You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kernel_samsung_sm7125/arch/um/os-Linux/skas/process.c

574 lines
15 KiB

/*
* Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com)
* Licensed under the GPL
*/
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <signal.h>
#include <setjmp.h>
#include <sched.h>
#include "ptrace_user.h"
#include <sys/wait.h>
#include <sys/mman.h>
#include <sys/user.h>
#include <sys/time.h>
#include <asm/unistd.h>
#include <asm/types.h>
#include "user.h"
#include "sysdep/ptrace.h"
#include "user_util.h"
#include "kern_util.h"
#include "skas.h"
#include "stub-data.h"
#include "mm_id.h"
#include "sysdep/sigcontext.h"
#include "sysdep/stub.h"
#include "os.h"
#include "proc_mm.h"
#include "skas_ptrace.h"
#include "chan_user.h"
#include "registers.h"
#include "mem.h"
#include "uml-config.h"
#include "process.h"
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
#include "longjmp.h"
int is_skas_winch(int pid, int fd, void *data)
{
if(pid != os_getpgrp())
return(0);
register_winch_irq(-1, fd, -1, data);
return(1);
}
void wait_stub_done(int pid, int sig, char * fname)
{
int n, status, err;
do {
if ( sig != -1 ) {
err = ptrace(PTRACE_CONT, pid, 0, sig);
if(err)
panic("%s : continue failed, errno = %d\n",
fname, errno);
}
sig = 0;
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
} while((n >= 0) && WIFSTOPPED(status) &&
((WSTOPSIG(status) == SIGVTALRM) ||
/* running UML inside a detached screen can cause
* SIGWINCHes
*/
(WSTOPSIG(status) == SIGWINCH)));
if((n < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
unsigned long regs[HOST_FRAME_SIZE];
if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
printk("Failed to get registers from stub, "
"errno = %d\n", errno);
else {
int i;
printk("Stub registers -\n");
for(i = 0; i < HOST_FRAME_SIZE; i++)
printk("\t%d - %lx\n", i, regs[i]);
}
panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
"pid = %d, n = %d, errno = %d, status = 0x%x\n",
fname, pid, n, errno, status);
}
}
extern unsigned long current_stub_stack(void);
void get_skas_faultinfo(int pid, struct faultinfo * fi)
{
int err;
if(ptrace_faultinfo){
err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
if(err)
panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
"errno = %d\n", errno);
/* Special handling for i386, which has different structs */
if (sizeof(struct ptrace_faultinfo) < sizeof(struct faultinfo))
memset((char *)fi + sizeof(struct ptrace_faultinfo), 0,
sizeof(struct faultinfo) -
sizeof(struct ptrace_faultinfo));
}
else {
wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo");
/* faultinfo is prepared by the stub-segv-handler at start of
* the stub stack page. We just have to copy it.
