sec-a72q-pinctrl-r01.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
@ -1,19 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a72q-r01.dtsi" |
||||
#include "atoll-sec-a72q-pinctrl-r02.dtsi" |
||||
#include "drivers/atoll-sec-a72q-camera-sensor-r02.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
@ -1,18 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a72q-r02.dtsi" |
||||
#include "atoll-sec-a72q-pinctrl-r04.dtsi" |
||||
|
||||
&soc { |
||||
|
||||
}; |
||||
@ -1,25 +0,0 @@ |
||||
/* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 and |
||||
* only version 2 as published by the Free Software Foundation. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
*/ |
||||
|
||||
#include "atoll-sec-a72q-r04.dtsi" |
||||
#include "atoll-sec-a72q-pinctrl-r05.dtsi" |
||||
|
||||
/delete-node/ &vibrator; |
||||
|
||||
&soc { |
||||
msm_vibrator { |
||||
compatible = "vibrator"; |
||||
motor-vdd_type = <0>; /* 0: gpio, 1: pmic */ |
||||
motor-en = <&tlmm 57 0x0>; |
||||
samsung,vib_type = "COINDC"; |
||||
}; |
||||
}; |
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in new issue