*/
memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
}
}
static void handle_segv(int pid, union uml_pt_regs * regs)
{
get_skas_faultinfo(pid, &regs->skas.faultinfo);
segv(regs->skas.faultinfo, 0, 1, NULL);
}
/*To use the same value of using_sysemu as the caller, ask it that value (in local_using_sysemu)*/
static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu)
{
int err, status;
/* Mark this as a syscall */
UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->skas.regs);
if (!local_using_sysemu)
{
err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
__NR_getpid);
if(err < 0)
panic("handle_trap - nullifying syscall failed errno = %d\n",
errno);
err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
if(err < 0)
panic("handle_trap - continuing to end of syscall failed, "
"errno = %d\n", errno);
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
if((err < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGTRAP + 0x80))
panic("handle_trap - failed to wait at end of syscall, "
"errno = %d, status = %d\n", errno, status);
}
handle_syscall(regs);
}
extern int __syscall_stub_start;
static int userspace_tramp(void *stack)
{
void *addr;
ptrace(PTRACE_TRACEME, 0, 0, 0);
init_new_thread_signals(1);
enable_timer();
if(!proc_mm){
/* This has a pte, but it can't be mapped in with the usual
* tlb_flush mechanism because this is part of that mechanism
*/
int fd;
__u64 offset;
fd = phys_mapping(to_phys(&__syscall_stub_start), &offset);
addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(),
PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset);
if(addr == MAP_FAILED){
printk("mapping mmap stub failed, errno = %d\n",
errno);
exit(1);
}
if(stack != NULL){
fd = phys_mapping(to_phys(stack), &offset);
addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(),
PROT_READ | PROT_WRITE,
MAP_FIXED | MAP_SHARED, fd, offset);
if(addr == MAP_FAILED){
printk("mapping segfault stack failed, "
"errno = %d\n", errno);
exit(1);
}
}
}
if(!ptrace_faultinfo && (stack != NULL)){
unsigned long v = UML_CONFIG_STUB_CODE +
(unsigned long) stub_segv_handler -
(unsigned long) &__syscall_stub_start;
set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size());
set_handler(SIGSEGV, (void *) v, SA_ONSTACK,
SIGIO, SIGWINCH, SIGALRM, SIGVTALRM,
SIGUSR1, -1);
}
os_stop_process(os_getpid());
return(0);
}
/* Each element set once, and only accessed by a single processor anyway */
#undef NR_CPUS
#define NR_CPUS 1
int userspace_pid[NR_CPUS];
int start_userspace(unsigned long stub_stack)
{
void *stack;
unsigned long sp;
int pid, status, n, flags;
stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if(stack == MAP_FAILED)
panic("start_userspace : mmap failed, errno = %d", errno);
sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
flags = CLONE_FILES | SIGCHLD;
if(proc_mm) flags |= CLONE_VM;
pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
if(pid < 0)
panic("start_userspace : clone failed, errno = %d", errno);
do {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
if(n < 0)
panic("start_userspace : wait failed, errno = %d",
errno);
} while(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
panic("start_userspace : expected SIGSTOP, got status = %d",
status);
if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, (void *)PTRACE_O_TRACESYSGOOD) < 0)
panic("start_userspace : PTRACE_OLDSETOPTIONS failed, errno=%d\n",
errno);
if(munmap(stack, PAGE_SIZE) < 0)
panic("start_userspace : munmap failed, errno = %d\n", errno);
return(pid);
}
void userspace(union uml_pt_regs *regs)
{
int err, status, op, pid = userspace_pid[0];
int local_using_sysemu; /*To prevent races if using_sysemu changes under us.*/
while(1){
restore_registers(pid, regs);
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
op = SELECT_PTRACE_OPERATION(local_using_sysemu, singlestepping(NULL));
err = ptrace(op, pid, 0, 0);
if(err)
panic("userspace - could not resume userspace process, "
"pid=%d, ptrace operation = %d, errno = %d\n",
pid, op, errno);
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
if(err < 0)
panic("userspace - waitpid failed, errno = %d\n",
errno);
regs->skas.is_user = 1;
save_registers(pid, regs);
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
if(WIFSTOPPED(status)){
switch(WSTOPSIG(status)){
case SIGSEGV:
if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo)
user_signal(SIGSEGV, regs, pid);
else handle_segv(pid, regs);
break;
case SIGTRAP + 0x80:
handle_trap(pid, regs, local_using_sysemu);
break;
case SIGTRAP:
relay_signal(SIGTRAP, regs);
break;
case SIGIO:
case SIGVTALRM:
case SIGILL:
case SIGBUS:
case SIGFPE:
case SIGWINCH:
user_signal(WSTOPSIG(status), regs, pid);
break;
default:
printk("userspace - child stopped with signal "
"%d\n", WSTOPSIG(status));
}
pid = userspace_pid[0];
interrupt_end();
/* Avoid -ERESTARTSYS handling in host */
if(PT_SYSCALL_NR_OFFSET != PT_SYSCALL_RET_OFFSET)
PT_SYSCALL_NR(regs->skas.regs) = -1;
}
}
}
int copy_context_skas0(unsigned long new_stack, int pid)
{
int err;
unsigned long regs[HOST_FRAME_SIZE];
unsigned long fp_regs[HOST_FP_SIZE];
unsigned long current_stack = current_stub_stack();
struct stub_data *data = (struct stub_data *) current_stack;
struct stub_data *child_data = (struct stub_data *) new_stack;
__u64 new_offset;
int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset);
/* prepare offset and fd of child's stack as argument for parent's
* and child's mmap2 calls
*/
*data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset),
.fd = new_fd,
.timer = ((struct itimerval)
{ { 0, 1000000 / hz() },
{ 0, 1000000 / hz() }})});
get_safe_registers(regs, fp_regs);
/* Set parent's instruction pointer to start of clone-stub */
regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
(unsigned long) stub_clone_handler -
(unsigned long) &__syscall_stub_start;
regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE -
sizeof(void *);
#ifdef __SIGNAL_FRAMESIZE
regs[REGS_SP_INDEX] -= __SIGNAL_FRAMESIZE;
#endif
err = ptrace_setregs(pid, regs);
if(err < 0)
panic("copy_context_skas0 : PTRACE_SETREGS failed, "
"pid = %d, errno = %d\n", pid, errno);
err = ptrace_setfpregs(pid, fp_regs);
if(err < 0)
panic("copy_context_skas0 : PTRACE_SETFPREGS failed, "
"pid = %d, errno = %d\n", pid, errno);
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
/* Wait, until parent has finished its work: read child's pid from
* parent's stack, and check, if bad result.
*/
wait_stub_done(pid, 0, "copy_context_skas0");
pid = data->err;
if(pid < 0)
panic("copy_context_skas0 - stub-parent reports error %d\n",
pid);
/* Wait, until child has finished too: read child's result from
* child's stack and check it.
*/
wait_stub_done(pid, -1, "copy_context_skas0");
if (child_data->err != UML_CONFIG_STUB_DATA)
panic("copy_context_skas0 - stub-child reports error %ld\n",
child_data->err);
if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
(void *)PTRACE_O_TRACESYSGOOD) < 0)
panic("copy_context_skas0 : PTRACE_OLDSETOPTIONS failed, "
"errno = %d\n", errno);
return pid;
}
/*
* This is used only, if stub pages are needed, while proc_mm is
* availabl. Opening /proc/mm creates a new mm_context, which lacks
* the stub-pages. Thus, we map them using /proc/mm-fd
*/
void map_stub_pages(int fd, unsigned long code,
unsigned long data, unsigned long stack)
{
struct proc_mm_op mmop;
int n;
__u64 code_offset;
int code_fd = phys_mapping(to_phys((void *) &__syscall_stub_start),
&code_offset);
mmop = ((struct proc_mm_op) { .op = MM_MMAP,
.u =
{ .mmap =
{ .addr = code,
.len = PAGE_SIZE,
.prot = PROT_EXEC,
.flags = MAP_FIXED | MAP_PRIVATE,
.fd = code_fd,
.offset = code_offset
} } });
n = os_write_file(fd, &mmop, sizeof(mmop));
if(n != sizeof(mmop))
panic("map_stub_pages : /proc/mm map for code failed, "
"err = %d\n", -n);
if ( stack ) {
__u64 map_offset;
int map_fd = phys_mapping(to_phys((void *)stack), &map_offset);
mmop = ((struct proc_mm_op)
{ .op = MM_MMAP,
.u =
{ .mmap =
{ .addr = data,
.len = PAGE_SIZE,
.prot = PROT_READ | PROT_WRITE,
.flags = MAP_FIXED | MAP_SHARED,
.fd = map_fd,
.offset = map_offset
} } });
n = os_write_file(fd, &mmop, sizeof(mmop));
if(n != sizeof(mmop))
panic("map_stub_pages : /proc/mm map for data failed, "
"err = %d\n", -n);
}
}
void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
void (*handler)(int))
{
unsigned long flags;
sigjmp_buf switch_buf, fork_buf;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
int enable;
*switch_buf_ptr = &switch_buf;
*fork_buf_ptr = &fork_buf;
/* Somewhat subtle - siglongjmp restores the signal mask before doing
* the longjmp. This means that when jumping from one stack to another
* when the target stack has interrupts enabled, an interrupt may occur
* on the source stack. This is bad when starting up a process because
* it's not supposed to get timer ticks until it has been scheduled.
* So, we disable interrupts around the sigsetjmp to ensure that
* they can't happen until we get back here where they are safe.
*/
flags = get_signals();
block_signals();
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
if(UML_SIGSETJMP(&fork_buf, enable) == 0)
new_thread_proc(stack, handler);
remove_sigstack();
set_signals(flags);
}
#define INIT_JMP_NEW_THREAD 0
#define INIT_JMP_REMOVE_SIGSTACK 1
#define INIT_JMP_CALLBACK 2
#define INIT_JMP_HALT 3
#define INIT_JMP_REBOOT 4
void thread_wait(void *sw, void *fb)
{
sigjmp_buf buf, **switch_buf = sw, *fork_buf;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
int enable;
*switch_buf = &buf;
fork_buf = fb;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
if(UML_SIGSETJMP(&buf, enable) == 0)
siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
}
void switch_threads(void *me, void *next)
{
sigjmp_buf my_buf, **me_ptr = me, *next_buf = next;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
int enable;
*me_ptr = &my_buf;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
if(UML_SIGSETJMP(&my_buf, enable) == 0)
UML_SIGLONGJMP(next_buf, 1);
}
static sigjmp_buf initial_jmpbuf;
/* XXX Make these percpu */
static void (*cb_proc)(void *arg);
static void *cb_arg;
static sigjmp_buf *cb_back;
int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
{
sigjmp_buf **switch_buf = switch_buf_ptr;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
int n, enable;
set_handler(SIGWINCH, (__sighandler_t) sig_handler,
SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
SIGVTALRM, -1);
*fork_buf_ptr = &initial_jmpbuf;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
n = UML_SIGSETJMP(&initial_jmpbuf, enable);
switch(n){
case INIT_JMP_NEW_THREAD:
new_thread_proc((void *) stack, new_thread_handler);
break;
case INIT_JMP_REMOVE_SIGSTACK:
remove_sigstack();
break;
case INIT_JMP_CALLBACK:
(*cb_proc)(cb_arg);
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
UML_SIGLONGJMP(cb_back, 1);
break;
case INIT_JMP_HALT:
kmalloc_ok = 0;
return(0);
case INIT_JMP_REBOOT:
kmalloc_ok = 0;
return(1);
default:
panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
}
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
UML_SIGLONGJMP(*switch_buf, 1);
}
void initial_thread_cb_skas(void (*proc)(void *), void *arg)
{
sigjmp_buf here;
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
int enable;
cb_proc = proc;
cb_arg = arg;
cb_back = &here;
block_signals();
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
if(UML_SIGSETJMP(&here, enable) == 0)
UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
unblock_signals();
cb_proc = NULL;
cb_arg = NULL;
cb_back = NULL;
}
void halt_skas(void)
{
block_signals();
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_HALT);
}
void reboot_skas(void)
{
block_signals();
[PATCH] uml: implement soft interrupts This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT);
}
void switch_mm_skas(struct mm_id *mm_idp)
{
int err;
#warning need cpu pid in switch_mm_skas
if(proc_mm){
err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0,
mm_idp->u.mm_fd);
if(err)
panic("switch_mm_skas - PTRACE_SWITCH_MM failed, "
"errno = %d\n", errno);
}
else userspace_pid[0] = mm_idp->u.pid;
}